1013011
BRUSH
HOLDER
Includes
brushes, springs and wires. For Hitachi starter-generators only.
Used
On: Hyundai gas. 91-UP
|
1013011
|
BRUSH
HOLDER
|
||
|
|
Includes
brushes, springs and wires. For Hitachi starter-generators only.
Used
On: Hyundai gas. 91-UP
|
||
|
106
LIGHT
KIT, RECESSED, HYUN 90-UPDiscontinued
Includes
a pair of rectangular halogen headlights, amber front running lights, red
rear tail lights, wiring, connectors, switch and complete installation
instructions.
Molded
of black, high-impact ABS plastic. Used
On: Hyundai gas and electric, 90-UP.
|
||
|
II
i
it i«<*"" \ \\\\\\\
  |
||
|
106ABEZEL
& HEADLIGHT, HYUN 90-UP
Includes
a pair of rectangular halogen headlights with left and right bezels. Does
not include wiring harness, taillights, or connectors.
|
||
|
1347
|
BELIGENERATOR,
HYU 91-UP (10)
|
||
|
Reinforced
belt. Measures approximately 1/2"Wx33'O.D.
Used
On: Hyundai gas, 91-UP.
|
|||
|
1348
|
BELT,DRIVE,
HYUNDAI 91-UP
|
||
 |
Reinforced
belt. Measures approximately 15/16" Wx 47-3/4" O.D.
Used
On: Hyundai gas, 91-UP.
|
||
|
15200FOOT
SWITCH. CURTIS FP2
|
|||
 |
Eliminates
adapting existing throttle pedal to work with pot box.
Used
On: Universal assembly for use with electronic
speed controllers.
|
||
|
15485
|
DRIVE
END COVER
|
||
 |
Replacement
for Hitachi style starter-generator.
Used
On: Hyundai
|
||
|
15539OIL
SEALFRONT SPINDLE
|
|||
 |
Seal
measures approximately 1.130" (28.70mm)
I.D. x 1.860" <47.24mm> O.D. x .270*
<6.85mm> thick.
Used
On: Hyundai gas and electric, 91-UP
|
||
|
15560BATTERY
HOLD DOWN ROD.HYU ELE
"J-hook"
type, zinc plated steel threaded crod,
approximately 11-3/4" long (6mm
threads}.
Uses nut, P/N 252N.
Used
On: Hyundai electric.
|
||
|
15561BATTERY
HOLD DOWN ROD.HYU GAS
"J-hook"
type, zinc plated steel threaded ^
rod, approximately 9-3/8" long (6mm
threads!.
Uses nut, P/N 252N.
Used
On: Hyundai gas.
|
||
|
17290-G1SPRING.BRAKE
SHOE
|
||
|
Seventeen-coil
spring. Measures approximately 3-3/4" long.
Used
On:
Hyundai
gas and electric, 90-UP
|
||
|
226ECPREFILTERfG1/G2/G8/G9/G14|180)
|
|||
 |
Foam
outer "prefilter" slides over air filter element. Provides extra filtration,
extends engine life and protects inner filter. Can be cleaned, re-oiled
and re-used.
Used
On: Hyundai gas 91-UP
|
||
|
2123
|
FILTER.AIR
|
||
 |
Oil
impregnated paper element, with perforated inner and outer metal encasement,
metal end caps, O-ring top seal and cushion insert on bottom.
Used
On: Hyundai gas, 91-UP
|
||
|
1012288
|
CLUTCH,
DRIVEN
|
||
 |
Salsbury-style
clutch.
Used
On: Hyundai gas, 91-96 (HGG-1)
|
||
|
23359G1SPRING.BRAKE
SHOE
|
||
|
Fourteen-coil
spring. Measures approximately 3-3/16" long. (1-7/16* hook on one end,
3/4" on other)
Used
On:
Hyundai
gas and electric, 90-UP
|
||
|
BEARING,
6206
|
|||
 |
Ball
bearing, open both sides. Measures approximately
2.45" {62.2mm> O.D. x 1.16"
(29.8mm) I.D. x .63' (16mm) W.
|
||
|
25523G4
|
SPARK
PLUG.BPR5ES
|
||
|
NGK
BPR5ES.
Used
On:
Hyundai.
|
|||
|
26928-G01
|
INPUT
SHAFT, 22 TOOTH W/BRNGS
|
||
 |
22-tooth
input shaft with bearings for trans-axle.
Used
On: Hyundai (with 22 tooth gears)
|
||
|
26928-G01
|
INPUT
SHAFT, 22 TOOTH W/BRNGS
|
||
 |
22-tooth
input shaft with bearings for trans-axle.
