List of parts for Yamaha golf carts

1010126BOLT, SHOULDER, LONG. CC 80-92

3/8-16 x 4* bolt fastens upper end of "A" plate to the shock mount weldment.

Used On: Club Car gas and electric 80-92.

1011420BRUSH SPRING, CC, CHD, YAM

Brush tension spring.

Used On: Club Car electric, 80-84; Columbia/Harley electric, 76-81; Yamaha electric, 79-91. Hitachi electric motors only.

J14-81813-10

1011603BAG WELL LINER, CC 81-98, YAM G1

Die cut black rubber mat with textured finish and ten punched mount holes. Conforms to shape of bag well and protects body from golf bags.

Used On: Club Car gas and electric, 81-98; Yamaha 2-cycle gas and electric, 79-89 (G1).

1013011

BRUSH HOLDER

Includes brushes, springs and wires. For Hitachi starter-generators only.

Used On: Hyundai gas. 91-UP

1017946BRUSH SET, MOTOR, CC 36^48V, YAM 48V

Set of 4 brushes. Measures approximately 1-378" L x 9/16' W x 7/16" thick.

Used On: Club Car 36 and 48-volt electric, 94-UP; Melex; Yamaha 48-voIt electric

JG6-H1801-00 JH7-H1801-00

1017947INSULATOR KIT, CC. CHD, EZ, YAM

¹ ^M ^ Includes two injection molded insulators with dual hex-head holes, two oval fiber insulators with dual .525" I.D holes and hardware.

Used On: Club Car electric. 94-UP; Columbia/Harley electric (new style GE motors); E-Z-Go electric (new style GE motors); Yamaha electric, 90-UP <G8, G9, G14, G16).

105

LIGHT KIT, RECESSED, YAM G14-G22

Includes a pair of rectangular halogen headlights, amber front running lights, red rear tail lights, wiring, connectors, switch and complete installation instructions.

Molded of black, high-impact ABS plastic.

Used On: Yamaha 4-cycle gas and electric, 95-UP (G14, G16, G19, G20, G21, G22).

'"'Mitiiimu»

105A

BEZEL & HEADLIGHT, YAM G14-G22

Includes a pair of rectangular halogen headlights with left and right bezels. Does NOT include wiring harness, taillights, or connectors.

BEZEL, DRIVER, YAM G14-G22

105R

BEZEL, PASS, YAM G14G22

106

LIGHT KIT, RECESSED, HYUN 90-UP

Includes a pair of rectangular halogen headlights, amber front running lights, red rear tail lights, wiring, connectors, switch and complete installation instructions.

Molded of black, high-impact ABS plastic. Used On: Hyundai gas and electric, 90-UP.

II i it i«<*"" \ \\\\\\\

106ABEZEL & HEADLIGHT, HYUN 90-UP

Includes a pair of rectangular halogen headlights with left and right bezels. Does not include wiring harness, taillights, or connectors.

107

LIGHT KIT, RECESSED, YAM G2/G9

Includes a pair of rectangular halogen headlights, amber front running lights, red rear tail lights, wiring, connectors, switch and complete installation instructions.

Molded of black, high-impact ABS plastic.

Used On: Yamaha 4-cycle gas and electric, 85-94 (G2, G9).

***

fcfcfct

10V-13613-01REED VALVE,YAM G 1,78-81,83-89

Stainless steel, split leaf. 2 required per car. For 1982 models we can special order P/N 345-13613-70.

Used On: Yamaha 2-cycle gas, 78-81 and 83-89 IG1).

1347

BELIGENERATOR, HYU 91-UP (10)

Reinforced belt. Measures approximately 1/2"Wx33'O.D.

Used On: Hyundai gas, 91-UP.

1348

BELT,DRIVE, HYUNDAI 91-UP

Reinforced belt. Measures approximately 15/16" Wx 47-3/4" O.D.

Used On: Hyundai gas, 91-UP.

15088MOTOR, 2.5HP, EZ 88-UP NON DCS

36-volt. 2.5 HP, 19-spline motor.

Used On: E-Z-Go electric, 88-UP (Non DCS); Melex; Yamaha.

JH7-H1890-10

15197SPUNE BUMPER, GE MOTOR

Neoprene spline bumpor. Measures approximately .77" 09.5mm) O.D. x .35" (8.8mm) thick.

Used On: Columbia Harfey electric (new style GE motors); E-Z-Go electric. 89-UP (GE and Advance motors); Yamaha electric. 90-UP (GE motors).

JH7H1829-00

15200FOOT SWITCH. CURTIS FP2

Eliminates adapting existing throttle pedal to work with pot box.

Used On: Universal assembly for use with electronic speed controllers.

15203MOTOR, 36-48V, 4HP, 10SP, CC, YAM

36/48-volt, 4 HP, 10-spline motor.

Used On: Club Car electric, 84-UP; Yamaha electric, 89-93 1/2.

15432SPARK PLUG. B5ES {4,120)

NGK B5ES.

Used On: Yamaha 4-cycle gas, 85-93 (G2).

NGK-B5ESO-00

15433 KEY SWITCH, YAM G11/16/20/21/22

Black plastic housing with P/N 867 keys (2), wire harness, plug-in connectors and rubber seal boot.

Used On: Yamaha 4-cycle gas and electric, 96-UP {Gil, G16, G20, G21, G22).

JN8-82510-00 JN8-82510-01

15434BAG STRAP, YAM G16-G19

Black nylon weave strap. Measures approximately 1-15/16" W x 65" L

Used On: Yamaha 4-cycle gas and electric, 96-UP1G16. G19).

JF2-K8355-00JN6-K8355-00

15437ARMATURE, STARTER, EZ, YAM G16

Armature only.

Used On: E-Z-Go 4-cycle gas. 91-UP; Yamaha 4-cycle gas, 96-UP (G16).

JN3-H1150-00

15438STARTER GENERATOR, YAM G16-G21

Hitachi-style starter-generator.

Used On: Yamaha 4-cycle gas, 96-UP (G16, G20, G21).

JN6-H110000

15439

CABLE, BRAKE. DRIVER, YAM G16

Flexible metal vinyl covered housing with stranded steel inner cable. Approximate measurements: Housing: 36-1/2"; Cable, including clevis, 43-1/4". An extra 32" abrasion protection sheath is positioned over the housing, at the split clevis end.

Used On: Yamaha 4-cycle gas, 96-UP (G16).

JN6-F6341-00

CABLE, CHOKE, SEAT MOUNT, YAM G16

Flexible metal vinyl covered housing with stranded stainless-steel inner cable, knob and knurled retaining nut. Overall cable length is approximately 11-3/4", measured from base of knob to end of clevis. Housing length is approximately 9-1/8". An additional 2-5/8" long outer rubber protection sleeve is crimped to housing approximately 1-7/8" from clevis end. Mounts below seat.

Used On: Yamaha 4-cycle gas, 96-UP (G16) JN6-F6331-00

15441DUST COVER, YAM G16-G21

Rubber cover snaps into wheel hub to keep dirt & grime away from wheel bearings.

Used On: Yamaha 4-cycle gas and electric, 96-UPIG16, G19, G20_rG21).

JN6-F5118-00

15442MUFFLER, YAM G16

Replacement muffler, compatible with original configuration. Includes header pipe.

Used On: Yamaha 4-cycle gas, 96-UP (G16).

JN6-E4710-00

15443

COIL, IGNITION, YAM G16

For use with 12-volt CDI ignition systems. Used On: Yamaha 4-cycle gas, 96-UP

JN6-85640-00

15444

GASKET, CRANKCASE, YAM G11-G22

Die cut gasket.

Used On: Yamaha 4-cycle gas, 96-UP (Gil, G16, G20, G21.G22).

JN6-15451-00 JN6-15451-09

JN6-15451-O2

15445

VALVE, EXHAUST, YAM G11/G16-G22

Used On: Yamaha 4-cycie gas, 96-UP (G11, G16, G20, G21_rG22).

JN6-12121-00

15446VALVE, INTAKE, YAM G11/G16-G22

Uses P/N 5H0-12119-00 valve seal ( NOT included).

Used On: Yamaha 4-cycle gas, 96-UP (Gil, G16,G20_rG21,G22).

JN6-12111-00 JN6-12111-01

PISTON ASSEMBLY,.50MM,YAM G16-G22

Aluminum alloy. Includes rings, piston pin

and retainers.

Used On: Yamaha 4-cycle gas, 96-UP (G16, G20, G21.G22).

Tips: Before installing rings on piston, always check to insure that you have the proper end-gap clearance when rings are inserted in cylinder. Consult the manufacturer's maintenance manual for proper specifications and complete installation instructions.

JN6-11636-00

PISTON ASSEMBLY,.25MM,YAM G16-G22

Aluminum alloy. Includes rings, piston pin and retainers.

Used On: Yamaha 4-cycle gas, 96-UP (G16, G20, G21.G22).

PISTON ASSEMBLY,STD,YAM G16G22

Aluminum alloy. Includes rings, piston pin and retainers.

Used On: Yamaha 4-cycle gas, 96-UP (G16, G20, G21.G22).

JN6-11631-00

RING SET,.50MM,YAM G16-G22

Five ring set.

Used On: Yamaha 4-cycle gas, 96-UP (G16, G20, G21, G22).

RING SET..25MM.YAM G16-G22

Five ring set.

Used On: Yamaha 4-cycle gas, 96-UP (G16 G20, G21, G22).

Tips: Before installing rings on piston always check to insure that you have the proper end-gap clearance when rings arc inserted in cylinder. Consult the manufacturer's maintenance manual foi proper specifications and complete installation instructions.

JN6-11610-10

RING SET, STD, YAM G16-G22

Five ring set.

Used On: Yamaha 4-cycle gas, 96-UP (G16, G20, G21, G22).

JN6-11610-00

15453

GASKET, HEAD, YAM G16G22

Die-stamped aluminum "crush-type" gasket.

Used On: Yamaha 4-cycle gas. 96-UP (G16, G20, G21, G22).

JN6-11181-00

15454

GASKET, BREATHER, YAM G11/G16

Die-cut gasket.

Used On; Yamaha 4-cycle gas, 96-UP (Gil, G16).

JN6-11169-00

15456F&R SWITCH, YAM G14-G16

Complete switch, less handle.

Used On: Yamaha 36-volt electric, 94-UP (G14,G16).

JN4-82917-00

15458BUMPER, FRONT, YAM G14-G21

Rotational-molded, black bumper assembly, including nut inserts. Measures approximately 7-1/2" H x 18-1/8" L

Used On: Yamaha 4-cycle gas and electric, 95-UP (G14, G16, G19, G20. G21).

JN3-K7510-00 JN3-K7510-02

15459WHEEL HUB, REAR, YAM G8-G21

Splined hub, machined to OEM

specifications.

Used On: Yamaha 4-cycle gas and electric, 92-02 (G8, G9. G14, G16, G19 G20, G21).

