List of parts for Harley Davidson/Columbia golf carts

BRUSH HOLDER, CC 84-93

Insulated brush holder with tension springs.

Used On: Club Car electric. 84-93 (2.5 HP, 10 spline motor); Columbia/Harley; E-Z-Go electric, 80-92; Legend.

83284-86

1011401BEARING SET, CC, CHD, EZ

SET

^Ba" ^bearin9^s ⁱⁿ ^a plastic cage assembly

•**

(2), steel races (2), and a tapered steel

•*** washer. Races measure approximately *<»•* .875" (22.22mm> I.D. x 1.528" (38.81mm) O.D.x.272"(6.90mm>W.

Used On: Club Car electric, 76-83; Columbia/Harley; Cushman; E-Z-Go; Taylor Dunn.

1011420BRUSH SPRING, CC, CHD, YAM

Brush tension spring.

Used On: Club Car electric, 80-84; Columbia/Harley electric, 76-81; Yamaha electric, 79-91. Hitachi electric motors only.

82919-79

1012466GASKET, STEERING TUBE. CC, CHD, EZ

Die-cut foam gasket. Measures approximately 3/4" I.D. x 1-3/8" O.D. x 7/16" W.

Used On: Club Car gas and electric, 76-94; Columbia/Harley; Cushman; Davis; E-Z-Go gas and electric, 65-70; Jacobsen; Legend; Noland; Otis; Toro.

57070-68

1013010FIELD COIL GEN. CC, CHD. EZ

Field coil assembly for Hitachi-style starter generators.

Used On: Club Car gas, 84-96; Columbia/ Harley 2-cycle gas, 69-95; E-Z-Go 2-cycle gas, 80-94 (Marathon).

30210-77

1013011BRUSH HOLDER. GEN., CC 84-96

Includes brushes, springs and wires. For Hitachi starter-generators only.

Used On: Club Car gas, 84-96; Columbia/Harley gas, 67-97; E-Z-Go gas, 80-93; Hyundai gas, 91-UP; Yamaha gas, 78-95(01,02,08,09.011,0141.

30351-77

1016111SPARK PLUG, BP5ES,{4,120)

NGK BP5ES.

Used On: Club Car gas FE290, 92-99; Columbia/Harley gas, 71-81; Jacobsen.

32309-6932309-69A

FLASHER, 12 VOLT, CC 93-UP•.

Three-prong flasher unit.

Used On: Universal application where 12-volt turn signal switch is used.

1017947INSULATOR KIT. CC, CHD, EZ, YAM

Includes two injection molded insulators with dual hex-head holes, two oval fiber insulators with dual .525" I.O holes and

^hardware-

Used On: Club Car electric. 94-UP; Columbia/Harley electric (new style GE motors); E-Z-Go electric (new style GE motors); Yamaha electric, 90-UP (G8, G9, G14, G16).

11025RETAINING RING, CHD 63-81

Used with right crankcase bearing. Us«d On; Columbta/Hdrley gas, 63-81.

11026RETAINING RING, CHD 63-81

Made of hi-tensile steel.

Used On: Columbia/Harley gas, 63-81.

11050RETAINING RING, CHD 68-81

Made of hi-tensite steel.

Used On: Columbia/Hartey gas, 68*81.

11054RETAINER, REAR FLANGE. CHO 71-81

Precision stamped retainers. (2 required per flange assembly).

Used On: Columbia/Harley gas, 71-81.

Tips: This retainer must be installed with the sharp edges facing out. Failure to do so may allow the retainer to work loose, causing the 36429-59A spring retainer to fly off of the 36410-71A or 71B flange hub. THIS COULD CAUSE EXTREME PHYSICAL INJURY!

11108

0 RING. PRIMARY CLUTCH, CHD 63-81

Installs in P/N 36446-61 O-ring retainer. Used On: Columbia/Harley gas, 63-81.

11109

0 RING, FLANGE COVER, CHD 63-81

Installs in outer groove of P/N 36449-61 front floating flange assembly.

Used On: Columbia/Harley gas, 63-81.

11117 0 RING, CRANKSHAFT, CHD 63-81

Installs on crankshaft, transmission side. Used On: Columbia/Harley gas, 63-81.

11206KEY, DRIVE FLANGE, CHD 67-81

Woodruff key. Measures approximately 3/16" x 5/8".

Used On: Columbia/Harley gas, 67-81.

11878-G1RESISTOR, LEAD, CHD, EZ 70-85

Stamped steel, zinc plated spacer lead with two drilled 5/16" holes. Measures approximately 1/2" W x 1-3/8" L x 5/8" thick.

Used On: Columbia/Harley electric, 76-82, DE-40 and MG-IV models; E-Z-Go electric, 70-85; Melex electric, 65-85.

71759-75

12015AOIL SEAL. CRANKCASE, CHD 67-81

Seal measures approximately .97" (24.6mm) I.D. x 1.87' (47.6mm) O.D. x .24" (6.2mm) W. Uses two per car.

Used On: Columbia/Harley gas crank-case clutch and flywheel side, 67-81.

12101

12027OIL SEAL, CAM, CHD 67-81

Seal measures approximately .80" (20.3mm) I.D. x 1.25" (31.8mm> O.D. x .18' • {4.7mm} W.

Used On: Columbia/Harley gas, 67-81.

12046OIL SEAL, FAN SIDE, CHD 82-95

Seal measures approximately 1.32" (33.7mm) I.D. x 2.13" (54.1mm) O.D. x .314" (7.9mm) W.

Used On: Columbia/Harley 2-cycle gas crankcase flywheel side, 82-95.

12046A

12098OIL SEAL, CLUTCH SIDE, CHD 82-95

Seal measures approximately .93" (23.6mm) I.D. x 2.052 (52.1mm) O.D. x .37'<9.3mm)W.

Used On: Columbia/Harley 2-cycle gas crankcase clutch side, 82-95.

12098B

12305-G1 RETAINING RING, CC, CHD, EZ

Push type zinc plated clip for retaining brake cables.

Used On: Club Car gas and electric, 81-UP; Columbia/Harley gas and electric, 86-UP; Cushman; E-Z-Go gas and electric, 68-UP; Legend;Jacobsen.

11035

13164-G1CIRCUIT BREAKER, 12V-50A

Self-resetting circuit breaker with stud type terminals. 12-volt, 50-amps.

Used On: Club Car/Lester battery chargers; Columbia/Harley; E-Z-Go battery chargers.

66058-65

13414-G1SCREW, CHOKE DISC, CHD, EZ

Screw for choke disc on Tlllotson carbu-retor. Used with P/N 27674-66 choke disc

Used On: Columbia/Harley gas 63-81; E-Z-Go 2-cycle gas 75 and earlier.

13427-G1CHOKE SCREW, CHD,E2

Used to fasten choke wire to Tillotson carburetor.

Used On: ColumbiayHarley gas, 63-81; E-Z-Go 2-cycle gas, 75 and earlier.

2589

14608-G1REVERSE BUZZER, CC. CHD, EZ

24/36-volt heavy-duty warning buzzer. (Not the same configuration as OEM buzzer).

Used On: Club Car electric, early 70-UP; Columbia/Harley; Cushman; E-Z-Go electric, 65-83, Legend; Melex; Noland.

15036SOLENOID, 36V-6T, COPPER/LONG

36-volts, 6-terminals, copper contacts with

long metal housing. o © o • o oUsed On: Columbia/Harley electric, 87-UP.

O O71-32022471-320224-2B1

71-320224-5B1

15051

NUT, HEX SLOTTED, 5/8-18

5/8-18 thread slotted hex nut for securing hub to axle.

Used On: Columbia/Harley, gas and electric; Cushman; E-Z-Go electric, 76-UP and 2-cycle gas, 78-93; Jacobsen; Pargo.

82713-78

83131-63

15113-G1SNAP RING, CHD. EZ

Snap ring for retaining axle bearing.

Used On: Columbia/Harley gas and electric. 78-UP; E-Z-Go 2-cycle gas. 78-93; E-ZGo electric. 78-UP; Melex.

15194CONTROLLER, 36-48V, 350A, W/D

36/48-volt, 350-amp solid-state electronic speed controller. Equipped with "disable" feature which helps prevent the rear wheels from spinning during rapid acceleration.

Used On: Club Car; Columbia/Harley; Cushman; E-Z-Go; Many industrial vehicles.

15195CONTROLLER, 36-48V, 450A, W/D

36/48-volt 450-amp solid-state electronic speed controller. Equipped with "disable" feature which helps prevent the rear wheels from spinning during rapid acceleration.

Used On: Club Car; Columbia/Harley; Cushman; E-2-Go; Many industrial vehicles.

15196FIELD COIL REPAIR STUD

Copper threaded contact with square shoulder. 5/16-18x1-1/2".

Used On: Columbia/Harley electric (GE motors); E-Z-Go electric, 70-92 (GE motors).

15197SPUNE BUMPER, GE MOTOR

Neoprene spline bumper. Measures approximately .77* (19.5mm) O.D. x .35" (8.8mm) thick.

Used On: Columbia/Harley electric (new style GE motors); E-Z-Go electric, 89-UP (GE and Advance motors); Yamaha electric, 90-UP (GE motors).

11423

15199

CONTROLLER, 24-36V, 400A,W/D

24/36-volt, 400-amp adjustable solid-state electronic speed controller. Equipped with ."disable" feature which helps prevent the rear wheels from spinning during rapid acceleration.

Used On: Club Car; Columbia/Harley; E-Z-Go; Many industrial vehicles.

15200FOOT SWITCH, CURTIS FP2

Eliminates adapting existing throttle pedal to work with pot box.

Used On: Universal assembly for use with electronic speed controllers.

NEW_______

Solid state electronic speed controllers.

(W/D) Equipped with "disable" feature which helps prevent the rear wheels from spinning during rapid acceleration.

(WO/D) Not equipped with "disable" feature.

P/N 24-36V, 400A, W/D15255

OEM 73060-G01 CURTIS 1205-117

15374WIRING KIT FOR 4 LIGHTS

KIT

Kit includes one 30-amp relay, one snap-lock connector, one illuminated 3-terminal rocker switch. Mounting hardware includes the following wire:<1) 43ⁿ black ''' with fuse holder, <1) 43" red wire. {1) 40"

blue, {1} 40" green, and (2) 9-1/2" white.

Used On: Universal use for light kit/ installations.

15421CONTROLLER, 36-48V. 450A. WO/D

36/48-volt, 450-amp solid-state electronic speed controller. NOT equipped with the "disable" feature. (Disable feature helps prevent the rear wheels from spinning during rapid acceleration.)

Used On: Club Car; Columbia/Harley; Cushman; E-Z-Go; Many industrial vehicles.

15422CONTROLLER. 36-48V, 550A,W/D

36/48-volt, 550-amp solid-state electronic; speed controller. Equipped with "disable" feature which helps prevent the rear wheels from spinning during rapid acceleration.

Used On: Club Car; Columbia/Harley; Cushman; E-Z-Go; Many industrial vehicles.

15423CONTROLLER, 36-48V,550A, WO/D

36/48-volt, 550-amp solid-state electronic speed controller. NOT equipped with the "disable" feature. (Disable feature helps prevent the rear wheels from spinning during rapid acceleration.)

Used On: Club Car; Columbia/Harley; Cushman; E-Z-Go; Many industrial vehicles.

15426

POTENTIOMETER, CURTIS 98191

Used with Curtis pot box.

Used On: Club Car; Columbia/Harley; Cushman; E-Z-Go electric, 89-94 (Marathon); Melex.

74814-97 98191

15436-G1 BUSHING, INSULATED, .335 X .345

Square plastic insulator bushing. Measures approximately .33" (8.3mm) I.D. x .55" (13.9mm> O.D. x .34' <8.6mm| thick.

Used On: Columbia/Harley electric; Cushman; Davis; E-Z-Go electric, 70-92; Legend; Noland; Nordskog; Pargo (GE motors).

82836-8683262-75

15528 SPARK PLUG, BP6HS (4,120)

NGK BP6HS.

Used On: Columbia/Harley gas, 69-81; Yamaha 2-cycle gas (G1).

15575 BEARING, 6304LL

Ball bearing, sealed both sides. Measures approximately .79" {20mm) I.D. x 2.05" (51.9mm) O.D. x .59" (14.9mm> W.

Used On: Columbia/Harley gas; Cushman gas; EZ-Go gas; Melex gas; Taylor Dunn.

15601SOLENOID, 12V-4T, SILVER/LONG

12-volts, 4-terminals, silver contacts with

. long metal housing.

Used On: Columbia/Harley gas; E-Z-Go O o gas, 79-94 (Marathon).

O o 71-111221 7M11221-2B1

71-111221-5B1

15706GASKET SET, HEAD & BASE, CHD 63-95

Set includes: P/N 16784-82 gasket, head and P/N 16780-63 gasket, cylinder base.

Used On: Columbia/Harley gas, 63-95.

15706GASKET SET, HEAD & BASE, CHD 63-95

Set includes: P/N 16784-82 gasket, head and P/N 16780-63 gasket, cylinder base.

Used On: Columbia/Harley gas, 63-95.

15755CLUTCH, PRIMARY, CHD 96-UP

Variable speed primary drive unit, calibrated to provide quiet, efficient, sensitive and smooth operation at all speeds.

Used On: Columbia/Harley 9hp 4-cycle gas, 96-UP.

36578-96 36578-96A 36578-96B

15756

CLUTCH, SECONDARY, CHD 92-95

Die cast unit, machined and balanced.

Used On: Columbia/Hariey 2-cycle gas, 92-95.

33245-92

CLUTCH, SECONDARY, CHD 96-UP

Die cast unit, machined and balanced.