Used
On: Hyundai (with 22 tooth gears)
|
||
|
2FP-003181
Axle
nut
 |
||
|
__.
All Hyundai
|
||
|
30110-77
|
GENERATOR
END CARW/BRUSHES
|
||
 |
Replacement
for Hitachi style starter-generator.
Used
On: Hyundai gas, 91-UP (HGG1)
|
||
|
30443-77BRUSH
SET, GEN,
|
||||
|
L
|
 |
Set
ot 4 Drusnes for use in Hitachi style starter-generator. Measures approximately 1"Lx
17/32" W x 7/32' thick.
Used
On: Hyundai gas, 91-UP
|
||
|
30860-77ARMATURE,STARTER
|
||
|
Armature
only for Hitachi style starter-generator.
Used
On: Hyundai gas, 91-UP
|
||
|
335ABRAKE
SHOES.SET
OF 4
|
||
|
y
V
Bonded lining
measures
«
^approximately
1-3/16" wide. Rear lining
j is
approximately 6-1/8" long; front is
*-
*" approximately 6" long.
Used
On:
Hyundai
gas and electric (HGB1, HGB1A, HGG1) " ' "" "
|
||
|
BRAKE
SHOE SHORT.FRONT.EA
Bondedliningmeasures
approximately
1-3/16" W x 6" L
Used
On:
Hyundai
gas and electric, 91-UP
|
||
|
349
HYUNDAI KING PIN KIT, HYUN
|
||
|
Kit
includes: king pins (2), lower metal bushings
(2) and upper metal bushings (2).
Used
On: Hyundai gas and electric, 90-96;
|
||
|
292
|
BEARING,
62032RS
|
||
 |
Ball
bearing, sealed both sides. Measures approximately
.66" {16.8mm) I.D. x 1.57" (39.9mm)
O.D. x .47* (11.9mm) W.
|
||
|
15530BEARING,
STEERING SHAFT, 30203
|
||||
 |
o
|
Tapered
race and roller bearing. Measures approximately .66" (16.8mm) I.D. x 1.57"
<39.9mm> O.D. x .53" (13.6mm) W.
Used
On: Hyundai gas and electric, 90-UP
|
||
|
30149-67
|
BEARING,
62022RS
(10)
|
||
 |
Ball
bearing, sealed both sides. Measures approximately .59' (14.9mm) I.D. x
1.38* (35mm) O.D. x .43" (10.9mm) W.
|
||
|
30151-69BEARING,
63032RS
|
|||
 |
Ball
bearing, sealed both sides. Measures approximately
.67" (17mm) I.D. x 1.85" (46.9mm)
O.D. x .55" (13.9mm) W.
|
||
|
3870-HYUNDAI
BEARING, 60042RS
Hyundai
axle bearing and other applications
|
|||
 |
Ball
bearing, sealed both sides. Measures approximately .78" (19.8mm) I.D x
1.65* (41.9mm) O.D. x .47" (11.9mm) W.
|
||
|
BRAKE
SHOE LONG.REAR.EA
|
||
|
Bondedliningmeasures
approximately
1-3/16'W x 5-15/16" L
Used
On: Hyundai gas and electric
|
||
|
19186-G1BRAKE
DRUM.THIN,
|
|||
 |
Cast
iron drum with precision machined
6.25" I.D. inner surface. For use
with 24-spline axle shaft. Includes 1/2"-20,
4 on 4 pattern.
Used
On:
Hyundai
gas and electric, 91-UP
|
||
|
16917-G1BRUSH
SET, MOTOR, HYU
|
|||
 |
Set
of 4 brushes {with studs) for GE motors.
Measures approximately 1-7/16" L x
5/8" W, 1/2" thick.
Used
On: Hyundai electric
|
||
|
16067FUEL
PUMP, HYUNDAI
|
||
|
Mikuni
pump, aluminum housing. Used
On: HYUNDAI
|
||
|
61254-89
|
GAS
CAP,
Direct
replacement.
Used
On: Hyundai gas, 91-UR
|
||
|
702
|
KEY,
HYUNDAI. 90-UP
|
||
 |
For
Hyundai ignition switch.
Used
On: Hyundai gas and electric, 90-UR
|
||
|
74509-76
|
VOLTAGE
REGULATOR
|
||
 |
For
use with Hitachi style starter-generator. Used
On: Hyundai gas, 91- UP
|
||
|
751POT
BOX, PB-6 STYLE
|
|||
 |
Curtis
PB-6 style, with lever and return spring.