JH7-G6514-00JN3-G6514-00

15460F&R HANDLE. YAM G11-G16

Injection molded handle.

Used On: Yamaha gas and electric, 94-UP (G11.G14.G16).

JN3-G6381-00

15461 MUFFLER. YAM G2G14

Replacement muffler, compatible with original configuration. Includes header pipe.

Used On: Yamaha 4-cycle gas, 85-95 IG2, G8, G9, G14).

J38-14710-00J38-14710-01

J40-14710-01J55-E4710-00

J55-E4710-01JN3-E4710-00

15462

GENERATOR END CAP, W/ BRUSHES

Replacement for Hitachi-style starter-generator.

Used On: Yamaha 4-cycle gas, 96-UP (G16).

JN3-8116600

15464WHEEL HUB, FRONT, YAM G2-G21

Aluminum front hub. Bearings and seals NOT included. Uses P/N 15539 oil seal ID, P/N 9034 bearing ID, P/N 267 bearing (1).

Used On: Yamaha 4-cycle gas and electric, 85-UP (G2, G8, G9, G14, G16, G19, G20, G21).

J38-W2511-00 JG5-WF511-00

15465 BUMPER, REAR, YAM G2/G9

One piece steel bumper is powder coated and includes mounting stays.

Used On: Yamaha 4-cycle gas and electric, 84-94 (G2, G9).

J38-78107-00-04JG5-K8107-00

15466BATTERY HOLD DOWN, G14-G19

Extruded, black plastic hold down with one 1/4" holes. Measures approximately 6' long.

Used On: Yamaha electric, 95-UP (G14, G16, G19).

JF3-H2136-00

CABLE. BRAKE. PASS, YAM G8/14/16/19

Flexible metal vinyl covered housing with stranded steel inner cable. Approximate measurements: Housing: 39"; Cable, including clevis: 52". An extra 12" abrasion protection sheath is positioned over the housing on long rubber boot end.

Used On: Yamaha 4-cycle gas and electric, 90-UP1G8, G14,G16, G19).

JF2-F6351-00

JF2-F635M0

CABLE, BRAKE, DRIVER, YAM

Flexible metal vinyl covered housing with stranded steel inner cable. Approximate measurements: Housing: 36-3/8"; Cable, including clevis: 42-15'16". An extra 31-3^4" abrasion protection sheath is positioned over the housing, starting at the split clevis end.

Used On: Yamaha 4-cycle gas, 90-95 (G8, G14) and electric, 90-UP (G8, G14, G16. G19).

JF2-F6341-00

JF2-F6341-10

15469

CABLE, CHOKE, DASH, YAM G8/14/16

Flexible metal vinyl covered housing with stranded stainless-steel inner cable, knob and knurled retaining nut. Overall cable length is approximately 87", measured from base of knob to end of clevis. Housing length is approximately 84-7/8". An additional 21' long outer rubber protection sleeve is crimped to clevis-end of housing. Dash mounted.

Used On: Yamaha 4-cycle gas, 90-UP (G8, GK G16).

JF2-F6331-09

————? uniiM «> mm*-.___________-

CABLE, ACCELERATOR, YAM G8

Flexible metal vinyl covered housing with stranded steel inner cable. Approximate measurements: Housing: 62-3/4"; Cable: 66-1/2". An extra 15-1/2" abrasion protection sheath is positioned over the housing at clevis end.

Used On: Yamaha 4-cycle gas, 90-94 (G8). JF2-F631100 JF2-F6311-01

15471BRUSH HOLDER, EZ 4CYCLE, YAM G16

Includes brushes, springs and wires. For Hitachi starter-generators only.

Used On: E-Z-Go 4-cycle gas, 91-UP; Yamaha gas, 96-UP(G16).

JN3-81119-00

15472BALL HOLDER, YAM G2/G8/G9

hxtruded black vinyl holder with two drilled mount holes. Measures approximately 6-3/8" L.

Used On: Yamaha 4-cycle gas and electric, 85-94 <G2, G8, G9).

J38-7835A-01J55-K835A-00

15475BUMPER TRIM, YAM G2

Black vinyl trim strip slides on rear bumper.

Used On: Yamaha 4-cycle gas and electric, 85-91 (G2).

J38-78172-00J55-K8172-00

CABLE, BRAKE, PASS, YAM G2/G9

Flexible metal vinyl covered housing with stranded steel inner cable. Approximate measurements: Housing: 39-1/4"; Cable, including clevis: 51-1/2". An extra 12" abrasion protection sheath is positioned over the housing, at the long boot end.

Used On: Yamaha 4-cycle gas, 85-94 (G2, G9).

J38-26351 -00 J55-F6351-01

J55-F6351-00

CABLE, BRAKE, DRIVER, YAM G2/G9

Flexible metal vinyl covered housing with stranded steel inner cable. Approximate measurements: Housing: 31-1/4"; Cable, including clevis: 38-1/2". An extra 12" abrasion protection sheath is positioned over the housing.

Used On: Yamaha 4-cycle gas, 85-94 (G2, G9).

J38-26341-00 J55-F6341-01

J55-F6341-00

RESISTOR COIL, YAM G1/G2/G9

5-gauge wire, twenty-one coils.

Used On: Yamaha electric, 78-92 (G1, G2. G9I.

J14-8537000 J14-85370-02

J14-85371-00J14-85371 01

J51-85370-00 J56-85370-00

15482

SOLENOID. 36V-4T, SILVER

36-volts, 4-terminals, silver contacts with phenolic housing.

Used On: Yamaha electric, 85-89 (G2). J38-81950-09-00 J41-81950-00

15483 COIL, IGNITION, YAM G2/G9/G11

For use with 12-volt CDI ignition systems.

Used On: Yamaha 4-cycle gas, 85-94 (G2_fG9, G11).

J38-82310-20

15484FIELD COIL, GEN, YAM G2-G14

Field coil assembly for Hitachi-style starter-generators.

Used On: Yamaha 4-cyc!e gas, 85-95 (G2_rG8, G9, Gil, G14).

J38-81160-10

15485

DRIVE END COVER

Replacement for Hitachi style starter-generator.

Used On: Hyundai

15486BUSHING, STEERING COLUMN, YAM G2-G9

Injection molded black plastic flange-type bushing. ^%

Used On: Yamaha 4-cycle gas and electric 85-94 (G2, G8, G9).

J38-23814-00

15487

DUST SEAL, LOWER, YAM G2-G21

King pin dust seal, lower.

Used On: Yamaha 4-cycle gas and electric, 85-02 (G2, G8, G9, Gil. G14, G16, G19, G20,G21).

J38-23528-00

15488DUST SEAL, UPPER. YAM G2-G21

King pin dust seal, upper.

Used On: Yamaha 4-cycle gas and electric, 85-02 (G2, G8, G9, G11, G14, G16, G19, G20, G21).

J38-23527-00

15489GASKET, FOAM, AIR CLEANER, YAM G1

Foam air filter gasket. Measures approximately 1-3/16" I.D. x 1-9/16" O.D. x 3/16' thick.

Used On: Yamaha 2-cycle gas, 78-89 (G1). J10-14416-00J38-1441600

15490GASKET, INTAKE, YAM G2-G14

Die-cut gasket. Measures approximately 2' between mount hole centers.

Used On: Yamaha 4-cycle gas. 85-95 (G2, G8, G9, G11,G14).

J38-13556-00J38-13556-01

PISTON ASSEMBLY, STD, G2/G8/G9

Aluminum alloy. Includes rings, piston pin and retainers.

Used On: Yamaha 4-cycle gas, 85-94 (G2, G8, G9).

99999-01891J38-11631-00

J38-11631-01

RING SET,.50MM,YAM G2/G8/G9

Four ring set.

Used On: Yamaha 4-cycle gas, 85-94 (G2, G8, G9).

Tips: Before installing rings on piston, always check to insure that you have the proper end-gap clearance when rings are inserted in cylinder. Consult the manufacturer's maintenance manual for proper specifications and complete installation instructions.

J38-11610-20

RING SET,.25MM,YAM G2/G8/G9

Four ring set.

Used On: Yamaha 4-cycle gas, 85-94 (G2, G8, G9).

J38-11610-10

RING SET, STD, YAM G2/G8/G9

Four ring set.

Used On: Yamaha 4-cycle gas, 85-94 (G2, G8, G9).

J38-11610-00

15497KEY SWITCH, YAM G1 ELECTRIC

Black plastic housing with P/N 224SK keys {2), wire harness, plug-in connectors and rubber seal boot.

Used On: Yamaha electric, 78-89 <G1). J14-82508-00 J22-82508-00

15500BUMPER TRIM, 82-UP, YAM G1

Extruded black vinyl bumper trim. Measures 2-1/4" W x 38* L.

Used On: Yamaha 2-cycle gas and electric, 82-UP (G1).

J17-78162-00

15501TRIM. FLOOR MAT, YAM G1

Black vinyl floor mat retaining trim. Measures approximately 36" long.

Used On: Yamaha 2-cycle gas and electric, 79-89 (G1).

J17-77165-00

15502BRAKE PEDAL PAD, YAM 82-UP

Stop pad is made of masticated rubber. Measures approximately 1/4" (6.4mm) x 1-1/4" <31.6mm) x 1-7/8* (46.9mm).

Used On: Yamaha gas and electric, 82-UP. J17-27245-00

15503DUST COVER, YAM 82-95

Plastic cover snaps into wheel hub to keep dirt & grime away from wheel bearings.

Used On: Yamaha gas and electric, 82-95 (G1, G2, G8, G9, G14).

J17-25118-00

15504CONTACT, STATIONARY, YAM G1 /2/9

Copper contact block mounts on wiper board. 5 required per car.

Used On: Taylor Dunn; Yamaha electric, 82-92 (G1,G2, G9>.

J14-86162-00

15505

WIPER ARM BOARD, YAM 79-81

Fiber board for mounting movable contact. Used On: Yamaha electric, 79-81. J14-8615400

15508

BAG WELL MAT, YAM 78-81

Die-cut black rubber mat with textured finish to place over metal pan in bag well.

Used On: Yamaha 2-cycle gas and electric, 78-81.

J10-78241-00

15509 BUMPER TRIM, 78-81, YAM G1

Molded black vinyl bumper trim. Measures approximately 2-3/16" W x 30-3/4" L

Used On: Yamaha 2-cycle gas and electric, 78-81 <G1).

J10-78162-00J10-78162-01

PAD. FRONT COWL PASS, YAM G1

Injection molded black vinyl pad with reinforcing stiffening ribs and drain hole. Measures approximately 4" at widest point x 10" L

Used On: Yamaha 2-cycle gas and electric, 78-89 (G11.

J10-77152-01

15512PAD, FRONT COWL, DRIVER, YAM G1

Injection molded black vinyl pad with reinforcing stiffening ribs and drain hole. Measures approximately 4" at widest point x 10" L

Used On: Yamaha 2-cycle gas and electric, 78-89 (Gil.

