00571-G5 WASHER.
SPINDLE, EZ 96-UP ST350
Steel
flat washer. Measures approximately .55" (14mm) I.D. x 1.39" (35.3mm)
O.D.x.10" (2.7mm) thick.
Used
On: E-Z-Go gas 96-UP (Workhorse ST350).
|
00139-G6
SCREW, 6-32 x 1-3/4"
UM:10
#6-32
x 1 3/4" screw. Used with P/N 10606-G2
micro switch.
|
||
|
00407G6BOLT,
SPINDLE, EZ 01-UP
|
||
|
Bolt
for king pin tube, 1/2-13 x 6r L (Used on
2001 models produced Jan. 2001 - UP)
Used
On: E-Z-Go gas and electric 01-UP (TXT).
|
||
|
o
|
||
|
00565-G3WASHER,
LOCK, #6
UM
50
#6
split type, zinc plated steel lock washer.
|
||
|
00571-G5 WASHER.
SPINDLE, EZ 96-UP ST350
|
|||
|
|
Steel
flat washer. Measures approximately .55" (14mm) I.D. x 1.39" (35.3mm)
O.D.x.10" (2.7mm) thick.
Used
On: E-Z-Go gas 96-UP (Workhorse ST350).
|
||
|
00660-G8WASHER,
FLAT, 5/16" x 5/8", SS
UM:50
|
||
|
o
|
||
|
00664-G8WASHER,
LOCK, 5/16", SS
UM:SO
5/16"
split type, stainless steel lock washer.
|
||
|
00685G9SCREW.
CAR SS, 5/16"-18 X 2"
UM:10
5/16*18
x 2" stainless steel hex head cap screw, fully threaded.
|
||
|
00740G4
SCREW, TRUSS HEAD, PHIL SS, 10-32x1/2
UM
10
For
E-Z-Go P/Ns 19886-G1 and 71205-G01 F/R handles.
|
||
|
00879-G7WASHER,
THRUST. 7/8". E2
|
|||
|
o
|
Steel
flat washer. Measures approximately .93" 123.7mm) I.D. x 1.47" (37.3mm)
O.D. x .10* (2.5mm) thick.
Used
On: E-Z-Go gas and electric.
|
||
|
00907-G3
WASHER, FLAT, 5/16" x 1-1/16, SS
UM50
5/16"
stainless-steel flat washer.
|
||
|
00952-G6
BOLT. HEX 5/16"-18 x 3/4"
UM10
5/16-18
x 3/4" hex head battery hold-down bolt.
|
||
|
01040-G01BOLT.
SPINDLE, EZ ST350, 9&-UP
|
||
|
1/2-13
x 5-1/4" long bolt fastens the front spindle to the front axle weldment.
Used with P/N's 70534-G01 and 70535-G01 spindles. Uses P/N 14390-G6 locknut.
Used
On: E-Z-Go gas 96-UP (Workhorse ST350).
|
||
|
1010125
|
BOLT,
SHOULDER, SHORT, CC 80-92
|
||
|
3/8-16
x 2" bolt fastens lower end of "A" plate to the front spindle.
Used
On: Club Car gas and electric 80-92.
|
|||
|
1010126BOLT,
SHOULDER, LONG. CC 80-92
|
||
|
3/8-16
x 4* bolt fastens upper end of "A" plate to the shock mount weldment.
Used
On: Club Car gas and electric 80-92.
|
||
 |
|||
|
1010145
|
NUT.
HEX. 3/8"-24
3/8-24
thread zinc plated steel nut. May be used as shackle nut and shock absorber
nut for Club Car and E-Z-Go.
|
||
|
1010877NUT,
PUSH, HILL BRAKE, CC 81-UP
|
|||
 |
Metal
push nut for rod and pawl assembly. Used with P/N 1016173 Hill brake
rod & pawl kit.
Used
On: Club Car gas and electric 81-UP IDS).
|
||
 |
|||
|
1011084
|
NUT,
JAM, 1/4"-28,CC
|
||
|
1011987SCREW,
SET, 1/4"-20 x 1/2"
|
|||
 |
Used
with F & R switch handle. Used with P/N
1010441 handle.