Used On: Columbia/Harley 9hp 4-cycle gas, 96-UR

33245-96

15758KEY SWITCH, CHD G75-81, E76-89

Switch includes P/N 71766-82 keys (2). double spade tab connector and installation instructions.

Usod On: Columbia/Harloy 2-cycle gas, 75-81. electric 76-89.

71762-75 71762-75A

15759KEY SWITCH, CHD G96-UP

Switch includes P/N 15808 keys (2).

Used On: ColumbiayHarley 4-cycle gas, 96-UP.

71762-96

15756CLUTCH, SECONDARY, CHD 92-95

Die cast unit, machined and balanced.

Used On; ColumbiayHariey 2-cycle gas, 92-95.

33245-92

15793

BELT, DRIVE, CHD 96-UP (10)

Reinforced belt. Measures approximately 1-3/16" Wx 47-1/2" O.D.

Used On: Columbia/Harley 4-cycle gas, 96-UP.

36395-97

39398-97

15794

BELT. GENERATOR. CHD 96-UP

Reinforced belt. Measures approximately 7/16* W x 30-5/8* O.D.

Used On: Columbia/Harley 4-cyclo gas, 96-UP.

36389-96

15808KEY, CHD 96-UP

Fits P/N 15759 ignition switch.

Used On: Coiumbia/Harley 4-cycle gas, 96-UP.

71766-96

15811REVERSE BUZZER, CC, CHD, EZ

9/36-volt buzzer in black plastic housing with two male spade connectors. Mount tab has two 5/32" holes, approximately 2" between centers.

Used On: Club Car electric, early 70-UP; ColumbiayHarley; Cushman; E-Z-Go electric, 65-UP; Legend; Melex; Noland.

71409-90

15821SHOCK, FRONT & REAR, CHD 89-UP

Molded rubber bushing with sleeve mount both ends. Compresses to 1V; extends to 15-7/16", measured end to end.

Used On: Columbia/Harley gas and electric, 89-UP.

54514-89

15916

Solid state electronic speed controllers.

(W/D) Equipped with "disable* feature which helps prevent the rear wheels from spinning during rapid acceleration.

(WO/D) Not equipped with "disable" feature. 36-48V, 350A,W/D

REBUILT 2 Year Warranty

15922

Solid state electronic speed controllers.

(W/D) Equipped with "disable" feature which helps prevent the rear wheels from spinning during rapid acceleration.

(WO/D) Not equipped with "disable' feature. 36-48V,450A.WO/D

REBUILT 2 far Warranty

15930

FILTER,AIR,CC,CHD,EZ(50)

Layered paper-type element with an inner and outer wire mesh encasement, and sealed end caps. Measures approximately 6-1/4" H x 4-1/4" O.D.

Used On: Club Car gas, 84-91; Columbia/ Harley 2-cycle gas, 68-95; E-Z-Go 2-cycle gas, 76-94 (Marathon).

29131-71 29131-88

^^^^Ji^J^

15953CARBURETOR, CHD 96-UP

Float bowl styled Mikuni carburetor with dual neoprene tubes.

__ ^. >C Used On: Columbia/Harley 4-cycle gas, O O O _g6._UR

27158-96

TUNE UP KIT, CHD 71-81

Includes 1 each of P/N 15930 air filter, P/N 62350-63 fuel filter, P/N 32726-30A condensor with bracket, P/N 32661-70 point set and P/N 1016111 spark plug.

Used On: Columbia/Harley 2-cycle gas, 71-81.

16015TUNE UP KIT, CHD 82-95

Includes 1 each of P/N 15930 air filter, P/N 62350-63 fuel filter, P/N 17432-G1 oil and gas filter, P/N 32726-30A condensor with bracke, P/N 32661-70 point set and P/N 346 spark plug.

Used On: ColumbiayHarley 2-cycle gas, 82-95.

SPRING, BRAKE SHOE, CC, CHD, EZ, YA

"U-shaped" spring steel retainer for brake Shoes. NOT FOR USE ON BENDIX BRAKE SYSTEM.

Used On: Club Car gas and electric, 81-UP; Columbia/Harley gas and electric, 86-94; E-Z-Go gas and electric, 81-96; Yamaha gas and electric, 78-91 (G1, G2, G8, G9).

41817-86

DUST COVER, BRAKE, CC, CHD, E2, YAM

Molded neoprene cover for brake actuator. NOT FOR USE ON BENDIX BRAKE SYSTEM.

Used On: Club Car gas and electric, 81-UP; ColumbiaVHarley gas and electric, 86-94; E-Z-Go gas and electric, 81-96; Yamaha gas and electric, 78-91IG1, G2, G8, G9).

17293-G1

16150-78REBUILD KIT. CHD 71-81

^ Includes cylinder and piston assembl o crankcase gaskets, 6-spline cranksha Zi assembly, all bearings and seals.

Used On: Columbia/Harley gas, 71-81.

16228-67MOTOR MOUNT, CHD, EZ

Rubber engine vibration mount with metal plate and four mount holes.

Used On: Columbia/Harley gas, 67-81; E-Z-Go 2-cycle gas, 76-94 (Marathon); Jacobsen.

16380CLUTCH. SECONDARY. CHD 96-98

Die cast unit, machined and balanced for mounting on 19-splined input shaft.

Used On: Columbia/Harley 4-cycle gas, 96-98 (with splined input shaft).

33245-96

16524-67 1/2CYUNDER ONLY, CHD 67-81

Machined cast iron cylinder.

Used On: Columbia/Harley gas, 67-81.

I I

CYLINDER ASSEMBLY, CHO 63-81

Machined cast iron cylinder. Includes matching piston, wrist pin, ring set, and retainers.

Used On: Columbia/Harley gas, 63-81

Tips: Before installation, cylinder assemblies should always be washed thoroughly in warm, soapy water and then rinsed completely to insure that all traces of honing oil and grit have been removed. Consult the manufacturer's maintenance manual for complete installation instructions.

16524-67B 16524-67C

16524-82 1/2CYLINDER ONLY, CHD 82-95

Machined cast iron cylinder.

Used On: Columbia/Harley 2-cycle gas, 82-95.

I I

16524-82CYUNDER ASSEMBLY, CHD 82-95

Machined cast iron cylinder. Includes matching piston, wrist pin, ring set, and retainers.

Used On: Columbia/Harley 2-cycle gas, 82-95.

16500-82

1665WSCREW, #6-32X1/4", PHIL, FLAT, C/S

#6-32 x 1/4" Phillips flat screw. For Columbia/Harley, screw fastens slide strips in front floating flange. (6 per car)

Used On: Columbia/Harley gas, 63-81.

16780-63

GASKET, CYLINDER BASE, CHD 63-95

Die-cut gasket.

Used On: Columbia/Harley 2-cycle gas, 63-95.

16780-63A

16780-63GASKET, CYLINDER BASE, CHD 63-95

Die-cut gasket.

Used On: ColumbiafHarley 2-cycle gas, 63-95.

16780-63A

16784-82

GASKET, HEAD, CHD 63-95

Die cut aluminum gasket.

Used On: Coiumbia/Harley 2-cycle gas, 63-95.

16917-G1BRUSH SET, MOTOR, CC, CHD, EZ, HYU

Set of 4 brushes {with studs) for GE motors. Measures approximately 1-7/16* L x 5/8" W, 1/2' thick.

Used On: Club Car electric. 80-93; Columbia/Harley electric, 86-90; Cushman electric; E-Z-Go electric, 80-92; Hyundai electric; Legend; Nordskog; Taylor Dunn.

83283-86

16920-G1BUCKLE, BAG STRAP, CHD, EZ

Made of black high impact nylon.

Used On: Columbia/Harley 84-UP; E-Z-Go 76-94 (Marathon); Legend.

53472-84

17290-G1 SPRING, BRAKE SHOE, CC, EZ, YAM

17-coil spring. Measures approximately 3-3/4" long.

Used On: Club Car gas and electric, 80-UP; Columbia/Harley, gas and electric, 86-UP; E-Z-Go gas and electric, 87-1/2-96; Hyundai gas and electric, 90-UP; Jacobsen; Legend electric; Yamaha gas and electric, 79-92 (G1.G2,G8,G9).

41816-86

17429-G1BRAKE SHOES, CC, CHD, EZ. YAM

Bonded lining measures 1-3/16* W x 6" L

Used On: Club Car gas and electric, 81-94; Columbia/Harley gas and electric, 86-89; E-2-Go gas and electric, 82-86 1/2; Legend; Yamaha 2-cycle gas and electric, 78-81 <G

41819-8641819-86A

17432-G1FILTER, OIL & FUEL, CHD, EZ 76-94

In-line 'arrow" style clear plastic filter for use with 1/4" fuel line.

Used On: Columbia/Harley gas, most years; E-Z-Go 2-cycle gas, 71-94 (Marathon).

62489-85

18258-G2BATTERY HOLD DOWN, CHD, EZ

Steel, zinc plated hold-down. Straddles top of battery. Measures approximately 8-1/4" long (for 6" battery).

Used On: Columbia/Harley; E-Z-Go 4-cycle gas, 91-94 and 2-cycle gas, 83-85 and 90-1/2-93 (Marathon); Jacobsen.

66388-64

18290-G1RESISTOR BOARD, EZ 70-85

Insulator board with six drilled 1/4" holes. Measures approximately 1-7/8" W x 5-1/4" L x 1/4" thick.

Used On: Columbia/Harley; E-Z-Go electric, 70-85; Melex.

71758-75

18325-G1STEERING WHEEL, CHD, E2

Measures approximately 13-3/4' D. Used with P/N 57098-84A guide collar.

Used On: Columbia/Harley gas and electric, 84-UP; E-Z-Go gas and electric, 83-99.

57085-82 57085-84 57085-84B

19186-G1

BRAKE DRUM, THIN, EZ (6)

Machined cast iron drum with 6.25" I.D. inner surface. For use with 24-spline axle shaft. Includes 1/2-20 studs, 4 on 4 pattern.

Used On: Columbia/Harley; E-Z-Go 2-cycle gas, 82-UP; E-Z-Go electric, 82-96 and 99-UP (including Medalist/TXT); Hyundai gas and electric, 91-UP; Melex.

41844-96

19913-G1BATTERY HOLD DOWN, CHD, E2

Steel, zinc plated hold-down. Straddles top

_M_______JL. of battery. Measures approximately 8-1/4"

long (for 5" battery).

Used On: Columbia/Harley; E-2-Go gas. 86-

90.

66462-66A

20014-67 STUD, FAN HOUSING, CHD 67-95

Used for attaching muffler to fan housing. Used On: Columbia/Harley gas, 67-95.

22007-63

PISTON ASSEMBLY, .050, CHD 63-95

Made of high quality aluminum alloy precision machined to OEM specifications. Includes rings, piston pin and keepers.

Used On: Columbia / Harley 2-cyclc gas, 63-95.

203RIVET. DRIVE. BLACK. 1"

Plastic rivet with center drive pin. Color: Black

Used On: Miscellaneous uses on a variety of golf cars.

20468-G1SOLENOID, 36V-4T, SILVER

36-volts, 4-terminals, silver contacts with phenolic housing.

Used On: Club Car electric industrial vehicles, 88-UP; Columbia/Harley electric, 87-UP; E-Z-Go electric, 89-UP; Jacobsen; Melex with electronic speed control; Taylor Dunn; Yamaha electric, 90-UP (G8, G9, G11,G14, G16).

586-117111586-117111-2B1

586-117111-5B171458-87

206

HEADLIGHT, 12V HALOGEN (20)

High-impact housing and plastic stone guard. Clear lens, with 12volt-55w bulb. Approximate dimensions: 6" (152.4mm) W x 3-1/2" <88.9mm> H x 4" (101.6mm) D.

Used On: Universal applications on many golf cars.

2072WSCREW. #6-32 X 3/8", PHIL PAN

#6-32 x 3/8" Phillips countersunk screw. Ball stop screw for front floating flange.

Used On: Columbia/Harley gas, 67-81.

210

RIVET, DRIVE, BLACK

Plastic rivet with center drive pin. Color: Black

Used On: Miscellaneous uses on a variety of golf cars.

RIVET, DRIVE, WHITE

Plastic rivet with center drive pin. Color: White

Used On: Miscellaneous uses on a variety of golf cars.

212A

LIGHT, 12V, AMBER

Mounts with rivets or screws (nott included) on 2" centers. Has two wires, 12-volt single element #1895 bulb and measures approximately 2-1/4" (57.15mm) H x 4-11/16" (119.06mm) L x 9/16" (14.28mm) thick. D.O.T. -APPROVED LENS!._;

Used On: Adaptable for use on many golf cars, trailers, utility vehicles, etc.

212RLIGHT, 12V, RED

Mounts with rivets or screws (not included) on 2" centers. Has two wires, 12-volt single element #1895 bulb and measures approximately 2-1/4" {57.15mm) H x 4-11/16" {119.06mm} L x 9/16" (14.28mm) thick. D.O.T. -APPROVED LENS!

Used On: Adaptable for use on many golf cars, trailers, utility vehicles, etc.

21764-G1RESISTOR. CC, CHD. EZ

__ _—250-ohm solenoid resistor with two crimp-

6on eyelet terminals for speed controller

X equipped cars. (Except DCS)

Used On: Club Car; Columbia/Harley; E-Z-Go electric, 89-UP.

70592-87

21807-G1BRAKE DRUM, CHD, EZ

Hub drum assembly with 1" fine tooth spline.

Used On: Columbia/Harley 4-cycle gas, 95-UP; E-Z-Go 4-cycle gas, 91-UP and electric, 97-98.

41843-94

22001-63

PISTON ASSEMBLY. STD, CHD 63-95

Aluminum alloy. Includes rings, piston pin and retainers.

Used On: Columbia/Harley 2-cycle gas, 63-95.