J10-77151-01

15513BRAKE PEDAL PAD, YAM 79-81

Stop pad made of masticated rubber. Measures approximately 1/8* x 1-9/16" x 1-15/16*.

Used On: Yamaha 2-cycle gas and electric, 79-81.

J10-27245-00

15514GASKET, GAS CAP, YAM G1-G9

Die-cut neoprene gasket. Measures approximately 1-1/4" I.D. x 1-3/4" O.D. x 3/32" thick.

Used On: Yamaha gas. 79-94 (G1, G2. G8, G9).

8F3-24564-00J10-24612-00

15517GROMMET, VENT, YAM

Use with P/N 836 release valve.

Used On: Yamaha gas, 85-94 (Gi, G2, G8, G9>.

J10-21773-00

PISTON ASSEMBLY, 1.0MM,YAM G1

Used On: Yamaha 2-cycle gas, 78-89 (G1). J10-11638-00

J10-11631-00

PISTON ASSEMBLY..75MM, YAM G1

Used On: Yamaha 2-cycle gas, 78-89 <G1). J10-11637-00

J10-11631-00

RING SET, 1.0MM/YAM G1

Two chromed ring set.

Used On: Yamaha 2-cycle gas, 78-89 (G1).

J10-11610-40

RING SET,.75MM, YAM G1

Two chromed ring set.

Used On: Yamaha 2-cycle gas, 78-89 (G1).

J10-11610-30

15525IGNITOR. YAM G9 90-94

Solid state unit includes snap in plug. Used On: Yamaha 4-cycle gas, 90-94 (G9).

99999-02368JG5-82305-00

JG5-82305-01JG5-82305-02

15528SPARK PLUG, BP6HS (4,120)

NGK BP6HS.

Used On: Columbia/Harley gas, 69-81; Yamaha 2-cycle gas (G1).

94701-00108NGK-BP6HS-00

15529BEARING, THRUST, YAM G1-G14

Governor thrust bearing assembly. Consists of a flat caged roller bearing and two thrust washers.

Used On: Yamaha gas, 79-95 (G1, G2, G8. G9.

93342-22502

15530BEARING, STEERING SHAFT, 30203

Tapered race and roller bearing. Measures approximately .66" 116.8mm) I.D. x 1.57" (39.9mm) O.D. x .53" (13.6mm) W.

Used On: Hyundai gas and electric, 90-UP.Yamaha gas and electric, 78-UP (G1. G2, G8, G9. Gil. G14, G16, G19, G20, G21).

93332-00010 93332000Y2

15532BEARING, 6008

Ball bearing, open both sides. Measures approximately 1.57" (39.9mm) I.D. x 2.68' (68.1mm) O.D. x .58" (14.9mm) W.

Used On: Club Car electric, 84-UP; Cushman; E-Z-Go 4-cycle gas, 91-UP; Noland; Pargo; Yamaha electric, 79-921G1, G2, G8. 1992 and earlier, G9).

93306-0080193306-00803

155330 RING. DRIVE CLUTCH. YAM G1

For sliding sheave on drive clutch. Used On: Yamaha 2-cycle gas. 82-89 (G1). 93210-27458

15534 0 RING, KING PIN, YAM G1

For top of king pin.

Used On: Yamaha 2-cycle gas and electric, 82-89 IG1}.

93210-1541493210-15566

155350 RING, WIPER SHAFT. YAM G1-G9

For movable contact wiper shaft.

Us«d On: Yamaha electric, 80-34 (G1, G2, G8, G9).

93210-10107 93210-10166 93210-11453

15536

OIL SEAL, OIL PUMP, YAM G1

For oil pump drive gear cover.

Used On: Yamaha 2-cycle gas, 78-89 (G1).

93112-5300193112-53004

15537OIL SEAL, GOV. SHAFT, YAM G1-G16

Seal measures approximately .30" (7.7mm) I.D. x .55" (14mm) O.D. x .15" |3.8mm) W.

Used On: Yamaha gas, 79-96 (G1, G2, G8, G9, G11.G14, G16K

93104-0805893109-08008

93109-08050

15538OIL SEAL, STEERING SHAFT, YAM G1

Seal measures approximately .50" 114.2mm) I.D. x .83" (21.1mm) O.D. x .12" (3mm) W.

Used On: Yamaha 2-cycle gas and electric, 78-89 (G1).

93104-15005

15539OIL SEALFRONT SPINDLE

Seal measures approximately 1.130" (28.70mm) I.D. x 1.860" <47.24mm> O.D. x .270* <6.85mm> thick.

Used On: Hyundai gas and electric, 91-UP

15540OIL SEAL, PITMAN, YAM 82-89

Seal measures approximately .82" (20.8mm) I.D. x 1.26* (32.1mm) O.D. x .19" (4.9mm) W.

Used On: Yamaha gas and electric, 82-89 (G1,G2).

93102-2208293102-22087

15541 OIL SEAL PITMAN, YAM 78-81

Seal measures approximately .83" <21mm> I.D. x 1.42" (36.1mm) O.D. x .23* {5.8mm} W.

Used On: Yamaha 2-cycle gas and electric, 78-81 (G1).

93101-22067

15542SPRING. BRAKE PEDAL, YAM G1-G19

Pedal return spring.

Used On: Yamaha gas and electric, 79-UP (01,02.08.09,014,616,619).

90508-40543 90508-405A9

15543SPRING, HILL BRAKE, YAM 79-82

Pedal return spring.

Used On: Yamaha 2-cycle gas and electric, 79-82 (G1).

90508-2038390508-23497

15544SPRING, HILL BRAKE, YAM 83-UP

Hill brake torsion spring.

Used On: Yamaha gas and electric, 83-UP (G1, G2_r G8. G9. G14, G16. G19).

90508-14548

15545 SPRING, ACCEL PEDAL, YAM 78-81

Tension-type, eighteen-coil spring. Measures approximately 3-5/8' long.

Used On: Yamaha 2-cycle gas, 78-81. 90506-29187

15547RIVET, DRIVE, IVORY

Plastic rivet with center drive pin. Color matched to Yamaha ivory.

Used On: Universal application on many golf cars and industrial vehicles.

90267-6313490269-07045

15553 GASKET, EXHAUST, YAM G16G22

Die-cut gasket. Measures approximately 2-1/8" between mount hole centers.

Used On: Yamaha 4-cycle gas, 96-UP {G16, G20, G21,G22).

7YK-14613-01

15560BATTERY HOLD DOWN ROD.HYU ELE

"J-hook" type, zinc plated steel threaded ^crod, approximately 11-3/4" long (6mm

threads}. Uses nut, P/N 252N.

Used On: Hyundai electric.

15561BATTERY HOLD DOWN ROD.HYU GAS

"J-hook" type, zinc plated steel threaded ^ rod, approximately 9-3/8" long (6mm

threads!. Uses nut, P/N 252N.

Used On: Hyundai gas.

15562FUSE. 10A. METRIC

Glass fuse, 10-amps, 30mm L x 6.4mm diameter.

Used On: Universal application on many golf cars and industrial vehicles.

1E6-82151-00

15563

FUSE HOLDER. BLACK

Bullet type holder for 10-amp metric fuse. Used On: Yamaha gas and electric. 1E6-82150-00 J14-82150-00

SHEAVE, SUOING, YAM G2-G22

Cast aluminum sheave includes P/N 15675 bushing and P/N 872 seals (2). Replaces P/N 851 and modified in order to add G16, G20, G21 and G22.

Used On: Yamaha 4-cycle gas. 85-UP IG2, 08,09,016,020,021.022).

JN6-G6270-00 JN6-G6270-01-KI

JN6-G6271-02

15675BUSHING, SUDING SHEAVE, YAM

Bronze alloy split bushing. Measures approximately .80" (20.3mm) I.D x .91* (23.3mm) O.D. x 1.36" (34.6mm) L. Used in P/N 15664 sliding sheave.

Used On: Yamaha gas, 78-UP (G1, G2, G8, G9_r G11, G14, G16, G20, G21. G22).

90384-20143

15699

CARB REPAIR KIT, YAM G1

Kit includes: Float-bowl O-ring and center mount gasket/washer, main nozzle, pilot adjusting screw and spring, idle stop screw and spring, float pin, pilot jet.

Used On: Yamaha 2-cycle gas, 78-81 and 83-89 (Gl |.

15700CARB REPAIR KIT. YAM G2/G8/G9

•» Kit includes: Needle valve, springs, float "' bowl bolt gasket and O-ring, main nozzle "" and jets.

Used On: Yamaha 4-cyde gas, 84-94 (G2, G8, G9>.

15701SHOCK, REAR, YAM G14/G16

Molded rubber bushing with sleeve mount both ends and 14-coil outer spring. Extended length is 14", measured end to end.

Used On: Yamaha 4-cycle gas, 96-UP (G14, G16).

JN3-F2210-00JN4-F2210-00

15702SHOCK, FRONT, YAM G14/G16

Molded rubber bushing with sleeve mount both ends, and 7-coil outer spring. Extended length is 12", measured end to end.

Used On: Yamaha 4-cycle gas, 96-UP {G14, G16).

JN3-F3350-00

15705

GASKET SET, TOP END, YAM G1

Set includes one each head gasket, cylinder base gasket, reed valve gasket and exhaust gasket.

Used On: Yamaha 2-cycle gas. 79-89 (G1).

15764MOTOR. CC, YAM

36/48-volt. 3 or 4 HP, 10-spline motor. (3 HP on 36-volt systems 12820 rpm; 4 HP on 48-volt systems @ 4250 rpm)

Used On: Club Car 36-volt electric, 84-UP; Yamaha 36-volt electric, 89-93 1/2 <G2, G8, G9).

JG6H1890-00

15767

BRUSH HOLDER, CC, EZ, YAM

Insulated brush holder with tension springs. Includes rubber mount grommets and screws.

Used On: Club Car electric, 94-UP; E-Z-Go electric, 94-96(Medalist/TXT); Yamaha 36-volt electric, 92-00 (G8. G9. G14, G16).

JH7-H1840-0000

15791 TUNE UP KIT. YAM G11/16/20/21/22

Includes one each of P/N 938 foam pre-filter, P/N 935 air filter, P/N 72084-G01 fuel filter, and P/N 355 spark plug.

Used On: Yamaha 4-cycle gas, 96-UP (611. G16, G20,G21,G22).

15792TUNE UP KIT, YAM G14

Includes one each of P/N 226EC foam pre-filter, P/N 974 air filter, P/N 72084-G01 fuel filter, and P/N 355 spark plug.

Used On: Yamaha 4-cycle gas, 94-95 (G14).

15795

BELT,GENERATOR,YAM G16-G22[10)

Reinforced belt. Measures approximately 9/16" Wx 35-5/16" O.D.

Used On: Yamaha 4-cycle gas, 96-UP (G11, G16,G2O, G21.G22).