Used
On: Club Car gas and electric 70-84.
|
||
|
1011990WASHER,
FLAT. 3/8"
UM50
3/8"
steel flat washer.
|
||
|
1012462SCREW.
HEX, 1/4"-20 x 3-1/2"
UM10
1/4-20
x 3 1/2" hex head screw, 3/4" threaded.
|
||
|
1013198SCREW,
PHIL PH, #8-32 x 5/8"
UM20
#8-32
x 5/8" oval head, countersunk machine screw, approximately 5/8" L Used
with P/N 1012987 handle.
|
||
|
1013421NUT,
SPEED DOUBLE, CC 81-94
Double
nut plate for beverage holder. Stamped from mild zinc plated steel. Used
with P/N 1013422 cup holder.
Used
On: Club Car gas and electric 81-94.
|
||
|
1013461SCREW,
PHIL PH, #10-16 x 3/4"
UM:20
#10-16
screw used with P/N 1017065 headlight retainer clip.
|
||
|
1013876NUT,
PUSH, CC 80-UP
|
|||
|
o
|
Retainer
push nut for 3/8" diameter hill brake pedal shaft.
Used
On: Club Car gas and electric 80-UP.
|
||
 |
|||
|
1015068
|
NUT,
LOCK, 1/4"-20
1/4-20
thread nylon insert hex lock nut.
|
||
|
1016389 WASHER,
KINGPIN, CC 92-UP
|
|||
|
o
|
Spring
steel wavy tension washer for king pin (1 required for each side). Measures
approximately .780 I.D. x 1.010" O.D.x. 18" thick.
Used
On: Club Car gas and electric 92-UP IDS).
|
||
|
1016876BOLT,
BUMPER, REAR, CC 93-UP
|
|||
 |
Black
anodized shoulder-bolt with Phillip's head, Measures approximately 2* long
with 5/16-18 threads and 3/8* shoulder. Used with P/N 1016379 rear bumper.
Used
On: Club Car gas and electric 93-UP (DS).
|
||
|
1016952NUT.
U. 1/4"-20. CC 93-UP
|
|||
 |
1/4-20
thread "clip-on" U-nut. Used with P/N 1017083-01 cup holder.
Used
On: Club Car gas and electric 93-UP <DS).
|
||
|
1017029
|
COTTER
PIN, HILL BRAKE, CC 81-UP
|
||
|
UM
20
|
|||
|
7/64"
x 3/4" long stainless cotter pin for use on rod and pawl assembly.
Used
On: Club Car gas and electric 81-UP (OS).
|
|||
|
10387-G1COTTER
PIN, 1/8" x 1 1/2"
UM:20
|
||
|
1/8"
x 1-1/2" cotter pin. If you need a single cotter pin, order P/N 16155.
Used
On: Club Car gas and electric 74-UP (DS);
E-Z-Go gas and electric 76-94 (Marathon).
|
||
|
110RIVET.
1/4H, 1/8B. 1/16P. 5/8L
Head
1/4", body 1/8", pin 1/16" and body length 5/8". Small flange. Black anodized
aluminum. 50 per package.
|
||
|
11903G1CONTACT,
F&R, EZ 71-UP, NON DCS
Solid
brass stud with square head, 1-1/8" long and 5/16-18 threads.
Used
On: E-Z-Go electric 71-UP; Legend; Melex.
|
||
|
12064-G1NUT,
PUSH, 5/16"
|
|||
|
o
|
5/16"
push nut for hill brake pedal pin. Used On: Cushman; E-Z-Go; Noland.
|
||
|
12064-G2NUT,
PUSH ON, ACCELERATOR PIN, EZ
|
||
|
1/4"
push nut, one time use. Used On: EZGo.
|
||
|
12093-G1NUT,
SPINDLE. E2 81 UP
|
|||
 |
1-1/2"
hex-head spindle nut with 1-14 threads.