Tips: Before installing rings on piston, always check to insure that you have the proper end-gap clearance when rings are inserted in cylinder. Consult the manufacturer's maintenance manual for proper specifications and complete installation instructions.

22001-82

t i

22003-63PISTON ASSEMBLY, .010, CHO 63-95

Aluminum alloy. Includes rings, piston pin and retainers.

Used On: Columbia/Harley 2-cycie gas, 63-95.

22003-82

t i

22004-63 PISTON ASSEMBLY, .020.CHD 63-95

Aluminum alloy. Includes rings, piston pin and retainers.

Used On: Columbia/Harley 2-cycie gas, 63-95.

22004-82

t i

22005-63PISTON ASSEMBLY, .030,CHD 63-95

Aluminum alloy. Includes rings, piston pin and retainers.

Used On: Columbia/Harley 2-cycie gas, 63-95.

22005-82

t i

22006-63PISTON ASSEMBLY, .040,CHD 63-95

Aluminum alloy. Includes rings, piston pin and retainers.

Used On: Columbia/Harley 2-cycie gas, 63-95.

22006-82

22007-63

PISTON ASSEMBLY, .050,CHD 63-95

Aluminum alloy. Includes rings, piston pin and retainers.

Used On: Columbia/Harley 2-cycie gas, 63-95.

22008-63

PISTON ASSEMBLY, .060,CHD 63-95

Aluminum alloy. Includes rings, piston pin and retainers.

Used On: Columbia/Harley 2-cycie gas, 63-95.

22009-63

PISTON ASSEMBLY. 070,CHD 63-95

Aluminum alloy. Includes rings, piston pin and retainers.

Used On: Columbia/Harley 2-cycie gas, 63-95.

22325-63

RING SEX STD, CHD 63-95

Three ring set.

Used On: Columbia/Hartey 2-cycle gas, 63-

95.-?..... - -??'

Tips: Before installing rings on piston, always check to insure that you nave the proper end-gap clearance when rings are inserted in cylinder. Consult the manufacturer's maintenance manual for proper specifications and complete installation instructions.

22325-84 22445-63

22327 63

RING SET, .010, CHD 63-95

Three ring set.

Used On; Columbia/Harley 2-cycle gas, 63-

95.-•..... ~

Tips: Before installing rings on piston, always check to insure that you have the proper end-gap clearance when rings are inserted in cylinder. Consult the manufacturer's maintenance manual for proper specifications and complete installation instructions.

22327-82

22447-63

22328-63

RING SET, .020, CHD 63-95

Three ring set.

Used On; Columbia/Harley 2-cycle gas, 63-

95.-•..... -?

22328-82 22448-63

22329-63

RING SET, .030, CHD 63-95

Three ring set.

Used On; Columbia/Harley 2-cycle gas, 63-

95.-•..... -?

Tips: Before installing rings on piston, always check to insure that you have the proper end-gap clearance when rings are inserted in cylinder. Consult the manufacturer's maintenance manual for proper specifications and complete installation instructions.

22329-82 22449-63

22330 63

RING SET, .040, CHD 63-95

Three ring set.

Used On; Columbia/Harley 2-cycle gas, 63-

95.-•..... ~

22330-82

22450-63

22331 -63

RING SET, 050. CHD 63-95

Three ring set.

Used On; Columbia/Harley 2-cycle gas, 63-

95.-•..... -?

22333-63

RING SET, .070, CHD 63-95

Three ring set.

Used On; Columbia/Harley 2-cycle gas, 63-

95.-•..... ~

22333-63

RING SET, .070, CHD 63-95

Three ring set.

Used On: Columbia / Harley 2-cycle gas, 63-95.

22587-63A PISTON PIN, CHD 63-95

Made of high temperature steel, precision machined.

Used On: Columbia/Harley gas, 63-95.

22587-63APISTON PIN, CHD 63-95

Made of high temperature steel. Used On: Columbia/Harley gas, 63-95.

230BAG STRAP. CHD, EZ, YAM

Black nylon weave strap. Measures approximately 2" W x 65" L.

Used On: Columbia/Harley gas and electric, 84-00; E-Z-Go gas and electric, 76-94 (Marathon); Legend; Melex; Yamaha gas and electric, 78-95 (G1, G2, G9, G14); Universal application for many golf cars.

53473-84

23703-71C

CRANKSHAFT, CHD 71-81

Balanced crankshaft assembly. Used On: ColumbiayHarley gas, 71-81. 23703-79

23732-64B

SLEEVE, PRIMARY CLUTCH, CHD 64-81

Ground sleeve with machined groove for felt seal.

Used On: ColumbiayHarley gas, 64-81.

23742-61

WASHER, LOCKJRANS, CHD 63-70

Two-tab lock washer for use on 9-spline crankshaft.

Used On: Columbia/Harley gas, 63-70.

23747-71B

WASHER, LOCK, TRANS, CHD 71-81

Four-tab lock washer for use on 6-spline crankshaft.

Used On: Columbia/Harley gas, 71-81.

23962-63A

CRANKPIN, CHD 2-CYCLE

Prosses into crankshaft halves. Used On: Columbia/Harley gas, 63*81. 23962-63C

24200-63CONNECTING ROD ASSY., CHD 63-95

Assembly includes rod, upper & lower boarings and crankpin.

Used On: Columbia/Harley 2-cycle gas, 63-95.

24811-63 STUD, CARB MOUNTING, CHD 63-87

1/4-20 threads on manifold end x 1/4-28 threads on carburetor end x 1-7/8" long.

Used On: Columbia/Harley gas, 63-87.

268

BEARING, 62052RS (10)

Ball bearing, sealed both sides. Measures approximately .98' (24.9mm) I.D. x 2.05" (51.9mm) O.D. x .59" (14.9mm) W.

Used On: Club Car gas, 84-UP and electric, 84-86 (inner rear axle); Columbia/Harley gas and electric, 96-00 (rear axle) and 2-cycle gas, 82-95; Cushman (differential); E-Z-Go; Noland; Nordskog; Pargo; Taylor Dunn; Yamaha 4-cycle gas, 85-95 (input shaft) and electric, 81-92 (input shaft}.

83032-96

9032

26806-80AGOVERNOR WIRE, CHD

Governor rod with swedged stop, 17-1/2" long.

Used On: Columbia/Harley gas, 80-82. 26606*80

26807-67GOVERNOR ROD, CHD 67-79

Steel governor rod, original hook style. Used On: ColumbiaMarley gas, 67-79.

26807-67TGOVERNOR ROD,T-STYLE, CHD 67-79

Steel governor rod,T-style.

Used On: Columbia/Harley gas, 67-79.

26814-79GOVERNOR BUTTON, CHD 67-81

Installs on governor plate to provide a rub surface between primary clutch cover and governor plate. (Use with 8137 retainer clip.)

Used On: Columbia/Harley gas, 67-81. 26814-67A

26815-67GOVERNOR ANCHOR KIT, CHO

1/2" hex anchor with drilled hole to slide governor rod through and set-screw. Includes flat washer, wavy tension washer and nut to fasten anchor to governor plate.

Used On: Columbia/Harley gas, 67-81.

26819-67

GOVERNOR ARM ASSEMBLY, CHD

Stamped steel pivot plate; mounts behind clutch primary drive to mechanically control carburetor throttle lever.

Used On: Columbia/Warley gas, 67-81. 26818-6726819-67A

26901-71B

REED PLATE ASSEMBLY, CHD 2CYCLE

Includes reed plate, leaf, reed stop, screw, lock washer and nut.

Used On: Columbia/Ha rley 2-cycle gas, 67-UR

26903-71

REED PLATE, CHD 2CYCLE

Plate only, with four 5/16" mount holes.

Used On: Columbia/Harley 2-cycle gas, 67-UP. .......

26903-63

26905-59

REEO STOP, CHD 2CYCLE

Precision stamped from aluminum alloy.

Used On: Columbia/Harley 2-cycle gas, 63-UP.

26906-59REED LEAF, CHD 2-CYCLE

Stainless steel leaf replaces original copper reed leaf; stronger than original and resists breaking.

Used On: Columbia/Harley 2-cycle gas, 63-UP.

26906-59A

26908-71GASKET, REED PLATE, CHD 2-CYCLE

Die-cut gasket with two pulse holes. Mounts between manifold and reed plate assembly.

Used On: Columbia/Harley 2-cycle gas, 63-95.

27020-80

MANIFOLD, INTAKE. CHD 82-95

Aluminum alloy casting with four drilled mount holes and two threaded carburetor mount holes.

Used On: Columbia/Harley 2-cycle gas, 82-95. Also used in IMC Carb Retrofit Kit, P/N 27158-82RF.

27020-80A

27069-63A GASKET, MANIFOLD, CHD 63-95 (10)

Die-cut gasket. Mounts between reed plate assembly and engine block.

Used On: Columbia'Harley 2-cycle gas, 63-95. 27069-63B

27071-63GASKET, CARB MOUNTING, CHD 63-81

Die-cut gasket. Mounts between carburetor and insulator. Measures approximately 1-7/8" between mount hole centers.

Used On: Columbia/Harley gas, 63-81.

27099-80FUEL PUMP, CHD 2CYCLE

Walbro pump, plastic housing.

Used On: Columbia/Harley 2-cycle gas, 82-UP. (Also used on IMC Carburetor Retrofit Kit, P/N27158-82RF).

27099-92A

27102-G01

SCORECARD HOLDER, CHD, EZ

Injection molded from black HDPE and includes tension clip with pencil holder.

Used On: Columbia/Harley gas and electric, 84-UP; E-Z-Go gas and electric, 83-UR

27110-81

FUEL PUMP REPAIR KIT, CHD, METAL

Kit includes gaskets, springs and diaphragm, for rectangular metal pump.

Used On: Columbia/Harley gas, 82-91.

27158-74RFCARB KIT. CHD 67-74

Kit converts Tillotson diaphragm-typo carburetor to Walbro float-bowl typo carburetor. Greatly improves starting, overall running at all speeds, and fuel efficiency. Kit includes everything for conversion and comes with complete installation instructions.

Used On: ColumbiaVHarloy gas, 67-74.

27126-82GASKET, CARBURETOR, CHD 82-95

Die-cut gasket, carburetor mounting. Used On: Columbia/Harley gas, 82-95.

27131-66CARB REPAIR KIT, CHD 66-81

ForTillotson carburetor model HL-231B. Includes welch plug, inlet valve needle and seat, inlet valve lever, diaphragm cover gasket, diaphragm, fuel pump gasket, fuel pump diaphragm, inlet cover gasket and carburetor mount gasket.

Used On: Columbia/Harley gas, 66-81. 27134-66

O°

27131-82

CARB REPAIR KIT, CHD 82-86

For Walbro carburetor model LMB 230 and 231. Includes inlet valve and seat kit, float lever and spring, idle air adjustment screw, fuel bowl O-ring, and assorted gaskets.

Used On: Columbia/Harley gas, 82-86. 27131-82A

27133-66GASKET SET, CARB, CHD 63-81

For Tillotson carburetor model HL-231B. Includes diaphragm cover gasket, diaphragm, fuel pump gasket, fuel pump diaphragm and inlet cover gasket.

Used On: ColumbiaVHarley gas, 63-81. 27133-66A

27133-82 GASKET SET, CARB, CHD 82-86

For Walbro carburetor models LMB 230 and 231. Includes float bowl O-ring, main fuel jet gasket, fuel valve seat gasket and carburetor gasket.

Used On: Columbia/Harley gas, 82-86.

27158-67 A

CARBURETOR, CHD 67-81

Tillotson double diaphragm-type carburetor. Model HL231B.

Used On: Columbia/Harley gas, 67-81.

27158-74RFCARB KIT, CHD 67-74

Kit convertsTillotson diaphragm-type carburetor to Walbro float-bowl type carburetor. Greatly improves starting, overall running at all speeds, and fuel efficiency. Kit includes everything for conversion and comes with complete installation Repair kit for this instructions. carb is 27763-87 ^Used ^On: Columbia/Harley gas, 67-74.

27158-82CARBURETOR, CHD 82-95

Walbro float bowl carburetor. Improves starting, overall running and fuel efficiency. May also be adapted to early H-D engines that used aTillotson carburetor. (See P/N 27158-82RF.)

Used On: Coiumbia/Harley gas, 82-95. 27158-82C 27158-87E

27158-82RFCARB KIT, CHD 75-81

Kit converts Tillotson diaphragm-type

____^carburetor to Walbro float-bowl type car-

i>^tr^tm&Ji buretor. Greatly improves starting, overall running at all speeds, and fuel efficiency. Kit includes everything for conversion and comes with complete installation instructions.

Used On: Columbia/Harley gas, 75-81. 27160-82

27227-63

INSULATOR, CHD 63-81

Thick fiber gasket for mounting HL-231B carburetor.

Used On: Columbia/Harley gas, 63-81.

27227-81INSULATOR BLOCK, CHD 82-93

For Walbro carburetor to manifold mount Measures approximately 1-13/16" between center of mount holes.

Used On: ColumbiaWarley gas, 82-93.

27258-67CABLE, CHOKE, CHD 3-WHEEL 67-81

Flexible metal vinyl covered housing with solid stainless-steel inner wire and knob, retaining nut and lock washer. Wire diameter is .054" and approximately 83" long, measured from base of knob to end of wire. Housing is approximately 67-1/2" long.

Used On: Columbia/Harley gas, 67-81.

27274-67A

LEVER, THROTTLE SHAFT, CHD_f EZ

For Tillotson diaphragm-type carburetor, model HL231B. * ^v

Used On: Columbia/Harley gas, 67-81; E-Z-Go gas.

27274-82

THROTTLE LEVER, CHD 82-85

Stamped, zinc plated lever for Walbro carburetor.

Used On: Columbia/Harley gas, 82-85.