JN6-H1173-00-00

15822

ACCESS PANEL, YAM G14/16/19/22

Injection molded, black plastic with "YAMAHA" imbedded in surface.

Used On: Yamaha 4-cycle gas and electric, 94-UP{G14, G16, G19_rG22).

JN3-K8151-00-00

15825BUSHING, KING PIN LOWER, METAL

Flange-type bushing. Measures approximately .59* (15mm) I.D. x .67" (17.1mm) O.D. x .35" (8.9mm) W.

Used On: Yamaha 4-cycle gas and electric, 84-UP (G2, G8, G9, G11, G14, G16, G19, G20, G21).

90384-1582590386-15139

15826BUSHING, KING PIN UPPER, METAL

Bi-metal, flange-type bushing. Measures approximately .59" (15mm) I.D. x .67" (17.1mm) O.D. x .67" (17mm) L. Flange measures approximately .91" (23.2mm) O.D. x.04" (1mm)thick.

Used On: Yamaha 4-cycle gas and electric, 84-UP (G2, G8₍ G9, Gil, G14, G16, G19, G20, G21).

90384-15826

15860 SIDE TRIM, YAM G8/14/16/19

Injection molded flexible black plastic. Fits either side.

Used On: Yamaha 4-cycle gas and electric, 90-02 (G8, GRG16.G19).

JF2-K818A-00-00

15861 SIDE TRIM, YAM G2/G9

Flexible black vinyl extrusion. Fits either side.

Used On: Yamaha 4-cycle gas and electric, 85-94 <G2, G9).

J55-K818A-00-00

15862END CAP, YAM G2/G9

Injection molded black plastic with two counter-sunk mount holes. Fits passenger side front, driver side rear.

Used On: Yamaha 4-cycle gas and electric, 85-94 (G2. G9).

J38-7818E-0000

15863END CAP. YAM G2/G9

Injection molded black plastic with two counter-sunk mount holes. Fits driver side front, passenger side rear.

Used On: Yamaha 4-cycle gas and electric, 85-94 (G2_r G9).

J38-7818F-00-00

15864SCUFF GUARD, DRIVER, YAM G14/16/19/22

Molded, black flexible rubber with five mount holes. (Install using five P/N 339 black plastic push rivets)

Used On: Yamaha 4-cycle gas and electric. 94-UPIG14, G16,G19,G22).

JN3-K8243-00-00

15865 SCUFF GUARD. PASS, YAM G14/16/19/22

Molded, black flexible rubber with five mount holes. (Install using five P/N 339 black plastic push rivets)

Used On: Yamaha 4-cvcle gas and electric, 94-UP(Gi4,G16,G19, G22).

JN3-K8244-00-00

15866BUMPER, REAR, YAM G14/16/19/22

Blow-molded black plastic with textured finish.

Used On: Yamaha 4-cycle gas and electric, 94-UP(G14, G16, G19, G22).

JN3-K7540-00-00JN6-K7540-00-00

15867KNUCKLE ARM, YAM G14/16/19/20/21

Stamped from 5/16" steel and painted black.

Used On: Yamaha 4-cycle gas and electric, 94-02 (G14, G16, G19, G20, G21).

JN3-F3512-00-00

15868 KNUCKLE ARM, YAM G2/G8/G9

Stamped from 5/16" steel and painted black.

Used On: Yamaha 4-cycle gas and electric,

85-94 (G2, G8, G9).

J38-23512-0000 J38-23512-01-00 J38-23512-02-00

15869 CAP, KING PIN, YAM G16/G19

Injection molded soft plastic. Measures approximately .75" (19mm) O.D. x .62' (15.7mm) I.D.

Used On: Yamaha 4-cycle gas and electric, 98-02 (G16, G19).

90334-19800-00

15870SHOCK, FRONT, ELE, YAM G14/16/19

Molded rubber bushing with sleeve mount both ends, and 8-coil outer spring. Extended length is 11-578", measured end to end.

Used On: Yamaha electric, 94-02 (G14, G16, G19}.

JN4-F335Q-00-00

15871SHOCK, FRONT, ELE, YAM G2/G9

Molded rubber bushing with sleeve mount both ends, and 11-coil outer sprin. Extended length is 11-11/16', measured end to end.

Used On: Yamaha electric, 85-94 <G2, G9).

J41-23350-00-00 JG6-F3350-00-00

JH7-F3350-00-00

15872SHOCK, REAR, ELE, YAM G2/G9

Molded rubber bushing with sleeve mount both ends, and 11 -coil outer spring. Extended length is 13", measured end to end.

Used On: Yamaha electric, 85-94 (G2, G9).

J41-22210-00-00J41-22210-02-00

JG6-F2210-00-00

15873VOLTAGE REGULATOR, YAM G8-G22

Sealed unit in an aluminum heat-sync housing.

Used On: Yamaha 4-cycle gas, 90-UP, (G8, G9, GK G16, G20, G21, G22).

JF2-81910-00-00 JF2-81910-01-00

15874MOTOR, 48V, YAM G19

48-volt, 2.7 HP, 19-spline motor.

Used On: Yamaha 48-volt electric, 96-02 IG19).

JR1-H1890-10

16005BATTERY CABLE SET. YAM G14-G16

> Five cable set includes, 12" (3) and 9" (2) 6-«, gauge black.

* Used On: Yamaha 36-volt electric. 94-UP {G14. G16).

16006BATTERY CABLE SET. YAM G2-G9

Fivo cable set, 12" (5) 6-gauge black.

Used On: Yamaha 36-volt electric, 85-94 (G2, G8. G9).

16007BATTERY CABLE SET. YAM G22. 48V

Five cable set includes. 7-1/2" (1) and 14* ~ (4) 6-gauge black.

Used On: Yamaha 48-volt electric, 03-UP (G22).

16008BATTERY CABLE SET, YAM G19, 48V

Five cable set includes. 7-1/2* (2) and 14' (3) 6-gauge black.

Used On: Yamaha 48-volt electric, 96-02 (G19).

16009

TUNE UP KIT, YAM G1

Includes one each of P/N 226EC foam pre-filter, P/N 974 air filter, P/N 229FF fuel filter, P/N 422 oil filter and P/N 346 spark plug.

Used On: Yamaha 2-cycle gas, 78-89 (G1).

16010TUNE UP KIT, YAM G2-G9

Includes one each of P/N 226EC foam pre-filter, P/N 429 air filter, P/N 560 fuel filter, and P/N 342 spark plug.

Used On: Yamaha 4-cycle gas, 85-94 |G2, G8, G9).

16016

RELAY, YAM G16-G22

Relay assembly with guided four male tab socket connector.

Used On: Yamaha 4-cycle gas, 96-UP (G16, G20, G21» G22}.

4U8-81950-02

MOTOR MOUNT.REAR.YAM G2-G14

Rubber and steel rear vibration damper assembly with two 8mm studs.

Used On: Yamaha 4-cycle gas, 85-95 (G2. G8, G9, G14).

J38-21486-00

16020 MOTOR MOUNT.FRONT.YAM G2-G14

Rubber and steel front vibration damper assembly with two 8mm studs.

Used On: Yamaha 4-cycle gas, 85-95 <G2, G8, G9, G14).

J38-21488-00

SPRING, BRAKE SHOE, CC, CHO, EZ, YA

"U-shaped* spring steel retainer for brake shoes. NOT FOR USE ON BENDIX BRAKE SYSTEM.

Used On: Club Car gas and electric, 81-UP; Columbia/Harley gas and electric, 86-94; E-Z-Go gas and electric, 81-96; Yamaha gas and electric, 78-91 (G1, G2, G8, G9>.

J10-27281-00

DUST COVER, BRAKE, CC. CHD, EZ, YAM

Molded neoprene cover for brake actuator. NOT FOR USE ON BENDIX BRAKE SYSTEM.

Used On: Club Car gas and electric, 81-UP; Columbia/Harley gas and electric, 86-94; E-Z-Go gas and electric, 81-96; Yamaha gas and electric. 78-91 (G1. G2_r G8, G9>.

J10-27286-00

16033

CARBURETOR, YAM G1

Float bowl styled Mikuni carburetor with vent hose.

Used On: Yamaha 2-cycle gas, 83-89 (G1). J24-14101-01

16034CARBURETOR. YAM G2-G11

Float bowl style Mikuni carburetor with choke and throttle cable mount brackets. (J3802 casting)

Used On: Yamaha 4-cycle gas. 85-94 (G2, G8, G9. G11).

J38-14101-02

16035

CARBURETOR, YAM G14

Float bowl style Mikuni carburetor with choke and throttle cable mount brackets. (JN310 casting)

Used On: Yamaha 4-cycle gas. 94-95 (G14). JN3-1410M0

16036CARBURETOR, YAM G16

Float bowl style Mikuni carburetor with choke/throttle cable mount bracket and plastic vent tube. (JN615 casting)

Used On: Yamaha 4-cycle gas, 96-UP IG16).

JN6-14101-15

16038BOLT, RAMP SHOE. YAM G9-G22

Allen-head bolt. Threaded length approximately 1".

Used On: Yamaha 4-cycle gas 92-UP {G9, G11.G14, G16. G20, G21,G22).

SPRING, YAM G11-G22

8-coil spring for driven clutch assembly. Used with P/Ns 850 and 15664 sliding sheaves.

Used On: Yamaha 4-cycle gas, 96-UP <G11, G16, G20. G21.G22).

Tips: Be sure to watch models and years in order to avoid confusion with the spring P/N 90508-45679.

90508-45844

16040CRANKSHAFT, YAM G2-G9

Balanced crankshaft assembly with helical and spur gears.

Used On: Yamaha 4-cycle gas, 85-94 (G2, G8, G9, G11}.

J38-11400-00

16041CONNECTING ROD, YAM G2-G11

Cast steel connecting rod.

Used On: Yamaha 4-cycle gas, 85-94 (G2_fG8, G9, Gil).

J38-11650-00

16042BOLT, CONNECTING ROD, YAM G2-G11

Oval-head bolt.

Used On: Yamaha 4-cycle gas 85-94 (G2, G8, G9_rG11).

16043OIL SPLASHER,YAM G2-G9

Stamped steel splasher bolts onto connecting rod.

Used On: Yamaha 4-cycle gas, 85-94 (G2, G8, G9, G11).

J38-11657-00

16044 CARBURETOR JOINT, YAM G2/G8/G9

Molded plastic mount joint with two threaded studs.

Used On: Yamaha 4-cycle gas, 85-94 (G2, G8, G9, Gil).

J38-13596-00

16045SPRING. THROTTLE STOP, YAM G2-G9

—'19-coils with "C" hook at each end.

Measures approximately 1-1/4" L.

Used On: Yamaha 4-cycle gas, 85-94 {G2, G8_fG9,

J38-14133-00

16046STOP SWITCH, YAM G2-G9

Accelerator actuated plunger-type switch with plastic housing, rubber moisture boot and two plastic adjustment nuts. Has two lead wires with male bullet-type connectors.