Used
On: For most applications using Curtis
controller.
|
||
|
811STARTER
GENERATOR
|
|||
 |
Hitachi
style. (Pulley not included!) Used On: Hyundai gas, 90-UP (HGG1)
|
||
|
3936-HYUNDAI
|
OIL
SEAL.AXLE
|
||
 |
Oil
seal for Dana style differentials. Used On: Hyundai
|
||
|
839
|
BATTERY
HOLD DOWN
|
||
|
Vinyl
dipped to prevent battery corrosion, inner core made from solid steel.
Used
On: Hyundai electric, 91-UP (HGB-1. HGB-1A).
|
|||
|
846KING
PIN, HYUN.
|
||
|
Top
quality machined steel, zinc plated for protection. Measures approximately
.590" <14.98mm) O.D. x 4.625* (117.46mm) L
Used
On: Hyundai gas and electric, 90-UP;
|
||
|
16046-HSTOP
SWITCH
|
|||
 |
Accelerator
actuated plunger-type switch with plastic housing, rubber moisture boot
and two plastic adjustment nuts. Has two lead
wires with male bullet-type connectors.
Used
on some Hyundai carts. This part is non returnable
|
||
|
1012834
|
BUSHING,DRIVEN
CLUTCH
|
||
 |
Fiber-glide
type bushing for driven sheave. Measures approximately 1.536" 139.01 mm)
O.D. x 1.377' (34.97mm) I.D. x 1.5" <38.10mm) L
Used
On: Hyundai gas, 91-96.
|
||
|
Electric
Cart
|
||
|
M
|
||
|
Hyundai
LH axle shaft
|
||
|
Use
bearing 3870-HYUNDAI & seal 3936-HYUNDAI ordered
separately
|
||
|
I
|
||
|
10$
|
||
|
GB1-353031
Hyundai
electric cart RH brake cable
Picture
of cable may not look like the
one being replaced.
|
||
|
GB1
-353032 Hyundai electric cart
LH brake cable
Picture
of cable may not look like the
one being replaced.
|
||
|
GB1-808001
29
30
28
23
12
|
||
|
INCLUDES
1-33
|
||
|
Trans
 |
||
|
GC1-604110COVER,
BOTTOM
WHITE, HYUN 90-UP
|
|||
 |
Molded
one-piece white heavy-duty vinyl cover. Matches OEM pattern.
Used
On: Hyundai gas and electric 90-UP.
|
||
|
GC1-604150
|
COVER.
BACK WHITE, HYUN 90-UP
|
||
 |
Molded
one-piece white heavy-duty vinyl cover.
Matches OEM pattern.
Used
On: Hyundai gas and electric 90-UR
|
||
|
ONLY
ONE liEFT
|
|||
|
<&>
|
RODUCTION
|
||
 |
|||
|
ONLY
ONE LEFT
|
|||
|
GG1-111000
|
||
|
Includes
 |
||
|
GG1-111040
|
|||
 |
 |
||
|
GG1-111080
|
||
 |
||
|
GG1-111160
|
||
 |
||
|
Hyundai
crank case seal
|
||
|
o
|
||
|
«#?
|
||
|
PISTON
PIN,
Made
of high temperature steel. Used On: Hyundai gas engine
|
||
 |
PISTON
PIN CLIP,
Wire-type
retaining ring for piston pin. Used On: Hyundai gas engine
|
||
|
GG1-112090
 |
||
 |
||
|
Plate
Oil Splasher
|
||
 |
 |
a
|
||
|
V
|
||||
|
GG1-119010
DISCONITUED
|
||
|
DISCONITUED
|
||
|
DISCONITUED BATTERY
IGNITER
|
||
 |
||
li'W^f*
|
TRANSAXLE
ASS'Y (NEW STYLE) •?•??«
#A004331 AND ABOVE
INCLUDESEVERYTHNGSHOWN
|
|||
|
^j&~,*--^
|
 |
|||
|
M
|
Gas
Cart
Hyundai
LH axle shaft
Use
bearing 3870-HYUNDAI ordered
separately
|
||
|
M
|
Gas
Cart
Hyundai
RH axle shaft
Use
bearing 3870-HYUNDAI ordered
separately
|
||
|
Picture
not exact
|
||
|
M
|
||
|
GG1-211730
OLD TYPE
|
^
if*
|
||
 |
|||
|
^ *^J
|
|||
 |
|||
|
GG1
-211732 NEW TYPE
|
^
if*
|
||
 |
|||
|
^ *^J
|
|||
 |
|||
 |
||