Used
On: E-Z-Go gas and electric 4-wheel,
81-UP.
|
||
|
13389-G1SCREW,
BRASS, #10-32 x 1/4"
UM:10
#10-32
x 1/4" brass machine screw for electric
motor crossovers.
|
||
|
13414-G1SCREW,
CHOKE DISC, CHD, EZ
|
||
|
Screw
for choke disc on Tlllotson carbu-retor.
Used with P/N 27674-66 choke disc
Used
On: Columbia/Harley gas 63-81; E-Z-Go 2-cycle gas 75 and earlier.
|
||
|
13427-G1SCREW.
CHOKE, CHD, EZ
|
||
|
Used
to fasten choke wire to Tillotson carburetor. Used with P/N 27715-61
wire block.
Used
On: Columbia/Hariey gas 63-81; E-Z-Go 2-cycle gas 75 and earlier.
|
||
|
13437-G1SCREW.
HEX, 5/16"-18 x 1"
UM
10
5/16-18
x 1" zinc plated steel hex head machine
screw.
|
||
 |
|||
|
14390-G1
|
NUT,
LOCK, 3/8"-24
Nylon
insert lock nut, 1/2-13 threads.
|
||
|
14390-G6 NUT,
LOCK, 1/2"-13
|
|||
 |
Lock
nut with nylon insert for use on front spindle bolt. Used with P/N's 01040-G01
and 70327-G01 bolts.
Used
On: E-Z-Go gas and electric 94-UP (TXT).
|
||
 |
|||
|
15039
|
NUT.
LOCK. #8-32
|
||
|
15040SCREW,
SLOTTED FH 1/4"-20x7/8H
UM:
10
1/4-20
x 7/8' slotted flat head machine screw.
|
||
|
15041SCREW,
CAP, 1/4"-20 x 1"
UM:
10
1/4-20
x 1" hex head cap screw. Used on P/N 1017083-01 cup holder.
|
||
|
15042SCREW,
HEX, SELF TAP, #14 x 3/4"
UM:10
#14
x 2(4" hex head self tapping screw used to mount P/N 1013422 cup
holder.
|
||
|
15043SCREW,
#10-16 x 1/2"
UM
10
#10-16x1/2"
screw.
|
||
|
NUT,
HEX, 3/8"-24.1/4" THICK
|
||
|
3/8-24
thread cadmium plated steel slotted hex nut, 1/4" thick.
Used
On: Many applications.
|
||
|
15045SCREW.
TRUSS HEAD, #10-32 x 1"
UM10
#10-32
x r cadmium plated steel slotted truss head machine screw.
|
||
|
15046SCREW,
CAP, #10-32 x 1/2"
UM
10
#10-32
x 1/2" cadmium plated steel Allen socket head cap screw.
|
||
|
15047
SCREW, 5/16"-18 x 9/16"
UM
10
5/1618x9/16"
screw.
|
||
|
15048SCREW.
PHIL PH, #8-32 x 3/8"
UM:1O
#8-32
x 3/8" zinc plated steel Phillips pan head self-tapping screw. For electric
-*.— motor brush rigs.
|
||
|
15051
|
NUT,
HEX SLOTTED. 5/8"-18
|
||
 |
5/8-18
thread slotted hex nut for securing hub to axle. If you don't need a bag
of 20 order IMC part number 16154.
Used
On: Columbia/Harley, gas and electric; Cushman; E-Z-Go electric 76-UP
and 2-cycle gas 78-93; Jacobsen; Pargo.
|
||
|
15055
|
RIVET.
5/8H. 3/16B. 1/8P, 1/2L BLK
Head
5/8", body 3/16', pin 1/8" and body length 1/2". Large flange with steel
mandrel. Black anodized aluminum. 100 per package.
|
||
|
15056RIVET.
5/16H. 5/32B. 3/32P, 9/16L
Head
5/16", body 5/32", pin 3/32" and body length 9/16". Small flange. 50 per package.
|
||
|
15057RIVET,
3/8H, 3/16B, 1/8P, 1/2L
Head
3/8*, body 3/16", pin 1/8" and body length 1/2*. Small flange. 50 per package.
|
||
|
15059RIVET.