27276-66 THROTTLE SHAFT & LEVER, CHD

For Tillotson diaphragm-type carburetor model HL231B.

Used On: ColumbiayHarley gas, 67-81.

27674-66CHOKE DISC. CHD 66-81

ForTillotson diaphragm-type carburetor model HL231B.

Used On: Columbia/Harley gas, 66-81.

27688-71SCREW, IDLE ADJUSTING. CHD 71-81

"T" style adjusting screw used on Tillotsort carburetor. Approximately 2-5/16' long.

Used On: Columbia/Harley gas 71-81.

27693-66INLET NEEDLE VALVE, SEAT & GASKET,

CHD

Used on Tillotson diaphragm-type car-buretor, model HL231B.

Used On: Columbia/Harley gas, 66-81.

27705-66ASPRING, THROTTLE RTRN, CHD 66-81

For Tillotson diaphragm-type carburetor model HL231B.

Used On: Columbia/HaHey gas, 66-81.

27715-55CUR CARBURETOR, CHD 63-81.EZ

Secures wire block to the choke shaft lever.

Used On: Columbia/Harley gas, 63-81; E-Z-Go 2-cycle gas.

27715-61WIRE BLOCK, CARB, CHD. EZ

For fastening choke wire to choke lever on carburetor.

Used On: Columbia/Harley gas, 63-81; E-Z-Go gas (Prior to 1976}.

27715-66THROTTLE DISC, CHD 66-81, E2

For Tillotson diaphragm-type carburetor model HL231B.

Used On: ColumbiayHarley gas, 66-81; E-Z-Go gas, 75 and earlier.

27716-61WASHER, CARBURETOR, CHD,EZ

OSpring tension washer for choke wire

block on Tillotson carburetor.

Used On: Columbia/Harley gas, 63-81; E-Z-Go gas.

27726-61CURTHROTTLE SHAFT. CHD, EZ

ForTillotson diaphragm-type carburetor model HL231B.

Used On: Columbia/Harley gas, 63-81; E-Z-Go 2-cycle gas, 75 and earlier.

27730-67

CHOKE SHAFT & LEVER. CHD 67-81

ForTillotson diaphragm-type carburetor model HL231B.

Used On: Columbia'Harley gas, 67-81.

27731-61WASHER. SEAL, CARBURETOR, CHD

Seal for the choke and throttle shaft on Tlllotson carburetor.

Used On: ColumbiayHarley gas. 63-81.

27736-65WASHER, BRASS, CARBURETOR, CHD

IIFor Tillotson diaphragm-type carburetor

^^model HL231B.

Used On: Columbia/Harley gas, 63-81.

27763-87CARB REPAIR KIT, CHD 87-95

0_ ForWalbro carburetor models WHL 9,10 and 11. Kit includes: Needle valve, spring, float plug washer, fulcrum pin and bowl "~ O-ring.

Used On: Columbia/Harley 2-cycle gas, 87-95.

27809-63A

DIAPHRAGM, FUEL PUMP, CHD 63-81

ForTillotson diaphragm-type carburetor model HL231B. Replaces 2-piece diaphragm.

Used On: Columbia/Harley gas, 63-81.

27815-63CHECK VALVE, CHD 63-81

ForTillotson diaphragm-type carburetor model HL231B.

Used On: Columbia/Harley gas, 63-81.

27816-63DIAPHRAGM, CHD 63-81

ForTillotson diaphragm-type carburetor model HL231B.

Used On: Columbia/Harley gas, 63-81.

27071-63GASKET, CARB MOUNTING, CHD 63-81

Die-cut gasket. Mounts between carburetor and insulator. Measures approximately 1-7/8' between mount hole centers.

Used On: Columbia/Harley gas, 63-81.

282

STARTER GENERATOR, CC, CHD

Hitachi-style starter-generator.

Used On: Club Car gas, 84-96; Columbia/Harley 2-cycle gas, 67-95.

30083-69A 30083-69B 30083-69C 30083-69D

29046-71 STUD, AIR CLEANER MOUNTING

1/4-20 threads both ends x 9-1/8" long. Used On: Columbia/Harley gas, 70-71.

29046-72STUD, AIR CLEANER, CHD 72-83

1/4-20 threads on one end, 3/8-16 threads on other end x 9-1/8" long.

Used On: Columbia/Harley gas, 72-83.

29109-82HOSE, CARBURETOR INTAKE, CHD

For use on Walbro carburetor model LMB231.

Used On: Columbia/Harley gas, 82-87

29109-82HOSE, CARBURETOR INTAKE, CHD

For use on Walbro carburetor model LMB231.

Used On: Columbia/Harley gas. 82-87.

29130-68ACCANISTER, AIR FILTER, CHD, EZ

Canister ONLY! Without filter, dust unloador or clamp.

Used On: Columbia/Harloy gas, 68-83; E-Z-Go 2-cycle gas, 76-91.

29138-71GASKET, AIR INTAKE, CHD 71-95

Die-cut neoprene gasket. Mounts between Tillotson carburetor and air horn. Measures approximately 1-3/16" I.D. x 1-11/16" O.D.x 9/32" thick.

Used On: Columbia/Harley gas, 71-95.

29142-71GASKET, AIR CLEANER, CHD, E2

Die-cut neoprene gasket. Mounts between air cleaner horn and canister (dry filter type). Measures approximately 1-15/16" I.D. x 3-1/8" O.D. x 3/32" thick.

Used On: Columbia/Harley gas, 67-83; E-Z-Go gas.

292

BEARING, 6203 2RS

Ball bearing, sealed both sides. For outer front wheel. Measures approximately .66" (16.8mm) I.D. x 1.57" (39.9mm) O.D. x .47" II 1.9mm) W.

Used On: Club Car; Columbia/Harley; Cushman; E-2-Go; Jacobsen; Toro; Yamaha 2-cycle gas and electric, 78-81.

30150-67

90004-90

BRAKE DRUM, CC, CHD, EZ.YAM {8)

Machined casting with a 4 on 4 bolt pattern. Measures approximately 6.28" I.D. Brake shoe surface area is 1.34" wide.

Used On: Club Car gas and electric, 81-94; Columbia/Harley; E-Z-Go; Yamaha gas and electric, 82-UR

41815-86

29941-79

STRAP, START GEN, CHD 79-95

Stamped steel plate with adjustment slot. Zinc plated.

Used On: Columbia/Harley gas, 79-95.

29949-69

STARTER GENERATOR MTG. KIT, CHD

Converts spring tensioner to strap tensioner. Includes bracket and hardware.

Used On: Columbia/Harley gas, 67-78.

o o

301BRAKE PUCK KIT, CHD, DE-40/MGIV

Set of replacement pucks for caliper-type brakes.

^ J Used On: Columbia/Harley electric, 76-81

—'(DE-40 and MG-IV).

GENERATOR END CAP W/BRUSHES

Replacement for Hitachi-style starter generator.

Used On: Club Car gas, 84-96; Columbia/ Harley 77-UP (Hitachi style); E-Z-Go gas, 80-UP; Hyundai gas, 91-UP (HGG1); Yamaha gas, 78-95 IGl, G2. G8. G9. G14).

30111-77GENERATOR END CAR BELT SIDE

Replacement for Hitachi-style starter generator.

Used On: Club Car gas, 84-UP; Columbia/ Harley 77-UP (Hitachi style); E-Z-Go 2-cyclc gas, 80-UP; Yamaha 2-cycle gas, 78-89 (G1).

30149-67BEARING, 62022RS (10)

Ball bearing, sealed both sides. Measures approximately .59* (14.9mm) I.D. x 1.38" (35mm) O.D. x .43" (10.9mm) W.

Used On: Club Car gas; Columbia/Harley gas, 67-95; Cushman; E-Z-Go 2-cycle gas, 78-94 and 4-cycle, 91-UP; Hyundai gas; Melex; Toro; Yamaha gas, 78-UP (G1, G2, G8_t G9, G16).

30154-77

BEARING, 62022RS (10)

Ball bearing, sealed both sides. Measures approximately .588" < 14.93mm) I.D. x 1.377" (34.97mm) O.D. x .431" (10.94mm) W.

Used On: Club Car gas; Columbia/Harley gas, 67-95; Cushman; E-Z-Go 2-cycle gas, 78-94 and 4-cycle, 91-UP; Hyundai gas; Melex; Toro; Yamaha gas, 78-UP <G1, G2, 08,09,016).

30151-69

BEARING, 63032RS (10)

Ball bearing, sealed both sides. Measures approximately .67" (17mm) I.D. x 1.85" (46.9mm) O.D. x .55" (13.9mm) W.

Used On: Club Car gas; Columbia/Harley 2-cycle gas, 67-95; E-Z-Go; Hyundai gas; Melex; Yamaha gas, 78-UP (Gl, G2, G8, G9).

30153-77

30353-G1DIODE, CC, CHD. EZ

3.0-amp diode for solenoid.

Used On: Club Car electric, 90-UP; Columbia/Harley electric, 90-UP (with electronic controller); E-Z-Go electric, 89-94 (Marathon); Jacobsen; Melex.

7488667

30381-63BRUSH SET. GENERATOR, CHO 63-66

Set of 4 brushes (with tension springs) for

| 1 | 1 Siba internal-style starter-generator.

*- ^- «i~ *~ Measures approximately 5/8* L x 3/8" W.

Brush thickness is wedge shaped from 1/4"

to 3/16".

Used On: Columbia/Harley gas, 63-66 {63-72 on Harley utility vehicle).

30443-77BRUSH SET, GEN, CC, CHD, EZ, YAM

Set of 4 brushes for use in Hitachi-style starter-generator. Measures approximately V L x 17/32" W x 7/32" thick.

Used On: Club Car gas, 84-96; Coiumbia/Harley gas, 67-UP; E-Z-Go gas. 80-UP; Hyundai gas, 91-UP; Yamaha gas, 78-UP {G1, G2, G8, G9, Gil. G14, G16).

30422-69

30508-71

POINT PLATE, CHD 7185

Mounting plate for points and condenser. Used On: Columbia/Harley gas, 71-85.

30509-86IGNITION MODULE, CHD

Base plate with plastic module and wires. Mounts in fan housing.

Used On: ColumbiaVHarley 2-cycle gas, 86-95.

30605-48APOINT SET, CHD 67-69

Two-piece point set.

Used On: Columbia/Harley gas, 67-69.

30607-63

POINT SET, CHD 63-66

For use with internal starter-generators. Used On: ColumbiayHarley gas. 63-66.

30860-77ARMATURE, STARTER, CC. CHD. E2, YAM

Armature only for Hitachi-style starter-generator.

Used On: Club Car gas, 84-96; Columbia/Harley 2-cycle gas, 69-98 early; E-Z-Go 2-cycle gas, 80-94 (Marathon); Hyundai gas, 91-UP; Yamaha gas, 78-95 (G1,G2,G8,G9,G11, G14).

30083-69E30083-95

UNIVERSAL

312BBENCH SEAT ASSEMBLY, BLACK

me bottom has an industrial graae Toam cusnion covered with molded heavy-duty grade vinyl, measuring approximately 18" front to rear, 39" W, 5" thick in front and 3" thick in rear. The back is 2" thick foam covered with molded heavy-duty grade vinyl, measuring approximately 18" H, 39" W and 3" thick. Includes cast aluminum supports and hardware for mounting seat back, seat bottom and arm rest cushions.

Used On: Universal application for many golf cars. Some adapting may be necessary.

UNIVERSAL

312WBENCH SEAT ASSEMBLY, WHITE

The bottom has an industrial grade foam cushion covered with molded heavy-duty grade vinyl, measuring approximately 18" front to rear, 39" W, 5" thick in front and 3" thick in rear. The back is 2" thick foam covered with molded heavy-duty grade vinyl, measuring approximately 18" H, 39" W and 3" thick. Includes cast aluminum supports and hardware for mounting seat back, seat bottom and arm rest cushions.

Used On: Universal application for many golf cars. Some adapting may be necessary.

313FRFOOTREST, ALUMINUM

Made of heavy gauge diamond plate aluminum for use with rear-facing seat installations. {Measures approximately 34-1/4" W, 6-3/4" D, with a 2-1/2" mounting lip). Excellent for use with 312 W or 312B.

Used On: Universal use for many types of golf cars and industrial vehicles.

31476-79

MOUNTING BRACKET, GENERATOR

Stamped steel bracket, zinc plated.

Used On: Columbia/Harley 2-cycle gas, 79-UP.

31601-63ACOIL, IGNITION, CHD, EZ

Ignition coil with two threaded terminal connections.

Used On: Columbia/Harley 2-cycle gas, 63-95; E-Z-Go 2-cycle gas, 76-80.

31610-53COIL BRACKET, CHD, EZ

Ignition coil mounting bracket, zinc plated. Includes tension screw.

Used On: Columbia/Harley gas, 63-UP.

319SOLENOID, 12V-4T. COPPER/SHORT

12-volts, 4-terminals, copper contacts with short metal housing.

"^ -Used On: Columbia/Harley gas, 63-UP;

& o o o Cushman; E-Z-Go gas, 79-94 (Marathon); © o O ° Jacobsen

70-11122470-111224-2B1

70-111224-5B171470-63C

71470-63D71580-75

31981-92SPARK PLUG WIRE, CHD 63-95

7mm wire with coil and spark plug boots.

Used On: ColumbiayHarley 2-cycle gas, 63-95.

32301-78CSPARK PLUG, BP4HS (10,200)

NGK BP4HS.

Used On: Columbia/Harley 2-cycle gas, 82-95; E-Z-Go 4-cycle, 91-93 (Marathon); Yamaha 2-cycle gas, (G1).

32585-67COVER. POINTS, CHD 67-84

DISCONTINUED

Stamped steel plate with two drilled holes and one slotted hole. Zinc plated.