Used On: Yamaha 4-cycte gas and electric, 85-94 (G2, G8, G9).

J41 -82550-02

16047AIR CLEANER HOOK, YAM G14

Injection molded hook fastener. Used for securing air cleaner canister top.

Used On: Yamaha 4-cycle gas, 94-95 (G14). J45-14436-00

16048FUEL PUMP, YAM G8/G14

Mikuni pump, aluminum housing.

Used On: Yamaha 4-cycle gas, 90-95 (G8, G14).

JF2-24410-20

16050CONTROLLER, YAM G8/G9

36-volt solid-state electronic speed controller.

Used On: Yamaha 36-volt electric, 90-94 (G8, G9).

JF3-86510-11

SHEAVE, SLIDING, YAM G14

Cast aluminum sheave includes bushing, seals and grease fitting.

Used On: Yamaha 4-cycle gas, 94-95 (G14).

Tips: Recommended for extremely hilly courses.

JN3-G6270-00

16053THROTTLE SENSOR, YAM G14-G16

Black plastic housing with 40" long 3-wire harness and a triangular-shaped moisture-resistant female plug.

Used On: Yamaha 36-volt electric, 94-96 (G14, G16).

JN4-85885-00

16054CONTROLLER, YAM G14-G16

36-volt solid-state electronic speed controller.

Used On: Yamaha 36-volt electric, 94-96 (G14,G16).

JN4-86510-00

RING SET. STD. YAM G14

Five ring set.

Used On: Yamaha 4-cycle gas, 94-95 (G14).

JN5-11610-00

RING SET,.25MM,YAM G14

Five ring set.

Used On: Yamaha 4-cycle gas, 94-95 (G14).

JN5-11610-10

RING SET,.50MM,YAM G14

Five ring set.

Used On: Yamaha 4-cycle gas, 94-95 (G14).

16058

PISTON ASSEMBLY, STD, YAM G14

Aluminum alloy. Includes rings, piston pin and retainers.

Used On: Yamaha 4-cycle gas, 94-95 <G14).

JN5-11631-00-96

16059 PISTON ASSEMBLY,.25MM_rYAM G14

Aluminum alloy. Includes rings, piston pin and retainers.

Used On: Yamaha 4-cycle gas, 94-95 (G14).

JN5-11635-00

16060PISTON ASSEMBLY,.50MM_rYAM G14

Aluminum alloy. Includes rings, piston pin and retainers.

Used On: Yamaha 4-cycle gas, 94-95 (G14).

JN5-11636-00

16061

GASKET, VALVE COVER, YAM G16G22

Die stamped gasket with four mount holes and two locating tabs.

Used On: Yamaha 4-cycle gas, 96-UP (G16, G20, G21, G22).

JN6-11193-00

16062 CRANKSHAFT, YAM G16/20/21/22

Balanced crankshaft assembly with two spur gears.

Used On: Yamaha 4-cycle gas, 96-UP (G16, G20. G21, G22).

JN6-11400-00

16063 CONNECTING ROD, YAM G16/20/21/22

Cast aluminum rod assembly with splasher.

Used On: Yamaha 4-cycle gas, 96-UP (G16, G20, G21, G22).

JN6-11650-00

16064

BOLT, CONNECTING ROD, YAM G16-G22

Flange-head bolt.

Used On: Yamaha 4-cycle gas 96-UP (G16, G20, G21, G22).

16065TIE ROD END, RT THR, YAM G16-G21

Die cast aluminum housing with R/H rod end threads.

Used On: Yamaha 4-cycle gas and electric, 96-UP(Gi6, G19,G20,G21).

Internal threads

16066TIE ROD END. LT THR, YAM G16-G21

Die cast aluminum housing with L/H rod end threads.

Used On: Yamaha 4-cycle gas and electric, 96-UP(G16_fGi9, G20.G21}.

Internal threads

16067 FUEL PUMP, YAM G16/20/21/22

Mikuni pump, aluminum housing.

Used On: Yamaha 4-cycle gas, 96-UP (G16, G20, G21,G22).

JN6-F4410-00

16068

GAS CAP, YAM G16/20/21/22

Injection molded black plastic with seal and check-ball vent.

Used On: Yamaha 4-cycle gas, 96-UP (G16, G20, G21, G22).

JN6-F4610-00

16069CABLE, ACCELERATOR, YAM G16/G22

Flexible metal vinyl covered housing with stranded stainless-steel inner cable and moisture seal boots on each end. An extra 15-5/8' abrasion protection sheath is positioned over the housing on the threaded sleeve end. Approximate measurements: Housing: 26-3/4"; Cable: 32-3/4".

Used On: Yamaha 4-cvcle gas, 96-UP (G16, G22).

JN6-F6312-00

SPRING SEAT, YAM G11-G22

Die cast 19-spline aluminum spring seat with three ramp shoes and hex socket retainer bolts. Used with P/Ns 850 and 15664 sliding sheaves.

Used On: Yamaha 4-cycle gas, 96-UP (Gil, G16, G20, G21.G22).

Tips: Be sure to watch models and years in order to avoid confusion with the spring seat P/N J38-46284-00.

JN6-G6280-00

16072BEVERAGE HOLDER, YAM G16-G22

Injection molded black plastic 'snap-in" insert with fine textured surface.

Used On: Yamaha 4-cycle gas and electric, 96-UP (G16, G19, G22).

JN3-K835E-00

16073THROTTLE SENSOR, YAM G19/G22

Black plastic housing with 40" long 3-wire harness and a triangular-shaped moisture-resistant female plug.

Used On: Yamaha 48-volt electric, 96-UP {G19, G22).

JR1-85885-00

F&R SWITCH, YAM G19/G22

Plastic "snap-in" 2-pole switch with rocker-type selector, three wire harness and three-prong female "snap-in: connector. Harness measures approximately 6-1/2" long, including connector.

Used On: Yamaha 48-volt electric. 96-UP (G19, G22).

JR1-H2917-00

16075CONTROLLER, YAM G19

48-volt solid-state electronic speed controller.

Used On: Yamaha 48-volt electric, 96-02 <G19>

JR1-H6510-02

16078

FUEL PUMP. YAM G2

Mikuni pump, aluminum housing.

Used On: Yamaha 4-cycle gas, 85-91 IG2).

J38-24410-10

16079

FUEL PUMP, YAM G9

Mikuni pump, aluminum housing.

Used On: Yamaha 4-cycle gas, 91-94 (G9).

JG5-24410-00

16105MOTOR, 5HP, CC, YAM 10 SPLINE

36-volt, 5 HP, 10-spline high speed motor.

Used On: Club Car electric, 36-volt, 84-95; Yamaha electric, 88-94 (G2, G8, G9. G14).

16106MOTOR, 2HP, CC, YAM 10 SPLINE

36-volt, 2.5 HP, 10-spline motor.

Used On: Club Car electric, 36-volt, 96-UP; Yamaha electric, 88-95 {G2. G8, G9, G14).

16150MOTOR, 5HP.T0RQ. 19S, EZ. YAM

36-volt. 5 HP, 19-spline motor.

Used On: E-Z-Go electric, 88-UP (Non DCS); Yamaha electric, 93-96.

16159GEARS. HIGH SPEED, YAM G16-G22

Includes (1) 28-tooth gear. (1) 111 tooth gear and replacement governor spring.

Us«d On: Yamaha 4-cycle gas. 96-UP (G16. G20. G21, G22).

BRUSH COVERS, STARTER. CC. CHD. E2.YAM

Molded rubber "snap-in* cover for brush access openings.

Used On: Club Cor gas, 84-UP; Columbia/ Harley 2-cycle gas, 67-95; E-Z-Go gas, 80-UP; Yamaha gas, 78-UP {G1, G2,*G3, G5, G8, G9, Gil. G14, G16, G20, G21, G22).

16894-G1 26887-G1 26888-G01

16177GASKET. CARBURETOR, YAM G16-G22

Die-cut gasket. Measures approximately 2-1/16" between mount hole centers.

Used On: Yamaha 4-cyde gas, 96-UP. (G16.G20, G21.G22)

JN6-13567-00-00

REED SWITCH, YAM ELE G14-G16

Dual sensors with 4-wire harness and x molded snap-in plug.

Used On: Yamaha electric, 95-02.

JN4-8253R-0000

16188WEIGHT. DRIVE CLUTCH, YAM G16-G22

Centrifugal weight with bushing. Bushing I.D. approximately 8.03mm {.316*).Three required per assembly.

Used On: Yamaha 4-cycle gas. 96-UP (G16. G20. G21, G22).

JN6-G6232-0000

16189ROLLER. DRIVE CLUTCH. YAM G16G22

Injection molded roller-type bushing. Measures approximately .377* 1.0. x .552" O.D. (excluding shoulders). Shoulders measure approximately .622" O.D. x .118W.

Used On: Yamaha 4-cycle gas. 96-UP (G16. G20.G21.G22).

JN6-G6258-00-00

16190

BOLT, DRIVE CLUTCH. YAM G16-G22

6mm Allen-head bolt for weight link. (Three required per assembly.) Approximate measurements: Overall length 2-1/2"; shaft length 2"' thread length 1/4'.

Used On: Yamaha 4-cycle gas 96-UP (G16, G20, G21.G22}.

16191NUT. DRIVE CLUTCH BOLT, YAM G16-G22

6mm nyloc nut for use with drive clutch bolt on weight link. (Three required per assembly.)

Used On: Yamaha 4-cycle gas, 96-UP (G16, G20. G21.G22).

90185-06834-00

16192CARBURETOR JOINT. YAM G16-G22

Phenolic insulator block, approximately 13/16* thick and 2* between centers of mount holes.

Used On: Yamaha 4-cycle gas. 96-UP (G16, G20. G21.G22).

JN6-1359500-00

16194MOTOR MOUNT, YAM G16G22

Molded rubber mount with eight cogs. Hole I.O. is approximately 1/2*.

Used On: Yamaha 4-cycle gas, 96-UP (G16, G20, G21. G22).

JN6-F1486-00-00

SEAL, VALVE STEM, INTAKE, YAM

Heat resistant neoprene material with coiled spring around stem hole. Use with P/Ns 813A and 15446 valve. Measures approximately .20' (5.2mm) I.D. x .473 (12mm) O.D. x .35" (8.9mm) W.

Used On: Yamaha 4-cycle gas valve stem, 85-UP {G2. G8, G9, Gil. G14, G16, G20, G21, G22).

5H0-12119-00

SPLINED: 3/4" DIAMETER

16625

AXLE, REAR, DRIVER. YAM EG16-G22

Measures approximately 18-1/2" long. Used On: Yamaha electric 96-UP (G16, G19. G22}.

SPLINED: 3/4" DIAMETER

16626

AXLE, REAR. PASS. YAM EG16-G22

S59.90 UM: EA

Measures approximately 23-1/4' long. Used On: Yamaha electric 96-UP {G16, G19, G22).