3/8H. 3/16B, 1/8P, 3/4L
Head
3/8", body 3/16", pin 1/8" and body length
3/4". Small flange. 50 per package.
|
||
|
15061
|
RIVET.
5/8H, 3/16B, 1/8P, 1/2L
Head
5/8", body 3/16", pin 1/8" and body length 1/2". Large flange.
50 per package.
|
||
|
15063
|
RIVET,
5/8H, 3/16B, 1/8P, 3/4L
Head
5/8", body 3/16", pin 1/8" and body length 3/4". Large flange. 50 per
package.
|
||
|
15065RIVET,
3/8H, 3/16B, 1/8P, 5/8L
Head
3/8", body 3/16", pin 1/8' and body length 1/8". Small flange. 50 per package.
|
||
 |
||
|
15400LUG
NUT. CHROME 1/2"-20 (100)
1/2-20
high-luster chrome plated nut. Use with
P/Ns 15402 and 15393 polished aluminum
wheel.
Used
On: Club Car; Columbia/Harley; Cushman; E-Z-Go; Jacobsen; Melex; Nordskog;
Pargo; Taylor Dunn.
|
||
 |
|||
|
15428
|
NUT,
HEX, 5/16"-18
5/16-18
thread zinc plated steel nut for P/Ns 11846-G1, 15734-G2, 18262-G1 and
1013683 battery rods.
|
||
|
15485-G1WASHER,
REAR AXLE, EZ 77-01
|
|||
|
o
|
Stainless-steel
flat washer. Measures approximately .80' (20.3mm) I.D. x 1.16" <29.5mm)
O.D. x .03* (.8mm) thick. Used between wheel hub and bearing.
Used
On: E-Z-Go electric 77-01.
|
||
|
15487-G1WASHER.
BRAKE DRUM, EZ 77-81
|
|||
 |
Steel
flat washer. Measures approximately .66" (16.8mm) I.D. x 1.32" (33.5mm)
O.D. x .166" (4.2mm) thick. Used between castle nut and drum.
Used
On: E-Z-Go electric 77-81.
|
||
|
15546HOSE
CLAMP. SQUEEZE, 5/16"
|
|||
 |
Squeeze-type
clamp made for use on 5/16"
hose.
Used
On: Yamaha electric and gas G2-G22. Universal application on many golf
cars and industrial vehicles.
|
||
|
15547RIVET,
DRIVE. IVORY (250I
|
|||
 |
Plastic
rivet with center drive pin. Color matched to Yamaha ivory.
Used
On: Yamaha gas and electric 85-UP (G2-G22).
Universal application on many golf
cars and industrial vehicles.
|
||
|
15548WASHER,
FUT, .600
Flat
washer.
|
||
|
15573SCREW
STUD, #8-32 x .885
UM:
10
#8-32
x .89' cadmium plated steel screw (stud) for P/N 417 moving contact.
|
||
|
15580SCREW.
CAP BRASS, 1/4"-20xM/2"
UM:10
1/4-20
x 1-1/2" brass hex head cap screw.
|
||
|
15581SCREW,
CAP. 3/8"-16x 3/4"
UM:10
3/8-16
x 3/4" zinc plated steel hex head cap screw.
|
||
|
15582SCREW,
PHIL, 1/4"-20 x 3/4"
UM:10
1/4-20
x 3/4" Phillips truss head screw.
|
||
|
15584WASHER,
FLAT, 1/4". BRASS
UMLM
1/4"
brass flat washer.
|
||
 |
|||
|
15585
|
NUT,
JAM. 5/16--24
5/16-24
thread zinc plated steel jam nut.
|
||
|
15586SCREW,
BRASS 1/4"-20x 1-1/16"
UM:10
1/4-20
x 1-1/16" brass machine screw.
|
||
|
15587WASHER.