Used On: Columbia/Harley gas, 67-84.

DISCONTINUED

32591-67B

GASKET, INSPECT CVR, CHD 67-84

Die-cut gasket with two hofes and a slot, for ignition points cover plate.

Used On: Columbia/Harley gas, 67-84. 32591-67C

32661-70

POINT SET, CHD 70-85

One-piece point set with adjustment sic Used On: Columbia/Harley gas, 70-85.

32726-30ACONDENSOR W/BRACKET, CHD 70-85

Includes mounting bracket.

Used On: Columbia/Harley gas, 70-85.

32724-63A 32726-47

32949-68F&R SWITCH, W/0 LVR & SPRING, CHD

Assembly includes floating and stationary contacts.

Used On: Columbia/Harley gas, 68-81.

32959-68

BASE PLATE, REV SWTCH. CHD 68-81

Injection molded from heat resistant material.

Used On: Columbia/Harley gas, 68-81.

32972-68COVER, REVERSE SWITCH, CHD 68-81

Injected molded from heat-resistant material.

Used On: Columbia/Harley gas, 68-81.

32976-68

CONTACT, CHD 68-81

Copper contact in forward and reverse switch. 2 per car.

Used On: Columbia/Harley 68-81.

32978-68

CONTACT STOP, CHD 68-81

Fiberboard holds floating contacts in forward and reverse switch.

Used On: Columbia/Harley 68-81.

32983-68 GASKET. REVERSE SWITCH FELT, CHD

Die-cut "felt" gasket.

Used On: Columbia/Harley gas, 68-81.

32988-68CONTACT, F&R, CHD 68-81

Hex head contact stud for forward and reverse switch. Solid copper with 5/16 -18 thread.

Used On: Columbia/Harley gas, 68-81.

33245-82A

CLUTCH, SECONDARY, CHD 82-91

Direct OEM style assembly.

Used On: Columbia/Harley gas, 82-91.

33245-8233245-82B

33248-82 RAMP SHOE, CHD 82-91

Injection molded from durable nylon for secondary drive. (3 per car)

Used On: Columbia/Harley gas, 82-91.

335ABRAKE SHOES, CC, EZ, YAM

Bonded lining measures approximately 1-3/16" wide. Rear lining is approximately 5-15/16" long; front is approximately 6" long.

Used On: Club Car 95-UP; Columbia/Harley gas and electric, 86-UP; E-2-Go gas and electric, 87-96; Hyundai gas and electric <HGB1,HGB1A, HGG1);Jacobsen; Yamaha gas and electric, 82-93 <G1. G2, G8, G9).

335BBRAKE SHOE, SHORT/FRONT

Bonded lining measures approximately 1-3/l6"Wx6"L

Used On: Club Car gas and electric, 95-UP; Columbia/Harley gas and electric, 86-UP; E-Z-Go gas and electric, 87-96; Hyundai gas and electric, 91-UP; Yamaha gas and electric, 82-93 <G1, G2, G8, G9).

BRAKE SHOE, LONG/REAR

Bonded lining measures approximately 1-3/16" Wx 5-15/16" L

Used On: Club Car gas and electric, 95-UP; Columbia/Harley gas and electric, 86-UP; E-Z-Go gas and electric. 87-96; Hyundai gas and electric, 91-UP;Yamaha gas and electric, 82-93 (G1, G2, G8, G9).

Eliminate this tip in all sections except E-Z-GO.

337FITTING, BRASS, WALBRO CARB, CHD

Fitting has external threads for connecting fuel hose between carburetor and fuel pump.

Used On: Columbia/Harley gas, 80-84.

338FITTING, WALBRO FUEL PUMP

Fitting has internal threads for connecting fuel hose between carburetor and fuel pump.

Used On: Columbia/Harley gas, 80-84.

339RIVET, PUSH, BLACK

Black colored "push-in" type rivet made of ABS plastic for 1/4" hole size.

Used On: Miscellaneous uses on a variety of golf cars.

3391RIVET, PUSH, IVORY

Ivory colored "push-in" type rivet made of ABS plastic for 1/4" hole size. Color matched to Yamaha ivory.

Used On: Miscellaneous uses on a variety of golf cars.

346 SPARK PLUG, BP5HS (10,200)

NGK BP5HS.

Used On: ColumbiaVHarley 2-cycle gas, 63-68 and 82-95; E-Z-Go 2-cycle gas, 76-94 {Marathon); E-Z-Go 4-cycle, 91-93 {Marathon); Yamaha 2-cycle gas, 78-89 <G1h

32301-78A 32303-47A 32305-98

34862-61B

FLANGE COVER ASSY, CHD 63-81

Includes cover {1), P/N 34865-63 plug (1) andP/N11109O-ring<1).

Used On: Columbia/Harley gas, 63-81.

Tips: It is always best to apply a coating of 30W oil on the inside of the cover so that it will slide over the large 11109 O-ring in the groove of the floating flange.

34865-63PLUG, FLANGE COVER, CHD 63-81

Rubber "push-in" drain plug.

Used On: Coiumbia/Harley gas, 63-81.

34865-82BGOVERNOR BUTTON, CHD 82-95

Injection molded rub button for use between primary drive cover and governor plate.

Used On: Columbla/Harley gas, 82-95. 34865-82E

36369-77

SEAL KIT, PRIMARY DRIVE. CHD 71-81

Kit includes: P/N 9120 {1), P/N 9121{1)_r

P/N9122 (1) O-rings; P/N 9517lock;

washer (1), P/N 4601 plug (1),P/N 3939 felt seal (1).

Used On: Columbia/Harley gas, 71-81 (aluminum flange).

If out of stock individual parts may be available

36389-69

BELT. GENERATOR, CHD 63-71

Reinforced belt. Measures approximately 5/16"Wx30"O.D.

Used On: Columbia/Harley gas, 69-71. 36389-69G

36389-72

BELT, GENERATOR, CHD 82-95

Reinforced bell. Measures approximately 1/2* W x 20-1/4* O.D.

Used On: Columbia/Harley 2-cycle gas, 72-79 and 82-95.

36389-72A 36389-72G

36389-72B

36389-80

BELT, GENERATOR, CHD 80-81

Roinforced belt. Moasures approximately 7/16"Wx29"O.D.

Used On: Columbia/Harley gas, 80-81. 36389-80G

36390-67

BELT, GENERATOR. CHD 67-68 (10)

Reinforced bolt. Measures approximately 5/16' W x 27-3/4" O.D. (For Siba-style starter-generator with narrow pulley)

Used On: Columbia/Harley gas. 67-68. 36390-67G

36394-61

BELT, DRIVE, CHD 63-66 (10)

Reinforced belt. Measures approximately 1-3/16" Wx 39" O.D.

Used On: Columbia/Harley gas, 63-66.

36394-67

BELT, DRIVE, CHD 67-81 (10)

Reinforced belt. Measures approximately 1-3/16" Wx 37-1/4" O.D.

Used On: Coiumbia/Harley gas, 67-81. 36394-67G

36397-71ABUSHING, REAR FLOAT FLANGE. CHO

Oilite bushing for use in secondary clutch. Measures approximately 1.37" {35mm) I.D. x 1.53' <38.9mm) O.D. x 1.50" (38.1mm) L

Used On: Columbia/Harley gas, 71-81.

36398-82

BELT, DRIVE, CHD 82-91 (10)

Reinforced belt. Measures approximately 1-7/32'Wx 35-5/8'O.D.

Used On: Columbia/Harley gas, 82-91. 36390-82 36390-82A 36398-82A

36398-92

BELT, DRIVE, CHD 92-95 (10)

Reinforced belt. Measures approximately 1-1/8" W x 36-1/4" O.D.

Used On: Columbia/Harley 2-cycle gas, 92-95.

36400-71BCLUTCH, SECONDARY, CHD 67-81

Use without 36421-77 spacer for 67-75; Use with spacer for 76-81, thick hub. Spacer measures approximately 0.31" (7.7mm) thick.

Used On: Columbia/Harley gas, 67-81.

Tips: Worn bushings can cause the moveable sheave to "hang-up" or seize on the shaft, causing the car to operate erratically. Removing the drive belt and squeezing the two flanges together at the top will give you a good indication if the bushing is worn excessively.

36400-67E36400-71C

36401-67C

FLANGE, FLOATING, CHD 67-81

Die cast aluminum alloy flange. Assembly includes P/N 36397-71A bushing (1), P/N 36407-59 cam rollers (2) and P;N 36408-70 cam roller pins (2).

Used On: Columbia/Harley gas, 67-81.

36404-71

FLANGE, STATIONARY, CHD 71-81

Die cast aluminum alloy flange. Used On: Columbia/Vlarley gas, 71-81.

36407-59CAM ROLLER, REAR FLNG, CHD 63-81

Injection molded of hi-impact plastic. (2 per car).

Used On: Columbia/Harley gas. 63-81.

36408-70PIN, CAM ROLLER, CHD 63-81

Used on 36404-71 stationary flange. (2 per car)

Used On: Cotumbia/Harley gas, 63-81.

36410-71AFLANGE HUB, CHD 71-75

Used with secondary drive assembly. (Thin style - approximately 0.69" thick).

Used On: Columbia/Harley gas, 71-75. 36415-71A

36410-71B

FLANGE HUB, CHO 76-81

Thick hub. Measures approximately 1.02" (25.9mm) thick.

Used On: Columbia/Harley gas, 76-81.

36418-70SPACER, RUBBER, THIN, CHD

Used between rear floating and stationary flanges. Measures approximately 0.104* (2.6mm) thick.

Used On: Columbia/Harley gas, 71-75.

36418-70A SPACER, RUBBER, THICK, CHD

Used between rear floating and stationary flanges. Measures approximately 0.19" (4.8mm) thick.

Used On: Columbia/Harley gas, 67-81.

36420-67

RACE, INNER, CHO 67-81

For primary drive clutch.

Used On: Columbia/Harley gas, 67-81.

36421-77SPACER, CHD 76-81

Converts thin-style hub to thick-style. Measures approximately 0.306" (7.7mm) thick.

Used On: Columbia/Harley gas, 76-81.

36426-71INSERT. SEC DRIVE, CHD 71-81

Steel hex-head insert with 5/16-24 threads. (4 per car.)

Used On: Columbia/Harley gas, 71-81.

36429-59A

SPRING CUP, SEC DRIVE, CHD 63-81

Stamped retainer cup, made of zinc-coated steel.

Used On: Columbia/Harley gas, 63-81.

SPRING,OUTER,SEC DRIVER.CHD 63-81

7-coil spring, zinc plated. Measures approximately 6-1/8" long.

Used On: Columbia/Harley gas, 63-81.

36431-72

SPRING, INNER, SEC DRIVER. CHD 63-81

7-coil spring. Measures approximately 2-5/8" long.

Used On: Columbia/Harley gas, 63-81.

36446-72FLANGE, DRIVE, CHD 72-81

Cast iron flange, precision machined and balanced. Wide groove for use with 7/16" wide belt.

Used On: Columbia/Harley gas, 72-81.

36449-61FLANGE, PRIMARY CLUTCH, CHD 6381

Machined aluminum casting. Assembly includes: P/N 36457-61 bushing <1), P/N 11108 O-ring |1), P/N 36553-61 ball stops (31 and P/N 36460-61 slide strips (3).

Used On: Columbia/Harley gas, 63-81.

Tips: To keep the shaft from turning when torquing the shaft nut that holds the primary clutch assembly onto the engine crankshaft, always use a strap-wrench or special Columbia/Harley "transmission holding tool" {P/N 97330-62A). NEVER USE A SCREWDRIVER OR OTHER TYPE OF PRY BAR TO WEDGE BETWEEN THE STUDS ON THE FLOATING FLANGE! Doing so will result in bending the studs and prevent the clutch from operating properly. (Correct torque is 40 ft.-lbs.I

36449-61CPCLUTCH KIT, PRIMARY, CHD 71-81

Includes: P/N 23732-64B sleeve (1), P/N 34862-61B flange cover (1>, P/N 36369-77 seal kit (1), P/N 36449-61 front floating flange <1), P/N 36516-71 drive cup assembly (SPLINE GROOVES MUST BE FILED DOWN TO FIT ORIGINAL HARLEY CRANKSHAFT (1), P/N 36534-63 drive cup spring (3), P/N 36540-61 spring collar (3), P/N 36555-61 spring retainer (3), P/N 6242W washers (3). P/N 7704 locknut (3}_rP/N 7988 jam nut (1), and P/N 8874 steel ball (3).

Used On: Columbia/Harley gas, 71-81.

36457-61BUSHING, PRIMARY CLUTCH, CHD 63-81

Oilite bushing. Measures approximately 1.57* (40mm) I.D x 1.72" (43.6mm) O.D x 1.37" (34.8mm) L.

Used On: Columbia/Harley gas, 63-81.

36460-61SUDE STRIP, CHD 61-81

Brass alloy strip with 2 drilled holes. (3 per car).

Used On: Columbia/Harley gas, 61-81.

36462-67 BEARING ASSY, CHD 64-81

Includes: P/N 36462-67 1/4 sleeve (1) and Plti 36462-67 1/2 needle bearing (1). Sleeve O.D. is approximately 1.5" (38.1mm). (ASSEMBLY DOES NOT INCLUDE P/N 36420-67, INNER RACE)

Used On: Columbia/Harley gas, 64-81.

36466-61RETAINER, 0 RING, CHD 61-81

Stamped steel retainer, zinc plated. Used On: Columbia/Harley gas, 61-81.

36467-61SEAL, FELT, CHD 61-81

Die-cut felt dust shield.

Used On: Columbia/Harley gas, 61-81.

36516-71DRIVE CUP ASSY, CHD 71-81

Aluminum casting with ball strips and bushings (6-spline). SPLINE GROOVES MUST BE FILED DOWN TO FIT ORIGINAL HARLEY CRANKSHAFT.