SPLINED: 3/4" DIAMETER

16627

AXLE, REAR, DRIVER, YAM GG16G22

$49.90 um ea

Measures approximately 23-3/4" long

Used On: Yamaha gas 96-UP (G16. G20,

G21.G22).

SPLINED: 3/4" DIAMETER

16628

AXLE, REAR, PASS, YAM GG16-G22

$43.90 um ea

Measures approximately 18-1/4" long.

Used On: Yamaha gas 96-UP (G16, G20,

G21.G22).

SPLINED: 3/4" DIAMETER

16629

AXLE, REAR. DRIVER, YAM EG14G16

S47.90 um ea

Measures approximately 19-3H6" long.

Used On: Yamaha electric 94-95 (G14,

G16).

SPLINED: 3/4" DIAMETER

16630

AXLE, REAR, PASS, YAM EG14G16

$45.90 um ea

Measures approximately 22-9/16" long.

Used On: Yamaha electric 94-95 IG14,

G16}.

LIFT KIT, YAM G22

Tubular steel constructed front A-frames and cradle support frame with bolt-on front and rear shock extenders. All steel components have a shiny black dry powder coat finish. Includes all required hardware and complete, illustrated installation instructions.

Used On: Yamaha gas and electric 03-UP (G22).

16646

LIFT KIT, YAM G2/G9

Tubular steel constructed A-frame and rear upper shock support mount with a black dry powder coat finish. Includes spacers and adapter as required, all required hardware and complete, illustrated installation instructions.

Used On: Yamaha gas and electric 85-94 (G2, G9).

17290-G1SPRING.BRAKE SHOE

Seventeen-coil spring. Measures approximately 3-3/4" long.

Used On:

Hyundai gas and electric, 90-UP

17429-G1BRAKE SHOES, CC, CHD, EZ, YAM

PI)

Bonded lining measures 1-3/16" W x 6" L.

Used On: Club Car gas and electric, 81-94; Columbia.''Harley gas and electric, 86-89; E-Z-Go gas and electric, 82-86 1/2; Legend; Yamaha 2-cycle gas and electric, 78-81

J10-25330-00J10-W2536-00

J10-W2536-01

200BUMPER END CAP, YAM G1

Molded trom high impact plastic. Fits front and rear bumpers, either side. Easily attached with just one aluminum rivet.

Used On: Yamaha 2-cycle gas and electric, 78-89 (G1).

J10-78167-00 J10-78167-01

J10-78168-00 J10-78168-01

BUCKLE, BAG STRAP, YAM 78-UP

Made of black high impact A6S with zinc plated metal pin and clips.

Used On: Yamaha 2-cycle gas and electric, 78-UP.

90386-0610893430-05033

J17-78157-00 J17-78368-00

J17-78369-00

226ECPREFILTER_fG1/G2/G8/G9/G14|180)

Foam outer "prefilter" slides over air filter element. Provides extra filtration, extends engine life and protects inner filter. Can be cleaned, re-oiled and re-used.

Used On: Hyundai gas 91-UP

2123

FILTER.AIR

Oil impregnated paper element, with perforated inner and outer metal encasement, metal end caps, O-ring top seal and cushion insert on bottom.

Used On: Hyundai gas, 91-UP

215SPRING, THROTTLE SHAFT, YAM G1

Return spring for throttle shaft lever. Used in P/N 209 throttle shaft kit.

Used On: Yamaha 2-cycle gas, 78-89 (G1). J10-14131-00

217TRIM. KICK PLATE, YAM G1

Die cut 1/8" pebble-texture mat, mounts on rear body.

Used On: Yamaha 2-cycle gas and electric, 78-89 (G1).

J10-78119-00

221KEY SWITCH, YAM G1 GAS

Black plastic housing with P/N 224SK keys (2), wire harness, plug-in connectors and rubber seal boot.

Used On: Yamaha 2-cycle gas, 78-89 <G1). J10-82508-20 J17-82508-20

1012288

CLUTCH, DRIVEN

Salsbury-style clutch.

Used On: Hyundai gas, 91-96 (HGG-1)

224SKKEY, YAMG1-G11

(K-

Replacement key for P/Ns 221. 15497 and J55-82510-00 ignition switch.

Used On: Taylor Dunn; Yamaha gas and electric, 78-94 {G1, G2, G8, G9, G11).

J10-82511-20J17-82511-00

J17-82511-20-YY

226EC PREFILTER, Gi/G2/G8/G9/G14{180)

Foam outer "pre-filter" slides over air filter element.

Used On: Hyundai gas, 91-UP; Yamaha gas, 78-95 (G1, G2, G8, G9, G14).

J10-14417-00

229FF

FILTER. FUEL, 5/16", YAM G1

In-line 5/16* clear plastic filter.

Used On: Taylor Dunn; Yamaha 2-cycle gas, 78-89 (G1).

1FK-24560-01 809-24560-01

809-24560-00

230BAG STRAP, CHD, EZ, YAM

Black nylon weave strap. Measures approximately 2" W x 65" L.

Used On: Columbia/Harley gas and electric, 84-00; E-Z-Go gas and electric, 76-94 (Marathon); Legend; Melex; Yamaha gas and electric, 78-95 (G1, G2, G9, G14); Universal application for many golf cars.

J10-78355-00J17-7835500

J38-78355-00

231

BELT, DRIVE, YAM G1 (10)

Reinforced belt. Measures approximately 1-1/4" Wx 36-3/8* O.D.

Used On: Yamaha 2-cycle gas, 78-89 (G1).

J10-4624100 J10-46241-01

J10-46241-02J17-46241-00

FLOORMAT, UPPER PASS, YAM G1

Die cut 3/16" thick masticated rubber with a pebble-texture finish. Measures approximately 15-1/4' W at top x 19-1/2" W at bottom x 18-7/8" H. Has 11 punched holes.

Used On: Yamaha 2-cycle gas and electric, 78-89 <G1).

J10-78232-00J17-78232-00

23359G1SPRING.BRAKE SHOE

Fourteen-coil spring. Measures approximately 3-3/16" long. (1-7/16* hook on one end, 3/4" on other)

Used On:

Hyundai gas and electric, 90-UP

233FMFLOORMAT, UPPER DRIVER, YAM G1

Die cut '3IW thick masticated rubber with a pebble-texture finish. Measures approximately 10' W at top x 8-5/8" W at bottom x 18-1/2" H. Has 9 punched holes.

Used On: Yamaha 2-cycle gas and electric, 78-89 {G1}.

J10-78233-00 J17-78233-00

FLOORMAT. LOWER, YAM G1

Die cut 3/16" thick masticated rubber with a pebble-texture finish. Measures approximately 42-1/2" W x 16-1/2" H.

Used On: Yamaha 2-cycle gas and electric, 78-89 (G1).

J10-78231-00 J10-78231-02 J10-78235-00 J17-78231-09 J31-78234-00

J10-78231-01 J10-78234-00 J17-78231-00 J31-78231-00 J31-78235-00

GASKET. CYLINDER BASE, YAM G1

Die cut gasket.

Used On: Yamaha 2-cycle gas, 78-89 (G1).

881-11351-00881-11351-01

881-11351-02

GASKET, HEAD, YAM G1

Metal reinforced gasket.

Used On: Yamaha 2-cycle gas, 78-89 (G1).

J10-11181-00J10-11181-01

239

CYUNDER, YAM G1

For use on J10, J24 and J31 2-cycle engines. NOTE: J17 "1982" models must also use P/N 269 IMC Retro Kit.

Used On: Yamaha 2-cycle gas, 78-89. (G1). J10-11311-00

PISTON ASSEMBLY, STD. YAM G1

Aluminum alloy. Includes rings, piston pin and retainers.

Used On: Yamaha 2-cycle gas. 78-89 (G1).

J10-11631-00

PISTON ASSEMBLY..25MM, YAM G1

Used On: Yamaha 2-cycle gas, 78-89 (G1). J10-11631-10J10-11635-00

J10-11631-00

242 PISTON ASSEMBLY,.50MM, YAM G1

Used On: Yamaha 2-cycle gas, 78-89 (G1). J10-11631-20 J10-11636-00

- J10-11631-00

243

CABLE, THROTTLE, YAM G1 82-89

Flexible metal vinyl covered housing with stranded stainless-steel inner cable and moisture seal boots on each end. Approximate measurements: Housing: 67-1/2"; Cable: 72\

Used On: Yamaha 2-cycle gas. 82-89 (G1).

J10-26311-00J10-26311-01

J10-26311-02J10-26311-03

J17-26311-00J17-26311-01

244 CABLE, CHOKE, YAM G1

Flexible metal vinyl covered housing with stranded stainless-steel inner cable, knob and knurled retaining nut. Overall cable length is approximately 88-1/2", measured from base of knob to end of clevis. Housing length is approximately 86-1/4".

Used On: Yamaha 2-cycle gas, 78-89 (G1).

J10-26331-00 J10-26331-01

J10-26331-02

RING SET, STD, YAM G1

Two chromed ring set.

Used On: Yamaha 2-cycle gas, 78-89 (G1).

J10-11610-00

246 RING SET..25MM, YAM G1

Two chromed ring set.

Used On: Yamaha 2-cycle gas, 78-89 (G1).

J10-11610-10

247 • RING SET,.50MM, YAM G1

Two chromed ring set.

Used On: Yamaha 2-cycle gas, 78-89 (G1).

J10-11610-20

BEARING, 6206

Ball bearing, open both sides. Measures approximately 2.45" {62.2mm> O.D. x 1.16" (29.8mm) I.D. x .63' (16mm) W.

249MUFFLER, YAM G1

Replacement muffler, compatible with original configuration. Includes header pipe and exhaust stinger.

Used On: Yamaha 2-cycle gas, 78-81 and 83-89 (G1).

J10-14610-01J24-14610-00

250GASKET. EXHAUST, YAM G1

Die-cut metal and composition gasket. Measures approximately 2-15/16" between mount hole centers.

Used On: Yamaha 2-cycle gas, 78-89 (G1). J10-14613-O0J10-14613-01

251

GASKET, REED VALVE, YAM G1

Die cut gasket, approximately .070" thick. For 1982 models we can special order P/N 87A-13621-00 (gasket, reed valve seat).

Used On: Yamaha 2-cycle gas, 78-81 and 83-89 (G1).

10V-13621-00 3TT-13621-00

311-13621-01

252BATTERY HOLD DOWN ROD, YAM GAS

"J-hook" type, zinc plated rod, 10-1/4" long (260.4mm). Uses P/N 252N nut.

Used On: Yamaha gas, 78-UP (G1, G2, G8, G9, G14, G16, G20, G21).

J17-82133-00

253BATTERY HOLD DOWN ROD. YAM ELE

"Spoke-hook" type rod, zinc plated, 12-1/2" long (308mm). Uses P/N 252N nut.