FLAT, 5/16" x 5/8"
UM:50
5/16"
steel flat washer.
|
||
|
15588SCREW,
CAP, 3/8"-16 x 1-1/2"
UM10
3/8-16
x 1-1/2" zinc plated steel hex head cap
screw.
|
||
 |
|||
|
15615
|
NUT,
HEX, 1/4--20
1/4-20
thread zinc plated steel nut for P/Ns 1013882. 18261-G2, 18261-G3, 19915-G1,
66323-80, 66561-75 battery rods.
|
||
 |
|||
|
15674
|
LUG
NUT, CHROME 12MM (100)
$2.00
UM; EA
12mm
high-luster chrome plated nut. Use with P/Ns 15402 and 15393 polished aluminum
wheel.
Used
On: Yamaha gas and electric 78-UP (G1,
G2, G8, G9, Gil. G14, G16, G19, G20,
G21, G22).
|
||
|
15766-G1RIVET,
DRIVE. .375H. .190D, .525L
Metal
rivet with center drive pin. Approximate measurements: Head 3/8'D,
body 3/16". pin 1/8", body length 17/32'.
Used
On: Universal application on many golf cars and industrial vehicles.
|
||
|
16038BOLT,
RAMP SHOE. YAM G9-G22
|
||
|
Allen-head
bolt. Threaded length approximately
1".
Used
On: Yamaha 4-cycle gas 92-UP {G9, G11.G14,
G16. G20, G21,G22).
|
||
|
16042BOLT,
CONNECTING ROD, YAM G2-G11
|
|||
 |
Oval-head
bolt.
Used
On: Yamaha 4-cycle gas 85-94 (G2, G8, G9rG11).
|
||
|
16064
|
BOLT,
CONNECTING ROD, YAM G16-G22
|
||
|
Flange-head
bolt.
Used
On: Yamaha 4-cycle gas 96-UP (G16, G20, G21, G22).
|
|||
|
16133 BOLT.
DRIVEN CLUTCH, EZ 89-UP
|
||
|
5/16-18
x 4" hex head bolt. Used with P/N's 15823 and 25632-G03 driven clutches.
Used
On: E-Z-Go gas 89-UP.
|
||
|
16134WASHER,
DRIVEN CLUTCH, EZ 89-UP
|
||||
 |
Steel
pilot washer with flange head. Approximate measurements: Flange
|
|||
|
:a
|
||||
|
head:
1.35" (34.3mm) O.D. x .15 (3.8mm|.
Shoulder: .85* (21.8mm) O.D. x .38"
(9.6mm) x .32' (8.1mm) I.O.
Used
On: E-Z-Go gas 89-UP.
|
||||
|
16154
|
NUT,
HEX, SLOTTED. 5/8"-18
|
||
 |
5/8-18
thread slotted hex nut for securing hub
to axle. If you need a bag of 20 order IMC
part number 15051.
Used
On: Columbia/Harley, gas and electric;
Cushman; E-Z-Go electric 76-UP and 2-cycle gas 78-93; Jacobsen;
Pargo.
|
||
|
16155COTTER
PIN, 1/8" x 1 1/2
|
||
|
1/8"
x 1-1/2* cotter pin. If you need a bag of 20 pieces, order P/N 10387-G1.
Used
On: Club Car gas and electric 74-UP; E-Z-Go gas and electric 76-94 (Marathon).
|
||
|
16190
|
BOLT,
DRIVE CLUTCH. YAM G16-G22
|
||
|
6mm
Allen-head bolt for weight link. (Three required per assembly.) Approximate
measurements: Overall length 2-1/2"; shaft length 2"' thread length
1/4'.
Used
On: Yamaha 4-cycle gas 96-UP (G16, G20, G21.G22}.
|
|||
|
16191NUT,
DRIVE CLUTCH BOLT, YAM G1S-G22
|
||
|
6mm
nyloc nut for use with drive clutch ^^
__bolt on weight link. (Three required
per
\^m assembly.)
Used
On: Yamaha 4-cycle gas 96-UP (G16,
G20, G21, G22).
 |
||
|
16623BOLT,
KNUCKLE ARM, YAM G2-G20
|
|||
 |
10mm
bolt for attaching steering arm to steering knuckle. Two required per side.