Used On: Columbia/Harley gas, 71 1/2-81.

Tips: For 1971 cars, it fits six spline crankshaft only.

SPRING, DRIVE CUP, CHD 63-81

9-coil spring for primary drive clutch assembly. Measures approximately 3-1/16" long.

Used On: Columbia/Harley gas, 63-81.

36540-61COLLAR, DRIVE CUP, CHD 63-81

Stamped steel collar, zinc plated. (3 per car)

Used On: Columbia/Harley gas, 63-81.

Tips: Placing a small dab of grease or Vaseline on the flat side of each 36540-61 spring collar before placing them inside the flange cover, will make the installation much easier.

36549-59BUSHING, DRIVE CUR CHD 63-81

Oilite bushing • three required per drive cup. Measures approximately .38" (9.8mm) I.D. x .47' (12.1mm) O.D x .75" (19.1mm) L

Used On: Columbia/Harley gas, 63-81.

36549-59BUSHING, DRIVE CUP, CHD 63-81

Oilite bushing - three required per drive cup. Measures approximately .38" (9.8mm) I.D. x .47" (12.1mm) O.D x .75' (19.1mm) L

Used On: Columbia/Harley gas, 63-81.

36553-61DRIVE CUP BALL STOP, CHD 63-81

Used in 36449-61 front floating flange. (3

P^er ^flan9e>-

Used On: Columbia/Harley gas, 63-81.

36554-61 DRIVE CUP BALL STRIP, CHD 63-81

Used with 36516-63 and -71 drive cup. (3 per drive cup).

Used On: Columbia/Hdrley gas, 63-81.

36555-61RETAINER, DRIVE CUP, CHD 63-81

Stamped steel retainer, zinc plated. (3 required per assembly)

Used On: Columbia/Harley gas, 63-81.

36578-82B

CLUTCH, PRIMARY, CHD 82-91

fit

Variable speed primary drive unit, calibrated to provide quiet, efficient, sensitive and smooth operation at all speeds.

Used On: Columbia/Harley gas, 82-91. 36578-82 36578-82A 36578-82C

36578-92CLUTCH, PRIMARY, CHD 92-95

Variable speed primary drive unit, calibrated to provide quiet, efficient, sensitive and smooth operation at all speeds.

Used On: ColumbiayHarley 2-cycle gas, 92-95.

36598-84

WEIGHT, PRIMARY CLUTCH, CHD 82-91

Weight for Comet-style clutch assembly. Used On: Columbia/Harley gas, 82-91.

40503-68

SPRING, BRAKE PEDAL RETURN, CHD

Approximately 3" overall length.

Used On: Columbia/Harley gas and electric, 68-82.

40528-68CABLE, THROTTLE, CHD 68-79

Flexible metal vinyl covered housing with solid stainless-steel inner wire. Housing has a 3-3/4" metal sleeve on one end and plastic clamp bracket on other end. Approximate measurements: Housing: 50-3id'; Cable: 66".

Used On: Columbia/Harley gas, 68-79 40525-67

40530-80CABLE, THROTTLE, CHD 80-87, 3W

Flexible metal vinyl covered housing with solid stainless-steel inner wire. Housing has a 3-7/8' metal sleeve on one end and metal clamp bracket on other end. Approximate measurements: Housing: 42-1/2"; Cable: 49-1/8".

Used On: Coiumbia/Harley gas, 80-84, and 3/wheel gas, 80-87

41199-66BOLT, LUG, CHD

1/2-20 x 1-1/4" long, with serrated shoulder. Uses P/N 43152-66 lug nut.

Used On: Columbia/Harley gas and electric, 66-85; E-Z-Go.

41199

41424-63WASHER, SPRING, CHD 63-85

Tension washers for brake assembly and floor mounted forward and reverse switch.

Used On: Columbia/Harley gas and electric, 63-85.

41810-64ABRAKE PAD KIT, CHD

Kit includes drilled friction pads (2) and brass rivets (8).

It-_ , -

electric, 64-85 (3 and 4-wheel) 1111 MM columbia/Harley electric, 76 (DE-40 only).

41834-67

SPRING,GOVERNOR, CHO 67-89

Heavy-duty tension-type coil spring, zinc platod for corrosion protection. Measures approximately 6-3/16" long.

Used On: ColumbiayHarley governor, 67-89; and brake pedal, 82-84.

41841-63 RIVET, BRAKE, 9/64D X 1/2L

Brass, flat-head rivet, 9/64" diameter x 1/2" length.

Used On: Columbia/Harley, all models using 41810-64A brake linings. Eight required per car.

42439-86 CABLE, THROTTLE, CHD 4W 82-88

Flexible metal vinyl covered housing with solid stainless-steel inner wire. Housing has a 3-7/8" metal sleeve on one end and metal clamp bracket on other end. Approximate measurements: Housing: 35-1/2"; Cable: 43".

Used On: Columbia gas, 4W, 82-88.

42617-78

CABLE, BRAKE. CHD, DE40&MG4 78-81

Flexible metal vinyl covered housing with stranded steel inner cable. Used with puck-type caliper brake assembly.

Used On: Columbia/Harley electric, 78-81 (DE-40 and MG-IV).

43152-66 NUT, LUG. 1/2"-20. CC. CHO. EZ

1/2-20 thread -fine plated steel lug nut.

Used On: Club Car; Cotumbia/Harley; Cushman; E-Z-Go; Jacobsen; Melex; Nordskog; Pargo; Taylor Dunn.

43568-80SHIM, MAIN BEARING, CHD 63-81

Prevents connecting rod bearing from cutting into race of connecting rod.

Used On: Columbia / Harley gas, 63-81.

43568-80 SHIM, MAIN BEARING, CHD 63-81

Prevents connecting rod bearing from cutting into race of connecting rod.

Used On: Columbia/Harley gas, 63-81. 43560-35

43615-89WHEEL HUB, REAR, CHD, EZ

Splined hub.

Used On: Columbia/Harley. 82-94; E-Z-Go 82-93.

82707-82

43732-63AOIL SEAL,3-WHEEL FRONT.CHD, EZ

For use on front wheel hubs, (3/4* spindle) and other applications.

Used On: Columbia/Harley gas and electric, 67-81 (3-wheel cars); E-Z-Go gas and electric. 67-UP (3-wheel); Melex; Pargo; Toro.

43874-70AXLE, FRONT, CHD 70-80

Threads into fork slider on 3/wheel cars. Measures approximately 14-7/16" long.

Used On: Columbia/Harley gas and electric 3-wheel, 70-80.

47739-63 CABLE, BRAKE, GAS, CHD 63-81

Flexible metal vinyl covered housing with stranded steel inner cable. Approximate measurements: Housing, including threaded adjustment barrel: 45*; Cable: 58-1/2". Cable assembly includes two clevis pins with flat washers and two adjusting nuts with flat washers.

Used On: ColumbiayHarley gas, 63-81. 47739-63A 47739-63B

43300-60

BEARING SET, L44643/L44610

SET: :

For use on front wheel hubs, (1" spindle) and other applications. Measures approximately .990" {25.Umm> I.D. x 1,930" (50,29mm) Q.D. x .578" (U.68mm) W.

Used On: Columbia/Harley; Cushman; E-Z-< Go; Legend; Melex;Taylor Dunn.

497 CLEVIS PIN, 5/16" XV

Plated pin with drilled hole for cotter pin. Uses P/N 10387-G1 cotter pin (NOT included).

Used On: Club Car gas and electric, 81-UP; Columbia/Harley; Davis; E-Z-Go gas and electric, 65-UP; Jacobsen; Karrior; Legend; Melex; Nordskog; Pargo; Taylor Dunn.

50278-67A BAG MAT, PASS, CHD 67-84

Die-cut black vinyl with pebble-texture finish.

Used On: Columbia/Harley gas and electric, 67-84, 3 or 4-wheel with classic body style. (Not for DE-40, MG-IV or Challenger models.)

50278-67B

50279-67ABAG MAT, DRIVER, CHD 67-84

Die-cut black vinyl with pebble-texture finish.

Used On: Columbia/Harley gas and electric, 67-84, 3 or 4-wheel with classic body style. (Not for DE-40, MG-IV or Challenger models.)

50279-67B

50303-66A

BODY TRIM. 3', CHD

Black vinyl pinch weld, single lip, pebble-texture. Cut into 3' lengths to fit left hand or right hand leg shields.

Used On: Columbia/Harley gas and electric, 63-83 (3-wheel cars).

50303-66B

BODY TRIM, 50" ROLL

Black vinyl, pinch weld, single lip, pebble-texture.

Used On: Multiple uses for covering exposed metal or plastic edges.

50302-79

50528-67

FLOORMAT. PASS, CHD 3-WHEEL

Die cut 3/16" thick rubber.

Used On: Columbia/Harley gas and electric, 67-83 {3-wheel|.

50529-67AFLOORMAT, DRIVER, CHD 3-WHEEL

Oie cut 3/16" thick rubber.

Used On: Columbia/Harley gas and electric, 67-83 (3-wheel).

52134-63COVER. BOTTOM. CHD 63-71 (OBS)

Molded one-piece white heavy-duty vinyl cover. Matches OEM pattern.

Used On: Columbia/Harley gas and electric, 63-71.

54513-66 SHOCK, REAR, CHD 67-88

Bushing mount both ends. Compresses to 11-7/8"; extends to 18-1/8*. measured end to end.

Used On: Columbia/Harley gas and electric, 67-88.

54514-73

57098-84A

STEERING WHEEL COLLAR, CHD, EZ

Guide collar goes over steering post before steering wheel is installed.

Used On: Columbia/Harley gas and electric, 84-95; E-Z-Go gas and electric, 83-99.

61094-75HOSE FITTING, CHD 75-95

90-degree elbow (with grommet) for top of the plastic gas tank.

Used On: Columbia/Harley 2-cycle gas, 75-95.

61117-71GASKET, GAS CAP, CHD

Die-cut neoprene gasket. Measures approximately 1-3/4" I.D. x 1-7/8' O.D. x 1/8* thick.

Used On: Columbia/Harley gas.

612ROLL PIN, SEC DRIVE, CHD 67-81

Secures cam roller in rear floating flange. (2 per car}

Used On: Columbia/Harley gas. 67-81.

61247-75VENT FITTING, CHD 75-UP

"Push-in" vent valve

Used On: ColumbiayHarley, 75-UP.

GAS CAP, WITH GAUGE, CHD 75-95

Gas cap and seal with non-electric float-actuated indicator gauge.

Used On: Columbia/Harley gas, 75-95.

61254-89

GAS CAP, CHD

Gas cap and seal, without gauge.

Used On: Club Car; Columbia/Harley gas, 75-95; Hyundai gas, 91-UP.

62346-75FUEL PICKUP ASSY, CHD 75-95

Strainer and check valve for the bottom of plastic gas tank.

Used On: Columbia/Harley 2-cycle gas, 75-95.

62350-63

FILTER, FUEL, 1/4", CC, CHD, EZ

In-line 1/4" clear plastic filter. (Will NOT snap into Club Car frame.)

Used On: Club Car gas, 84-91; Columbia/ Harley; E-Z-Go 2-cycle gas, 76-94 (Marathon}; Jacobsen; Many applications for golf and utility vehicles using 1/4" fuel line.

63501-68

FUEL LINE. 4 FOOT

1/4* I.D. hose.

Used On: Club Car; Columbia/Harley gas, 63-UP; E-Z-Go; Jacobsert; Noland.

62509-84 62524-85 62526-85 62528-85 62530-85 62534-85 63581-74

64001-72BCARRY ALL, CHD 63-UP

Injection molded of high density A8S; designed to fit between seats of 3 and 4-wheel ColumbiafHarley golf cars.

Used On: Columbia/Harley gas and electric, 63-UP (3 and 4-wheel).

64001-72A

65231-67DMUFFLER, CHD 67-81

Replacement muffler, compatible with original configuration.

Used On: Columbia/Harley gas, 67-81.

65231-78A 65231-81 65247-79 65247-79A

65232-84MUFFLER, CHD 82-86

Replacement muffler, compatible with original configuration.

Used On: Columbia/Harley gas, 82-86. 65231-82 65233-84

65267-63GASKET, EXHAUST, CHD 63-81

Die-cut gasket made of heat resistant material. Measures approximately 2-3/4" between mount hole centers.

Used On: Columbia/Harley gas, 63-81.

65267-82GASKET, EXHAUST, CHD 82-95

"Doughnut* style, metal reinforced gasket.

Used On: Columbia/Harley 2-cycle gas, 82-95.

66323-80 BATTERY HOLD DOWN ROD, CHD

"J-hook" type, zinc plated steel threaded rod. Measures approximately 8-1/8" long. Uses P/N 15615 nut.

Used On: Columbia/Harley.

66323-80BATTERY HOLD DOWN ROD, CHD

"J-hook" type, zinc plated steel threaded rod, approximately 8-1/B" long. Uses nut, P/N 15615.

Used On: Columbia./Harley.

66453-66BATTERY HOLD DOWN ROD, CHD

"J-hook" type, zinc plated steel threaded rod. Measures approximately 10-1/4* long. Uses P/N 7676 nut.

Used On: Columbia/Harley.

66561-75BATTERY HOLD DOWN ROD, CHD

"J-hook* type, zinc plated steel threaded rod. Measures approximately 11-1/8" long. Uses P/N 15615 nul.

Used On: Columbia/Harley.

69200-89AMOTOR, 4HP, CHD, EZ, YAM

36-volt, 4 HP, 19-spline motor.

Used On: Columbia/Harley electric, 90-98; E-Z-Go electric, 88-UP INon DCS); Yamaha electric, 93-96.