Used On: Yamaha electric, 81-UP (G1, G2, G8, G9, G14, G16, G19).

J14-82133-00J14-82133-01

JN4-H2133-00

254 NUT, LUG, 12MM. YAM

12mm metric zinc plated steel lug nut.

Used On: Hyundai; Yamaha gas and electric, 78-UP (G1, G2, G8, G9, Gil, G14, G16, G19,G20, G21,G22)

25523G4

SPARK PLUG.BPR5ES

NGK BPR5ES.

Used On:

Hyundai.

259SIDE PANEL, YAM G1

Molded black ABS repair panel. Measures approximately 42" L x 3-1/4" W x 1/4" thick, with a 1" lip on top edge and ends. Thrifty repair for unsightly side rails on used cars.

Used On: Yamaha 2-cycle gas and electric, 78-89 (G1>.

266 KING PIN, YAM G1

Machined steel, zinc plated for protection. Measures .59" (14.9mm) O.D. 5.25* (13.3mm) overall length, and threaded shank is 1.14" (28.9mm) long.

Used On: Yamaha 2-cycle gas and electric, 82-89 (G1).

J10-23516-01J10-23516-02

269CYLINDER CONVERSION KIT, YAM 82

Converts J10 cylinder into a J17. Allows .... use of original smaller style reed and ffff \\\\ carburetor assembly. Kit includes adapter, plate, spacers, mounting bolts, gaskets. Requires cutting off corners on reed joint.

Used On: Yamaha 2-cycle gas, 1982 only.

Tips: Before installation, cylinder assemblies should always be washed thoroughly in warm, soapy water and then rinsed completely to insure that all traces of honing oil and grit have been removed. Consult the manufacturer's maintenance manual for complete installation instructions.

26928-G01

INPUT SHAFT, 22 TOOTH W/BRNGS

22-tooth input shaft with bearings for trans-axle.

Used On: Hyundai (with 22 tooth gears)

26928-G01

INPUT SHAFT, 22 TOOTH W/BRNGS

22-tooth input shaft with bearings for trans-axle.

Used On: Hyundai (with 22 tooth gears)

270HEAD BOLT, YAM G1 78-89

For Yamaha engine assemblies. 8mm x 1.25 threads x 155.6mm L

Used On: Yamaha 2-cycle gas, 78-89 (G1). 90116-08254

271BUMPER PAD. FRONT. YAM G2/G9

Made of durable impact resistant black polyethylene. Easily installed using four plastic push rivets.

Used On: Yamaha 4-cycle gas and electric, 85-94 (G2, G9).

J38-78162-00J55-K8162-00

273 SIDE PILLAR COVER, PASS. G2/G9

Thermoformed cover made of ivory colored 1/8" ABS plastic with 4 drilled mount holes.

Used On: Yamaha 4-cycle gas and electric, 85-94 (G2, G9).

J38-7813G-00 J38-7813G-01

J38-7813G-02 J55-K813G00

CABLE, BRAKE, DRIVER, YAM G1/G2E/G9E

Flexible metal vinyl covered housing with stranded steel inner cable and rubber boots on each end. Approximate measurements: Housing: 29-3/8"; Cable: 38-1/4".

Used On: Yamaha 2-cycle gas and electric, 78-89 (G1) and electric, 85-94 (G2, G9).

J17-26341-00 J56-F6341-00

J17-26341-01

CABLE, BRAKE, DRIVER, YAM G1/G2E/G9E

Flexible metal vinyl covered housing with stranded steel inner cable and rubber boots on each end. Approximate measurements: Housing: 41"; Cable: 51-1/4".

Used On: Yamaha 2-cycle gas and electric, 78-89 (G1) and electric, 85-94 (G2, G9).

J17-26351-00 J56-F6351-00

J17-26351-01

276 SIDE PILLAR COVER, DRIVER, G2/G9

Thermoformed cover made of ivory colored 1/8" ABS plastic with 4 drilled mount holes.

Used On: Yamaha 4-cycle gas and electric, 85-94 (G2, G9).

J38-7813F-00J38-7813F-O1

J38-7813F-02J55-K813F-00

278

BELT. DRIVE, YAM 4CYCLE (10)

Reinforced belt. Measures approximately 1-1/4' Wx 39-3/4" O.D.

Used On: Yamaha 4-cycle gas, 85-UP (G2, G8, G9, G14. G16>.

J38-46241-00 J55-G6241-00

279BELT, GENERATOR, YAM 4CYCLE (10)

Reinforced belt. Measures approximately 1/2" W x 36" O.D.

Used On: Yamaha 4-cycle gas, 85-UP (G2, G8, G9. G14. G16}.

J38-81173-00J55-H1173-00

J55-H1193-00

27944-G1SPRING KIT, BRAKE, CC, EZ, YAM

iiaal

Includes upper and lower tension springs, adjuster spring, two cup and spring assemblies and two retainer pins.

Used On: Club Car gas and electric, OO-UP; E-2-Go gas and electric, 97-UP; Yamaha 4-cycle gas and electric, 93-UP (G14, G16, G19).

JG5-F819G-00

280

STARTER GENERATOR, YAM G1

Hitachi-style starter-generator. (Does NOT include cooling fan}

Used On: Yamaha 2-cycle gas, 78-89 (G1). J10-81100-10

•J

COWL FRONT. IVORY, YAM G1

Thermal vacuum formed from industrial grade, color-matched ABS plastic with UV inhibitor to prevent yellowing.

Used On: Yamaha 2-cycle gas and electric, 78-89 IG1).

J17-78115-00J17-78115-90

285AIR CLEANER HOOK, YAM G1-G9

Injection molded hook fastener. Used for securing air cleaner canister top.

Used On: Yamaha gas, 78-94 (G1, G2, G8, G9).

J10-14436-00

286RETAINING RING, CRANKCASE, G1

Retaining ring for crankshaft case bearing. Used On: Yamaha 2-cycle gas, 78-88 <G1). 93450-72048

287SHOCK, FRONT, YAM G1 (2, 20]

Molded rubber bushing with sleeve mount both ends, and 10-coil outer spring. Extended length is 12-7/8", measured end to end.

Used On: Yamaha 2-cycle gas. 78-89 (G1). J10-23350-00J42-23350-00

288 SHOCK, REAR, YAM G1 [2,20)

Molded rubber bushing with sleeve mount both ends, and 14-coil outer spring. Extended length is 13-7/8", measured end to end.

Used On: Yamaha 2cyc1e gas, 78-89 (G1). J10-22210-00

293BRAKE DRUM, CC, CHD, EZ, YAM (8)

Machined casting with a 4 on 4 bolt pattern. Measures approximately 6.28" I.D. Brake shoe surface area is 1.34" wide.

Used On: Club Car gas and electric, 81-94; Columbia/Harley; E-Z-Go; Yamaha gas and electric, 82-UP.

J10-46521-00J17-46521-00

J55-G6521-00

CABLE, F & R, YAM G2-G9

Flexible metal vinyl covered housing with stranded stainless-steel inner cable and an extra 9" rubber protective sheath on spring end. Two required per car.

Used On: Yamaha 4-cycle gas, 85-94 (G2, G8, G9).

J38-46371-00 J55-G6371-00

J38-46371-01 J55-G8330-00

295COIL, IGNITION, YAM G1

For use with 12-volt COI ignition systems. Does NOT include plug cap assembly.

Used On: Yamaha 2-cycle gas, 82-89 (G1). 8H4-82310-00 8H4-82310-20

296SIDE PANEL, DRIVER, YAM G2/G9

Replacement for rusted or damaged side frame panels and eliminates need for plastic trim piece. Made of 16-gauge steel and easily installed.

Used On: Yamaha 4-cycle gas and electric, 85-94 (G2. G9).

J38-7818A-00J55-7818A-00

J55-K8183-00

297 SIDE PANEL PASSENGER, YAM G2/G9

Replacement for rusted or damaged side frame panels and eliminates need for plastic trim piece. Made of 16-gauge steel and easily installed.

Used On: Yamaha 4-cycle gas and electric, 85-94 <G2, G9).

J55-K8184-00

2FP-003181

Axle nut

__. All Hyundai

300INSTRUMENT PANEL, YAM G1

Formed from color matched ivory ABS plastic with UV inhibitor to prevent yellowing.

Used On: Yamaha 2-cycle gas and electric, 78-89 (G1>.

JlO-77711-00

30110-77

GENERATOR END CARW/BRUSHES

Replacement for Hitachi style starter-generator.

Used On: Hyundai gas, 91-UP (HGG1)

30111-77

GENERATOR END CAR BELT SIDE

Replacement for Hitachi-style starter-generator.

Used On: Club Car gas, 84-UP; Columbia/ Harley 77-UP (Hitachi style); E-Z-Go 2-cycle gas, 80-UP; Yamaha 2-cycle gas, 78-89 (G1).

J10-81165-00

J10-81165-10

30443-77BRUSH SET, GEN,

Set ot 4 Drusnes for use in Hitachi style starter-generator. Measures approximately 1"Lx 17/32" W x 7/32' thick.

Used On: Hyundai gas, 91-UP

30860-77ARMATURE,STARTER

Armature only for Hitachi style starter-generator.

Used On: Hyundai gas, 91-UP

32301-78CSPARK PLUG, BP4HS (10, 200)

NGK BP4HS.

Used On: Columbia/Harley 2-cycle gas, 82-95; E-Z-Go 4-cycle, 91-93 (Marathon); Yamaha 2-cycle gas, (G1).

94701-00159NGK-BP4HS-00

335ABRAKE SHOES.SET OF 4

y V Bonded lining measures

« ^approximately 1-3/16" wide. Rear lining

j is approximately 6-1/8" long; front is

*- *" approximately 6" long.

Used On:

Hyundai gas and electric (HGB1, HGB1A, HGG1) " ' "" "

BRAKE SHOE SHORT.FRONT.EA

Bondedliningmeasures

approximately 1-3/16" W x 6" L

Used On:

Hyundai gas and electric, 91-UP

335CBRAKE SHOE, LONG/REAR

Bonded lining measures approximately 1-3/16" Wx 5-15/16* L

Used On: Club Car gas and electric, 95-UP; ColumbiafHarley gas and electric, 86-UP; E-Z-Go gas and electric, 87-96; Hyundai gas and electric, 91-UP; Yamaha gas and electric, 82-93 (G1, G2. G8. G9}.

342SPARK PLUG, BR4ES, G2-G11(10, 200)

NGK BR4ES.

Used On: Yamaha 4-cycle gas, 85-94 (G2, G8,G9> and 93-95 (Gil).

NGK-BR4ES

346SPARK PLUG, BP5HS (10, 200)

NGK BP5HS.