Used
On: Yamaha gas and electric 8502, (G2, G8, G9, G14, G16, G19, G20).
|
||
|
16624
|
BOLT,
LOWER A-ARM. YAM G2-G21
|
||
|
Flange-head
bolt. Measures approximately 2.9mm long.
Used
On: Yamaha gas and electric 8502 {G2. G8, G9. G14, G16, G19, G20, G21).
|
|||
|
16632NUT,
ROCKER ARM, YAM G16-G22
|
|||
 |
Nut
for rocker arm adjusting stud.
Used
On: Yamaha gas 96-UP (G16. G20, G21. G22).
|
||
|
1665WSCREW,
PHIL FLAT C/S, #6-32x1/4"
|
|||
 |
#6-32
x 1/4' Phillips flat screw. Used with P/N 36460-61.
Used
On: Columbia/Harley gas 63-81.
|
||
|
16982-G1WASHER.
THRUST, SPINDLE. EZ
|
|||
 |
Brass
washer. Measures approximately .89" (22.6mm) I.D. x 1.50" (38.1mm) O.D.
x .130" (3.3mm) thick.
Used
On: E-Z-Go gas and electric all years;
Jacobsen.
|
||
|
183WASHER,
FUT, #10
UM:S0
#10
zinc plated SAE flat washer.
|
||
|
18436-G1RIVET,
DRIVE (250)
|
||
|
Plastic
rivet with center drive pin. Approximate measurements: Head 5/8" D,
body 1/4" D, stem 5/32" D, body length 3/4".
|
||
|
18805-G1
|
BOLT,
HEAD, EZ 76-88 2-CYCLE
|
||
 |
Specialty
head bolt with 8mm male thread,
14mm hex head and 5/16-18 female
thread attaches cylinder head to the cylinder. For use with P/N 18806-G1 head
bolt washer.
Used
On: E-Z-Go 2-cycle gas 76-88.
|
||
|
18806-G1WASHER,
HEAD BOLT, EZ 80-88 2-CYCLE
|
|||
|
o
|
For
use with P/N 18805-G1 head bolt. Measures approximately .34" (8.6mm) I.D.
x .68" (17.4mm) 0.0. x .16' (4.1mm) thick.
Hole is countersunk on both sides.
Used
On: E-Z-Go 2-cycle gas 80-88.
|
||
|
20014-67STUD,
FAN HOUSING, CHD 67-95
|
||
|
Used
for attaching muffler to fan housing. Used
On: Columbia/Harley gas 67-95.
|
||
|
203RIVET,
DRIVE, BLACK, 1'
|
||
|
Plastic
rivet with center drive pin. Approximate measurements: Head 5/8" D,
body 1/4" D, stem 5/32" D, body length 1.00".
Color: Black
|
||
|
2072W SCREW,
PHIL PH, #S-32 x 3/8"
|
|||
 |
#6-32
x 3/8" Phillips countersunk screw. Used with P/N 36553-61 ball stop.
Used
On: Columbia/Harley gas 67-81.
|
||
|
210RIVET,
DRIVE, BLACK
|
||
|
Plastic
rivet with center drive pin. Approximate measurements: Head 5/8" D, body
1/4" Dr stem 5/32" D, body length 3/4". Color: Black
|
||
|
210WRIVET,
DRIVE, WHITE
|
||
|
Plastic
rivet with center drive pin. Color: White.
|
||
|
21809G1WASHER.
BRAKE, INNER, EZ G94-UP
|
|||
 |
Used
between axle shoulder and brake drum. Measures approximately 1.470" O.D.
x .834" I.D. x .127 thick.
Used
On: E-Z-Go 4-cycle gas 94-UP IMedalist/TXT).
|
||
|
21830G1WASHER,
BRAKE, OUTER, EZ G94UP
|
|||
 |
Used
between slotted nut and brake drum. Measures
approximately 1.312" O.D. x .979*
I.D. x .030" thick.