70491-73BRUSH SET, MOTOR, CC. CHD. EZ

L/t r r Set of 4 brushes for GE motors. Measures f | \ approximately 1-3/8" L x 5/8" W x 1/2' L kk thick.

Used On: Club Car electric, 76-80; Columbia/Harley electric, 73-85; Cushman electric; E-Z-Go electric, 73-79; Noland; Otis, with GE motors.

714

SOLENOID, 48V-4T. SILVER

48-volts, 4-terminals, silver contacts with phenolic housing.

Used On: Club Car electric, 98-UP; Columbia/Harley electric; E-Z-Go electric; Yamaha electric, G19.

586-120111 586-120111-5B1

586-120111-2B1 586-120111-B1

71401-79

TIME DELAY. CHD

Solid state assembly replaces vacuum tube and socket assembly on 3 & 4-wheel electric cars.

Used On: Columbia/Harley electric, 3 and 4-wheel {with vacuum tube time delay system).

74875-67

71459-87SOLENOID, 36V-6T, SILVER

36-volts, 6-terminals. silver contacts with phenolic housing.

o o o t^Used ^On: Columbia/Harley electric, 87-UP;

o « o °Taylor Dunn.

°° °° 586-317111586-317111-2B1

586-317111-5B1

71461 -79SOLENOID, 6V-6T, SILVER/SHORT

6-volts, 6-terminals, silver contacts with long metal housing.

O 9 o o Used On: Columbia/Harley electric, 67-86.

So So 70-30822170-308221-2B1

70-308221-5B171476-67A

71470-87SOLENOID, 12V-4T. COPPER/LONG

12-volts, 4-terminals, copper contacts with long metal housing.

* Used On: Columbia/Harley gas, 63-UP;

O o o o Cushman; E-Z-Go gas, 79-94 (Marathon); Jacobsen.

71-1122247M12224-2B1

71-112224-5B1

71471-67ASOLENOID. 6V-4T. COPPER/SHORT

6-volts, 4-terminals, copper contacts with short metal housing.

O o o o Used ®^n: Columbia/Harley electric, 67-86. O o O o 70-108221 70-108221-2B1

70-108221-5B1

71476-66ASOLENOID, 12V-6T, SILVER/SHORT

12-volts, 6-terminals, silver contacts with short metal housing.

O o O o

70-311221 70-311221-2B1 70-311221-5B1 71476-66B

71466-65KEY, CHD 65-71

"Snoopy" style key - no grooves. (The switch this key is used on is obsolete.}

Used On: Columbia/Harley gas and electric, 65-71.

71495-72

KEY SWITCH, CHD 63-81

Switch includes P/N 71532-72 keys (2).

Used On: Columbia/Harley gas and electric, 63-81.

71506-63MICRO SWITCH, CHD 63-92

Plunger-type switch with three terminals (N. 0., N.C., COM.).

Used On: Columbia/Harley gas and electric, 63-92.

71506-67

71506-77

MICRO SWITCH, CHD 96-UP

Roller lever type micro switch with three spade connectors (C0MM1, NC2, NC3.).

Used On: Columbia/Harley 4-cycle gas, 96-UP.

71532-72KEY, CHD 72-74

Fits P/N 71495-72 ignition switch. Used On: Columbia/Harley gas, 72-74.

CONTROLLER, 24-36V, 275A, W/D

24/36-volt, 275-amp solid-state electronic speed controller. Equipped with "disable" feature which helps prevent the rear wheels from spinning during rapid acceleration.

Used On: Columbia/Harley; Cushman; E-Z-Go; Melex; Nordskog.

71700-77CONTACT BOARD ASSY, CHD 76-78

Includes: P/N 71741-77 plate and P/N 71742-75 contact screws (6).

Used On: Columbia/Harley electric, 76-78 (DE-40).

71742-75CONTACT. CHD, DE40

Round head contact stud for speed switch contact plate assembly. Solid copper, square shoulder with 5/16 -24 thread. Overall length approximately 1-1/8".

Used On: Columbia/Harley electric, 76-78 (DE-40}.

71749-75CONTACT, WIPER ARM, CHD, EZ

Movable copper alloy wiper contact with spring, lead insulation, eyelet terminal and retaining nut.

Used On: Columbia/Harley electric, 76-80 (DE-40, MG-IV); E-Z-Go electric, 68-82; Legend; Melex.

71750-75

71762-82KEY SWITCH, CHD G82-95. E90-UP

Switch includes P/N 71766-82 keys (2).

Used On: Columbia/Harloy gas, 82-95 and electric, 90-UR

71762-82A

71765-75KEY, CHD 75-82

Groove on one side only. (The switch this key is used on is obsolete.)

Used On: ColumbiaJHarley gas, 75-81; Columbia/Harley electric, 75-82 (DE-40, MG-IV).

71765-75A

71766-82

KEY, CHD 82-87 & 89-95

Fits P/N 71762-82 ignition switch.

Used On: Columbia/Harley gas and electric, 82-87 and 89-95.

71766-82A

71804-65SPRING, REV SWITCH, CHD 68-81

3-coil, copper alloy compression-type spring for use with floating contact in forward/reverse switch assembly. Measures approximately 7/16" long.

Used On: Columbia/Harley gas, 68-81.

72002-51SWITCH, BRAKE LIGHT, CHD

Screw-in type, hydraulically actuated 2-prong switch.

Used On: Columbia/Harley; Cushman; Nordskog.

72342-73WASHER, FIBER, .330. SQUARE

Square fiber insulator washer. Measures approximately .33" (8.3mm) I.D. x .89" (22.6mm) O.D.

Used On: Columbia/Harley electric; Cushman electric (GE motors); E-Z-Go electric (GE motors); Noland; Nordskog.

72367-72BRUSH SET, MOTOR, CC, CHD. EZ

Set of 4 brushes with spring hooks for GE motors. Measures approximately 1-5/8" Lx 5/8" W x 1/2" thick.

Used On: Club Car electric; Columbia/Harley electric; Cushman electric; E-Z-Go electric, 65-72; Melex; Taylor Dunn, with GE or Westinghouse Motors.

70491-63

72380-66

BEARING. 6304ZZ

Ball bearing, metal shield both sides. Measures approximately .78" (19.9mm) I.D. x 2.05" (51.9mm) O.D. x .59" (14.9mm) W.

Used On: Columbia/Harley; Cushman; E-Z-Go; Melex; Nordskog.

72381-69

BEARING, 5207WSS

Ball bearing, sealed both sides. Measures; approximately 1.372" (34.84mm) I.D. x 2.834" <71.98mm) O.D. x 1.065" <27.05mm)^ W.

Used On: Columbia/Harley; E-Z-Go; Melexr Nordskog.

BEARING CONE ONLY, LM11949

iff

High quality tapered roller bearing for 3/4'* front axles or spindles.

Used On: Club Car, 74-UP; Columbia/Harley 3W_f 63-84; Cushman; E-Z-Go 3W, 67-UP; Jacobsen; Legend; Taylor Dunn.

7308

BEARING CUP ONLY, LM11910

x High quality bearing cup (race) for 3/4" front axles or spindles.

Used On: Club Car, 74-UP;

Columbia/Harley 3W_f 63-84; Cushman; E-Z-Go 3W, 67-UP; Jacobsen; Legend; Nordskog; Otis;Taylor Dunn;Toro.

7352BRAKE SHOES, CC, CHD

Bonded lining measures approximately 1-5/16"Wx7"L (4 per set.)

Used On: Club Car 74 and earlier; Columbia/Harley; Nordskog; Otis; Taylor Dunn.

41844-66

74509-76VOLTAGE REGULATOR, CC, CHD, EZ, YA

For use with Hitachi-style starter-generator.

Used On: Club Car gas, 84-91; Columbia /Harley 2-cycle gas, late 76-84; E-Z-Go 2-cycle gas, 80-UP; Hyundai gas, 91-UP; Yamaha gas, 78-91 <G1, G2, G9).

74513-76

74511-65VOLTAGE REGULATOR, CHD 65-76

Bosch-style regulator.

Used On: Columbia/Harley gas, 65 - early 76.

74592-68

CIRCUIT BREAKER. 12V-15A, CHD 68-87

Self-resetting circuit breaker with spade type terminals. 12-volt, 15-amps.

Used On: Columbia/Harley gas, 68-87.

74601-75

RESISTOR COIL, 1ST SPEED, CHD

9-gauge wire, seven coils.

Used On: Columbia/Harley electric, 76-78 (DE-40).

74602-75

RESISTOR COIL, 2ND SPEED, CHD

7-gauge wire, five coils.

Used On: Columbia/Harley electric, 76-78 (DE-40).

74603-75

RESISTOR COIL, 3RD SPEED, CHD

6-gauge wire, four coils.

Used On: Columbia/Harley electric, 76-78 (DE-40).

DIODE, CHD 71-81

Diode for motor circuit.

Used On: ColumbiaHarley electric, 71-81 (with 'Master Drive" control system).

74857-67B

74385-67DIODE, CHD 67-83

Oiodo for speed switch or solenoids.

Used On: Columbia/Harloy electric, 67-83; Nordskog.

POT BOX, PB-6 STYLE

Curtis PB-6 style, with lever and return spring.

Used On: For most applications using Curtis controller.

7704LOCKNUT, 1/4-28, CHD 63-81

0^^_J1/4-28 nylon lock nut for primary clutch.

Used On: Columbia/Harley gas, 63-81.

SPRING SET, BRAKE SHOE, CC 74-75

Upper and lower pivot tension springs.

Used On: Club Car electric 74-75; Columbia/Harley; Nordskog; Otis; Taylor Dunn.

41832-66

7841

BUSHING, STEERING TUBE, CC, CHD, E2

Injection molded black plastic flange-type bushing. Measures approximately .76" (19.3mm) I.D. x 1.42" 136.1mm) O.D. x .49" (12.4mm) L. Flange measures approximately 1.47" (37.5mm) O.D. x .12" (3.1mm) W.

Used On: Club Car gas and electric, 76-84; Columbia/Harley; Cushman; Davis; E-Z-Go 2-cycle gas and electric, 65-70; Jacobsen; Melex; Noland; Nordskog; Otis; Pargo; Toro.

7988

NUT, JAM, 5/8"-18, CHD

5/8-18 thread zinc plated jam nut for oil bath clutch.

Used On: Columbia/Harley gas, 63-81.

8119W

NUT, WING 1/4"-20, CHD 68-83

Zinc plated 1/4-20 wing nut for metal air filter canister.

Used On: Columbia/Harley gas, 68-83.

82704-78OIL SEAL, AXLE, CHD, EZ

Seal measures approximately .88" (22.4mm| I.D. x 1.63* (41.4mm) O.D. x. .40¹' (10.2mm) W.

Used On: Columbia/Harley; Cushman; Davis; E-Z-Go; Hyundai; Jacobsen; Melex; Nordskog.

82705-78

BEARING, 60042RS (10)

Ball bearing, sealed both sides. Measures approximately .782" 09.86mm) I.D x 1.652" (41.96mm) O.D. x .471" (11.96mm) W.

Used On: Columbia/Harley; Cushman; Davis; E-Z-Go; Hyundai; Jacobsen; Melex; Nordskog;Yamaha.

82707-78A

WHEEL HUB, REAR. CHD. EZ

Keyed hub.

Used On: Columbia/Harley gas, 78-81; E-Z-Go electric, 77-81.

82837-86BUSHING, INSULATED, .335 X .227

Square plastic insulator bushing. Measures approximately .33" (8.3mm) I.D. x .55" (13.9mm) O.D. x .22" (5.5mm) thick.

Used On: Columbia/Harley electric; Cushman; Davis; E-Z-Go electric, 70-92; Noland; Nordskog (GE motors).

72352-73

82840-86COMMUTATOR STUD, CHD, EZ

Crossover stud (5/16"-18 x 1-1/2") with insulated lead wire and eyelets.

Used On: Columbia/Harley electric; Cushman; E-2-Go electric; Pargo; Taylor Dunn.

82840-86COMMUTATOR STUD. CHD, EZ

Crossover stud (5/16-18 x 1-1/2*) with insulated lead wire and eyelets.

Used On: Columbia/Harley electric; Cushman; E-Z-Go electric; Pargo; Taylor Dunn.

82842-86BRUSH SET. MOTOR, CC. CHD, E2

LLLL

Set of 4 brushes. Measures approximately 1-3/8" Lx5/8"Wx 1/2" thick.

Used On: Club Car electric; Columbia/Harley electric; Davis; E-Z-Go electric; Nordskog; Pargo; Taylor Dunn.

82918-79BRUSH SET, MOTOR, CC, CHD, YAM

f P f f Set of 4 brushes for Hitachi electric 111!motors. Measures approximately 1-1/8" Lx Ol ? m m 23/32" W x 5/8' thick.

Used On: Club Car electric, 80-84; Columbia/'Harley electric; Yamaha electric, 80-88 (G1. G2). Hitachi electric motors only.

83100-63

BEARING CUP ONLY, 15520

Race only, tapered. Measures approximately 2.250" (63.50mm) O.D.

Used On: Columbia/Harley; Cushman; E-Z-Go; Melex.

83100-73

BEARING, U199/U160L

Rear axle roller bearing assembly with! inner and outer race. Measures approximately .935" (23.74mm) I.D. x 2.81" (71.37mm) O.D. x .629" (15.97mm) W. (Width of inner race, including shoulder & .886".)

Used On: Columbia/Harley gas, 73-77, E-Z-Go; Jacobsen; Nordskog;foro.

83102-63

BEARING, 15575T

Tapered roller bearing. Measures r> approximately .879" (22.32mm} I.D.

Used On: Columbia/Harley; Cushman; E-Z-j Go; Melex; Nordskog.

S3112-63A

BEARING, 12648A

Tapered roller bearing measures ^r> approximately .872" (22.14mm) I.D.

Used On: Columbia/Harley; E-Z-Go; Melex..

83112-63RBEARING CUP ONLY, 12610.* .

Race measures approximately 1.969" (50mm) O.D. x .550" (13.98mm) W. Used with P/N 83112-63A.

Used On: Columbia/Harley; Melex.

83162-63

OIL SEAL AXLE. CHD. EZ

Rear axle seal assembly with gasket.

Used On: Col umbi a/Ha rley, Cushman; E-Z-Go; Melox.

63-77;

83163-63AOIL SEAL, REAR AXLE TUBE. CHD. EZ

Seal measures approximately .88" (22.4mm) I.D. x 1.83" (46.4mm) O.D. x .45" (11.5mm}W.

Used On: Columbia/Harley gas and electric, 63-77; E-Z-Go; Taylor Dunn.

83182-75SPRING, AMF MOTOR BRUSH, CHD

Coiled spring, approximately 1-1/2" long.

Used On: Columbia/Harley electric, 76-81 with AMF motors.

83184-75BRUSH SET, AMF MOTOR, CHD

Set of 4 brushes (with spring hooks) for AMF motors. Measures approximately 1-7/16" Lx 11/16" Wx 7/16" thick.

Used On: Columbia/Harley electric, 76-81 with AMF motor.

83268-75BRUSH HOLDER, ELECTRIC MOTOR

OInsulated brush holder assembly with

tension springs, 5/16-18 x 1-1/2" cross-over * *• • »-» f* studs, and terminal screws.

Used On: Columbia/Harley electric; Otis; (old-style GE motors).

83288-86

WASHER, FIBER, .330. ROUND

Fiber insulator washer. Measures approximately .33" (8.3mm) I.D x .84" (21.3mm) O.D. x .13' 3.3mm) thick.

Used On: Columbia/Harley electric; Cushman; Davis; E-Z-Go electric, 70-92 (GE motors); Noland; Pargo.

83289-86WASHER, FIBER, .475, ROUND

Insulator washer. Measures approximately AT (11.9mm) I.D x .87" (22.1mm) O.D. x .12" (3mm) thick.

Used On: Columbia/Harley electric with GE motors; Cushman; Davis; E-Z-Go electric, 70-92; Noland; Nordskog; Pargo (GE motors).

83260-75

8874STEEL BALL, CHD 63-81

For use in front floating flange assembly. (3 per car)

Used On: Columbia/Harley, 63-81 (aluminum flange).

90005-90

BEARING, 6O07

Ball bearing, open both sides. Measures approximately 1.375" (34.91mm) I.D. x 2.440" (61.97mm) O.D. x .550" (13.97mm> W.

Used On: Columbia/Harley; electric, 88-UP;Yamaha.

E-Z-Go

9033

BEARING SET, LM11910/LM11949

SET

Tapered roller bearing and race assembly. Measures approximately .737" (18.71mm) I.D. x 1.78" (45.21mm) CD. x .474" (12.03mm) W. (Overall width including shoulder on inner race is .655".)

Used On: Club Car; Columbia/Harley; Cushman; E-Z-Go; Jacobsen; Legend; Melex; Nordskog; Pargo;Taylor Dunn.

9034BEARING, 62042RS (10)

Ball bearing, sealed both sides. Measures approximately .78" (19.9mm) I.D. x 1.85* (47mm) O.D. x .55" (14mm) W.

Used On: Columbia/Harley; Cushman; E-Z-Go; Jacobsen; Taylor Dunn; Yamaha.

Tips: Removing both side seals will convert this 9034 bearing to a 9038.

72381-72 83269-79 9038

9035 BUSHING, GENERATOR, CHD 67-79

Measures approximately .38" (9.52mm) I.D. x .50" {12.7mm) O.D. x .38-(9.6mm) L

Used On: ColumbiayHarley gas, 67-79.

9045

BEARING SET, 67048/67010

Tapered bearing and race assembly. Measures approximately 1.247" {31.67mm) I.D. x 2.328" (59,13mm) O.D. x .650" (16.51mm) W.

Used On: Columbia/Harley gas and electric; Cushman; Jacobsen; Nordskogr Taylor Dunn.

9070 BEARING, CRANK PIN, CHD 63-81(7)

Caged needle bearing assembly for crankshaft. Measures approximately 1.08" <27.4mm) I.D. x 1.34" (34.1mm) O.D. x .71" (18mm) W.

Used On: Columbia/Harley 2-cycle gas, 63-81.

9071BEARING, NEEDLE, JH1616 (50)

Needle bearings in solid cage for use in left crankcase. Measures approximately 1.00' {25.4mm) I.D. x 1.31" (33.3mm) O.D. x .99"(25.2mm) W.

Used On: Columbia/Harley gas, 63-81.

Tips: Bearing has a "rounded* shoulder on one side to facilitate pressing into case.

9074BEARING, NEEDLE, B12100H (5)

Solid cage needle bearing assembly. Measures approximately .75" {19mm) 1.6. x 1.00' (25.4mm) O.D. x .62" (15.7mm) W.

Used On: Columbia/Harley 2-cycle gas, late 70-81.

Tips: Bearing has a "rounded" shoulder to facilitate pressing into connecting rod.

9117

BEARING SET, NV205, CHD 82-95

Measures approximately .98" (24.9mm) I.D. x 2.05' (51.9mm) O.D. x .59" (14.9mm) W.

Used On: Columbia'Harley 2-cycle gas, 82-95.

93PULLER, CLUTCH, COMET STYLE

For removing all Comet-style, 94 series clutches.

Used On: Many applications.

99448-81PARTS MANUAL, CHD 63-81 GAS

Includes parts listings and illustrated parts break-down with descriptive information and used-on criteria.

Used On: Columbia/Harley gas, 63-81.

99496-80SERVICE MANUAL, CHD 63-81 GAS

Service manual covering Harley- David son gas golf car and utilicar.

Used On: Columbia/Harley gas, 63-81.



	GASKET SET, CRANKCASE, CHD 67-95

	Die-cut gaskets, two piece set. Used On: Columbia/Harley 2-cycle gas, 67-95. 24495-82



		BRUSH HOLDER, CC 84-93 Insulated brush holder with tension springs. Used On: Club Car electric. 84-93 (2.5 HP, 10 spline motor); Columbia/Harley; E-Z-Go electric, 80-92; Legend. 83284-86



1011401BEARING SET, CC, CHD, EZ SET

	^Ba" ^bearin9^s ⁱⁿ ^a plastic cage assembly
	•**	(2), steel races (2), and a tapered steel
	•**
•*** washer. Races measure approximately <»• .875" (22.22mm> I.D. x 1.528" (38.81mm) O.D.x.272"(6.90mm>W. Used On: Club Car electric, 76-83; Columbia/Harley; Cushman; E-Z-Go; Taylor Dunn.



	1011420BRUSH SPRING, CC, CHD, YAM

		Brush tension spring. Used On: Club Car electric, 80-84; Columbia/Harley electric, 76-81; Yamaha electric, 79-91. Hitachi electric motors only. 82919-79



	1016111SPARK PLUG, BP5ES,{4,120)

	NGK BP5ES. Used On: Club Car gas FE290, 92-99; Columbia/Harley gas, 71-81; Jacobsen. 32309-6932309-69A



	FLASHER, 12 VOLT, CC 93-UP•. EA Three-prong flasher unit. Used On: Universal application where 12-volt turn signal switch is used.



	11026RETAINING RING, CHD 63-81

	C	Made of hi-tensile steel. Used On: Columbia/Harley gas, 63-81.



	11050RETAINING RING, CHD 68-81

	C	Made of hi-tensite steel. *Used On: Columbia/Hartey gas, 6881.**



		NEW_______ Solid state electronic speed controllers. (W/D) Equipped with "disable" feature which helps prevent the rear wheels from spinning during rapid acceleration. (WO/D) Not equipped with "disable" feature. P/N 24-36V, 400A, W/D15255
	OEM 73060-G01 CURTIS 1205-117



	15374WIRING KIT FOR 4 LIGHTS KIT

	Kit includes one 30-amp relay, one snap-lock connector, one illuminated 3-terminal rocker switch. Mounting hardware includes the following wire:<1) 43ⁿ black ''' with fuse holder, <1) 43" red wire. {1) 40" blue, {1} 40" green, and (2) 9-1/2" white. Used On: Universal use for light kit/ installations.



	15426	POTENTIOMETER, CURTIS 98191

		Used with Curtis pot box. Used On: Club Car; Columbia/Harley; Cushman; E-Z-Go electric, 89-94 (Marathon); Melex. 74814-97 98191



	15528 SPARK PLUG, BP6HS (4,120)

	NGK BP6HS. Used On: Columbia/Harley gas, 69-81; Yamaha 2-cycle gas (G1).



	15601SOLENOID, 12V-4T, SILVER/LONG 12-volts, 4-terminals, silver contacts with

	. long metal housing. Used On: Columbia/Harley gas; E-Z-Go O o gas, 79-94 (Marathon). O o 71-111221 7M11221-2B1 71-111221-5B1



	15759KEY SWITCH, CHD G96-UP

		Switch includes P/N 15808 keys (2). Used On: ColumbiayHarley 4-cycle gas, 96-UP. 71762-96



	15808KEY, CHD 96-UP

		Fits P/N 15759 ignition switch. Used On: Coiumbia/Harley 4-cycle gas, 96-UP. 71766-96



	15821SHOCK, FRONT & REAR, CHD 89-UP Molded rubber bushing with sleeve mount both ends. Compresses to 1V; extends to 15-7/16", measured end to end. Used On: Columbia/Harley gas and electric, 89-UP. 54514-89



		15916 Solid state electronic speed controllers. *(W/D) Equipped with "disable feature which helps prevent the rear wheels from spinning during rapid acceleration. (WO/D) Not equipped with "disable" feature. 36-48V, 350A,W/D**

	REBUILT 2 Year Warranty



		15922 Solid state electronic speed controllers. (W/D) Equipped with "disable" feature which helps prevent the rear wheels from spinning during rapid acceleration. (WO/D) Not equipped with "disable' feature. 36-48V,450A.WO/D

	REBUILT 2 far Warranty



		DUST COVER, BRAKE, CC, CHD, E2, YAM Molded neoprene cover for brake actuator. NOT FOR USE ON BENDIX BRAKE SYSTEM. Used On: Club Car gas and electric, 81-UP; ColumbiaVHarley gas and electric, 86-94; E-Z-Go gas and electric, 81-96; Yamaha gas and electric, 78-91IG1, G2, G8, G9). 17293-G1



	16524-67 1/2CYUNDER ONLY, CHD 67-81

		Machined cast iron cylinder. Used On: Columbia/Harley gas, 67-81.

	I I



	16780-63	GASKET, CYLINDER BASE, CHD 63-95

		Die-cut gasket. Used On: Columbia/Harley 2-cycle gas, 63-95. 16780-63A



	16780-63GASKET, CYLINDER BASE, CHD 63-95

		Die-cut gasket. Used On: ColumbiafHarley 2-cycle gas, 63-95. 16780-63A



	16784-82	GASKET, HEAD, CHD 63-95

	Die cut aluminum gasket. Used On: Coiumbia/Harley 2-cycle gas, 63-95.



	16920-G1BUCKLE, BAG STRAP, CHD, EZ

		Made of black high impact nylon. Used On: Columbia/Harley 84-UP; E-Z-Go 76-94 (Marathon); Legend. 53472-84



	19186-G1	BRAKE DRUM, THIN, EZ (6) Machined cast iron drum with 6.25" I.D. inner surface. For use with 24-spline axle shaft. Includes 1/2-20 studs, 4 on 4 pattern. Used On: Columbia/Harley; E-Z-Go 2-cycle gas, 82-UP; E-Z-Go electric, 82-96 and 99-UP (including Medalist/TXT); Hyundai gas and electric, 91-UP; Melex. 41844-96



	21764-G1RESISTOR. CC, CHD. EZ __ _—250-ohm solenoid resistor with two crimp- 6on eyelet terminals for speed controller X equipped cars. (Except DCS) Used On: Club Car; Columbia/Harley; E-Z-Go electric, 89-UP. 70592-87





	t i oo



	22003-63PISTON ASSEMBLY, .010, CHO 63-95 Aluminum alloy. Includes rings, piston pin and retainers. Used On: Columbia/Harley 2-cycie gas, 63-95. Tips: Before installing rings on piston, always check to insure that you have the proper end-gap clearance when rings are inserted in cylinder. Consult the manufacturer's maintenance manual for proper specifications and complete installation instructions. 22003-82





t		oo



22007-63	PISTON ASSEMBLY, .050,CHD 63-95 Aluminum alloy. Includes rings, piston pin and retainers. Used On: Columbia/Harley 2-cycie gas, 63-95. Tips: Before installing rings on piston, always check to insure that you have the proper end-gap clearance when rings are inserted in cylinder. Consult the manufacturer's maintenance manual for proper specifications and complete installation instructions.





t		oo



22008-63	PISTON ASSEMBLY, .060,CHD 63-95 Aluminum alloy. Includes rings, piston pin and retainers. Used On: Columbia/Harley 2-cycie gas, 63-95. Tips: Before installing rings on piston, always check to insure that you have the proper end-gap clearance when rings are inserted in cylinder. Consult the manufacturer's maintenance manual for proper specifications and complete installation instructions.





t		oo



22009-63	PISTON ASSEMBLY. 070,CHD 63-95 Aluminum alloy. Includes rings, piston pin and retainers. Used On: Columbia/Harley 2-cycie gas, 63-95. Tips: Before installing rings on piston, always check to insure that you have the proper end-gap clearance when rings are inserted in cylinder. Consult the manufacturer's maintenance manual for proper specifications and complete installation instructions.