Used
On: E-Z-Go 4-cycle gas 94-UP (Medalist/TXT).
|
||
|
252N
|
NUT,
HEX, 6MM. YAM
|
||
 |
6mm
metric zinc plated steel nut for P/Ns 252,
253,15560,15561 battery hold-down rods.
Used
On: Hyundai gas and electric 91-UP; Yamaha
gas and electric 78-UP.
|
||
 |
|||
|
254
|
LUG
NUT, STEEL 12MM. YAM
12mm
metric zinc plated steel lug nut. Used
On: Hyundai; Yamaha gas and electric 78-UP (61, G2, G8, G9,
611, G14, G16, G19,G20,G21,G22).
|
||
|
27688-71 SCREW,
IDLE ADJUSTING. CHD 71-81
"T"
style adjusting screw used on Tillotsort carburetor. Approximately 2-5/16'
long.
Used
On: Columbia/Harley gas 71-81.
|
||
|
27716-61WASHER,
CARBURETOR, CHD. EZ
|
|||
|
o
|
Spring
tension washer for choke wire block
on Tillotson carburetor.
Used
On: Columbia/Harley gas 63-81; E-Z-Go
gas.
|
||
|
32988-68
CONTACT, F&R, CHD 68-81
|
|||
 |
Hex
head contact stud for forward and reverse switch. Solid copper with
5/16 -18 thread.
Used
On: Columbia/Harley gas 68-81.
|
||
|
T
|
||
|
339RIVET,
PUSH, BLACK (100)
|
||
|
Black
colored "push-in" type rivet made of ABS plastic for 1/4' hole size.
Approximate measurements: Head diameter 0.685"; stem diameter 0.2751;
stem length 0.820"; effective grip length 0.525".
|
||
|
T
|
||
|
3391RIVET,
PUSH, IVORY (100)
|
||
|
Ivory
colored "push-in" type rivet made of ABS plastic for 1/4" hole size. Color
matched to Yamaha ivory. Approximate measurements: Head diameter 0.685";
stem diameter 0.275"; stem length 0.620*; effective grip length 0.400".
|
||
|
348CCCONTACT,
SPEED SWITCH, EZ 65-UP
|
|||
 |
Solid
brass stud with 5/8" diameter round head,
13/16" long and 5/16-24 threads.
Used
On: E-Z-Go electric 65-UP (Resistor-type
systems only!}; Legend electric (Resistor-type
systems only!); Melex electric
(Resistor-type systems only!).
|
||
|
o
|
||
|
357WASHER,
LOCK. 3/8"
UM:SO
3/8"
split type, zinc plated steel lock washer.
|
||
|
41424-63WASHER,
SPRING, CHO 63-85
|
|||
 |
Tension
washers for brake assembly and floor
mounted forward and reverse switch.
Used
On: Columbia/Harley gas and electric 63-85.
|
||
|
41841-63RIVET,
BRAKE. 9/64D X 1/2L
|
|||
|
T
|
Brass,
flat-head rivet, 9/64" diameter x 1/2" length.
Used
On: Columbia/Harley, all models using 41810-64A brake linings. Eight
required per car.
|
||
|
426WASHER,
THRUST, YAM G1
|
|||
|
o
|
Aluminum
thrust washer for use with connecting rod assembly. (Two required per
assembly.)
Used
On: Yamaha 2-cycle gas 78-89 (Gi).
|
||
 |
||
|
43152-66LUG
NUT. STEEL 1/2"-20, CC, EZ
1/2-20
thread zinc plated steel lug nut. Used On: Club Car gas and electric
76-UP; Columbia/Harley; Cushman; E-Z-Go; Jacobsen; Melex; Nordskog; Pargo;
Taylor Dunn.
|
||
|
o
|
||
|
451WASHER.
LOCK, 1/4"
UM
50
1/4"
split type, zinc plated steel lock washer.
|
||
|
455
|
SCREW.
CRANKCASE, YAM G1
|
||
|
Pan
head, Phillips drive (45mm long). Used
On: Yamaha 2-cycle gas 78-89 (G1).
|
|||
|
456
|
SCREW,
CRANKCASE, YAM G1
|
||
|
Pan
head, Phillips drive (60mm long). Used
On: Yamaha 2-cycle gas 78-89 (G1).
|
|||
|
457
|
SCREW,
CRANKCASE, YAM G1
|
||
|
Pan
head, Phillips drive (65mm long). Used On: Yamaha 2-cycle gas 78-89
(G1).
|
|||
|
497CLEVIS
PIN, 5/16" x 1"
|
|||
 |
UM
20
Plated
pin with drilled hole for cotter pin. Uses P/N 10387-G1 cotter pin {NOT included).
Used
On: Club Car gas and electric 81-UP <DS);
Columbia/Harley gas and electric 86-UP;
Davis; E-Z-Go gas and electric 65-UP; Jacobsen; Karrior; Legend;
Melex; Nordskog; Pargo; Taylor
Dunn.
|
||
 |
|||
|
51401-G1
|
NUT,
HEX, BRASS, 5/16"-18 5/16-18 thread brass nut.
|
||
|
6242WWASHER,
FLAT, 1/4"
UM
SO
1/4"
steel flat washer.
|
||
|
70327-G01BOLT,
SPINDLE, E2 94-00 MED/TXT
|
||
|
1/2-13
x 5-1/2" long bolt fastens the front spindle to the front axle weldment.
Used with P/N's 70267-G01 and 70267-G02 spindles. Uses P/N 14390-G6 locknut.
Used
On: E-Z-Go 4-cycle gas and electric 94-00
(Medalist/TXT).
|
||
|
o
|
||
|
7041WASHER.
LOCK, 5/16"
UM:50
5/16"
split type, zinc plated steel lock washer.
|
||
 |
|||
|
706
|
NUT.
HEX. 3/8M6
3/8-16
thread zinc plated steel nut.
|
||
|
71742-75CONTACT,
CHD, DE-40
|
|||
 |
Round
head contact stud for speed switch
contact plate assembly. Solid copper, square shoulder with 5/16 -24
thread. Overall length approximately 1-1/8".
Used
On: Columbia/Harley electric 76-78 (DE-40).
|
||
 |
|||
|
7473
|
NUT.
LOCK, 5/16--18
|
||
 |
|||
|
7676
|
NUT.
HEX, 1/4--28
1/4-28
thread zinc plated steel nut for P/N 66453-66 battery rod.
|
||
 |
|||
|
7704
|
NUT,
LOCK, 1/4"-28. CHD 63-81
1/4-28
nylon lock nut for primary clutch.
|
||
 |
|||
|
7893
|
NUT,
LOCK, #10-32
#10-32
thread nylon insert hex lock nut.
|
||
 |
|||
|
7988
|
NUT,
JAM, 5/8"-18. CHD
5/8-18
thread zinc plated jam nut for oil bath
clutch.
|
||
|
8119WNUT,
WING 1/4"-20, CHD 68-83
|
|||
 |
Zinc
plated 1/4-20 wing nut for metal air filter canister. Used with P/N's 29046-71
and 29046-72 air cleaner stud.
Used
On: Columbia/Harley gas 68-83.
|
||
 |
||
|
83259-75NUT,
JAM, BRASS, 1/4"-20
1/4-20
thread brass nut.
|
||
|
947SCREW,
W/S RETAINER PART#901
Hex
head sheet metal screw with serrated shoulder for use with P/N 901
bolt-on windshield retainer.
Used
On: Hinged windshields.
|
||
|
9993HOSE
CLAMP. SCREW, 5/16"
|
||
|
Screw-type
clamp made for use on 5/16"
|
||
|
Used
On: Club Car; Columbia/Harley gas 63-UP; E-Z-Go; Jacobsen.
|
||
|
9995
|
HOSE
CLAMR SCREW, 2"
|
||
 |
Screw-type
clamp made for use on 2* hose.
For Columbia/Harley, clamp fastens rubber air intake hose between
carburetor and air cleaner.
Used
On: Columbia/Harley gas 63-87; Cushman;
E-Z-Go; Yamaha.
|
||