Used On: Columbia/Harley 2-cycle gas, 63-68 and 82-95; E-Z-Go 2-cycle gas, 76-94 (Marathon); E-Z-Go 4-cycle, 91-93 {Marathon); Yamaha 2-cycle gas, 78-89

94700-00002-0094700-00039-00

94701-00039-0094701-00039-20

NGK-B6HSO-00NGK-BP5HS-00

349 HYUNDAI KING PIN KIT, HYUN

Kit includes: king pins (2), lower metal bushings (2) and upper metal bushings (2).

Used On: Hyundai gas and electric, 90-96;

355SPARK PLUG, BPR2ES, G11-G21(1O, 200)

NGK BPR2ES.

Used On: Yamaha 4-cycle gas, 96-UP (G11) and95-UP(G14,G16, G20, G21).

NGK-BPR2ES

370FLOORMAT, BOT PASS, YAM G2/G9

Die cut 3/16" thick masticated rubber with a pebble-texture finish. Measures approximately 8" x 15-3/4".

Used On: Yamaha 4-cycle gas and electric, 85-94 (G2, G9).

J38-7823500 J38-78235-01

J55-K8235-00

371FLOORMAT. BOT DRIVER, YAM G2/G9

Die cut 3/16" thick masticated rubber with a pebble-texture finish. Measures approximately 9-1/2" x 16*.

Used On: Yamaha 4-cycle gas and electric, 85-94 (G2. G9».

J38-78233-00 J38-78233-01

J55-K8233-00

372FLOORMAT, BOT MID, YAM G2/G9

Die cut 3/16" thick masticated rubber with a pebble-texture finish. Measures approximately 12" x 18".

Used On: Yamaha 4-cycle gas and electric, 85-94 (G2. G9).

J38-78234-00 J38-78234-01

J55-K8234-00

373FLOORMAT. COWL PASS, YAM G2/G9

Die cut 3/16" thick masticated rubber with a pebble-texture finish. Measures approximately 15" x 15-1/2".

Used On: Yamaha 4-cycle gas and electric, 85-94 (G2, G9).

J38-78232-00 J38-78232-01

J55-K8232-00

374FLOORMAT, COWL MID, YAM G2/G9

Die cut 3/16" thick masticated rubber with a pebble-texture finish. Measures approximately 8" x 15-3/4".

Used On: Yamaha 4-cycle gas and electric, 85-94 {G2, G9).

J38-78236-00 J38-78236-01

J55-K823600

375FLOORMAT, COWL DRIVER, YAM G2/G9

Die cut 3/16" thick masticated rubber with a pebble-texture finish. Measures approximately 7-3/4" x 15-3/4".

Used On: Yamaha 4-cycle gas and electric, 85-94 (G2. G9).

J38-78231-00J38-78231-01

J55-K8231-00

292

BEARING, 62032RS

Ball bearing, sealed both sides. Measures approximately .66" {16.8mm) I.D. x 1.57" (39.9mm) O.D. x .47* (11.9mm) W.

15530BEARING, STEERING SHAFT, 30203

Tapered race and roller bearing. Measures approximately .66" (16.8mm) I.D. x 1.57" <39.9mm> O.D. x .53" (13.6mm) W.

Used On: Hyundai gas and electric, 90-UP

30149-67

BEARING, 62022RS (10)

Ball bearing, sealed both sides. Measures approximately .59' (14.9mm) I.D. x 1.38* (35mm) O.D. x .43" (10.9mm) W.

30151-69BEARING, 63032RS

Ball bearing, sealed both sides. Measures approximately .67" (17mm) I.D. x 1.85" (46.9mm) O.D. x .55" (13.9mm) W.

3870-HYUNDAI BEARING, 60042RS

Hyundai axle bearing and other applications

Ball bearing, sealed both sides. Measures approximately .78" (19.8mm) I.D x 1.65* (41.9mm) O.D. x .47" (11.9mm) W.

419CONNECTING ROD ASSEMBLY, YAM G1

Assembly includes: P/N 423 bearing, piston pin (1), P/N 424 bearing, crankpin (1), P/N 425 crankpin (1), P/N 426 thrust washer, crankshaft 12) and P/N 427 connecting rod (1).

Used On: Yamaha 2-cycle gas, 78-89 (G1). 881-11651-A

420

BELT, GENERATOR, YAM G1 (10)

Reinforced belt. Measures approximately 1/2" W x 34-1/4" O.D.

Used On: Yamaha 2-cycle gas, 78-89IG1). J10-81173-00

422 FILTER, OIL, YAM G1

See-through plastic inline oil filter with mesh screen.

Used On: Yamaha 2-cycle gas, 78-89 (G1). 859-13410-00 J10-13410-00

BRAKE SHOE LONG.REAR.EA

Bondedliningmeasures

approximately 1-3/16'W x 5-15/16" L

Used On: Hyundai gas and electric

425

CRANKPIN, YAM G1

Presses into crankshaft halves.

Used On: Yamaha 2-cycle gas, 78-89 (G1).

857-11681-00

426WASHER, THRUST, YAM G1

Aluminum thrust washer for use with connecting rod assembly. (Two required per assembly)

Used On: Yamaha 2-cycle gas, 78-89 (G1). 90209-24073

19186-G1BRAKE DRUM.THIN,

Cast iron drum with precision machined 6.25" I.D. inner surface. For use with 24-spline axle shaft. Includes 1/2"-20, 4 on 4 pattern.

Used On:

Hyundai gas and electric, 91-UP

427 CONNECTING ROD, YAM G1

Precision machined to match original specifications. For use on Yamaha crankshaft assembly.

Used On: Yamaha 2-cycle gas, 78-89 (G1). 881-11651-00

FILTER, AIR, YAM G2-G9 (16)

Oil impregnated paper element, with perforated inner and outer metal encasement, metal end caps, O-ring top seal and cushion insert on bottom.

Used On: Hyundai gas, 91-UP; Yamaha 4-cycle gas, 85-94 (G2, G8, G9).

J38-14450-00

432CRANKSHAFT, YAM G1 (6)

Balanced crankshaft assembly.

Used On: Yamaha 2-cycle gas, 78-89 (G1).

J10-11400-00

433SHORT BLOCK, YAM G1

Die cast and CNC precision machined engine cases; includes seals, bearings, crankshaft, and cylinder assembly. (Less cylinder head)

Used On: Yamaha 2-cycle gas, 78-89 (G1>. ENG-J1O00-01 ENG-J3100-00

436REBUILD KIT, YAM G1

Includes one each of the following parts: cylinder, exhaust gasket, piston assembly,

^21o

o ^** crank bearings, base gasket, head gasket.

CUI O C^ crankshaft assembly, and two each crankshaft seals.

Used On: Yamaha 2-cycle gas, 78-89 (G1).

Tips: 1982 models require use of P/N 269 adapter kit.

437OIL SEAL, LARGE, YAM G1 (20)

Seal measures approximately 1.14' (28.9mm) I.D. x 2.84" (72.2mm) O.D. x .31" (7.9mm) W.

Used On: Yamaha 2-cycle gas, 78-89 (G1). 93102-30188

438 OIL SEAL, SMALL, YAM G1 (20)

Seal measures approximately 1.14" (28.9mm) I.D. x 1.89" (48.1mm) O.D. x .31" (7.9mm) W.

Used On: Yamaha 2-cycle gas, 78-89 (G1). 93102-30128

455

SCREW, CRANKCASE, YAM G1

Pan head, Phillips drive (45mm long). Used On: Yamaha 2-cycle gas, 78-89 (G1). 98503-06045 98580-06545

456SCREW, CRANKCASE. YAM G1

Pan head, Phillips drive (60mm long). Used On: Yamaha 2-cycle gas. 78-89 (G1).

92501-0605598501-06055

98580-0605598580-06555

457

SCREW, CRANKCASE, YAM G1

Pan head, Phillips drive (65mm long). Used On: Yamaha 2-cycle gas, 78-89 (G1). 98501-06065 98580-06565

461PISTON PIN, YAM G1

Made of high temperature steel.

Used On: Yamaha 2-cycle gas, 78-89 (G1).

818-11633-00

462PISTON PIN CLIP, YAM G1

Wire-type retaining ring for piston pin. Used On: Yamaha 2-cycle gas, 78-89 <G1|. 93450-20026

16917-G1BRUSH SET, MOTOR, HYU

Set of 4 brushes {with studs) for GE motors. Measures approximately 1-7/16" L x 5/8" W, 1/2" thick.

Used On: Hyundai electric

550STOP SWITCH, YAM G1 82-89

Accelerator actuated plunger-type switch with plastic housing, rubber moisture boot and two adjustment nuts. Has four lead wires with male bullet-type connectors.

Used On: Yamaha 2-cycle gas, 82-89 (G1). J17-8255000J17-8255001

560

FILTER, FUEL, YAM G2-G9

In-tank type fuel filter.

Used On: Yamaha 4-cycle gas, 85-94 (G2, G8, G9).

8R4-24560-00

16067FUEL PUMP, HYUNDAI

Mikuni pump, aluminum housing. Used On: HYUNDAI

5H0-12119-00 SEAL, VALVE STEM, INTAKE, YAM

Heat resistant neoprene material with coiled spring around stem hole. Use with P/Ns 813A and 15446 valve. Measures approximately .20" (5.2mm) I.D. x .473 (12mm) O.D. x .35" (8.9mm) W.

Used On: Yamaha 4-cycle gas, 85-UP (G2, G8, G9, Gil. G14, G16, G20, G21, G22).

61254-89

GAS CAP,

Direct replacement.

Used On: Hyundai gas, 91-UR

69200-89A

MOTOR, 4HP, CHD, EZ, YAM

36-volt, 4 HP, 19-spline motor.

Used On: ColumbiaiHarley electric, 90-98; E-Z-Go electric, 88-UP INon DCS); Yamaha electric, 93-96.

702

KEY, HYUNDAI. 90-UP

For Hyundai ignition switch.

Used On: Hyundai gas and electric, 90-UR

719

MOTOR, 36V, 3.5HP, 19SP

36-volt, 3.5HP, 19-spline motor.

Used On: E-Z-Go electric, 88-UP (Non DCS); Yamaha electric.

72084-G01FILTER, FUEL, CC, EZ, YAM

In-line 1/4" - 5/16" clear plastic filter with stepped flange.

Used On: Club Car; E-Z-Go 4-cycle gas, 94-UP (Medalist/TXT); Yamaha 2-cycle gas, 78-89 (G1) and 4-cycle gas, 94-UP (G14, G16,G20.G21.G22).

JN3-F4560-00JN6-F4560-O0

721RAMP SHOE, YAM 92-UP

Injection molded ramp shoe for driven clutch. Used in P/N 16070 spring seat.

Used On: Yamaha 4-cycle gas. 92-UP (G9, 014.016.020.021,622).

JN6E7688-00 JN7-17688-00

727FLOORMAT, DRIVER, G8/G14-G22

Die cut 3/16" thick masticated rubber with a pebble-texture finish. Measures approximately 6-7/8" W on one end and 7-11/16" W on other end X12-11/16" L Has 5 punched holes.

Used On: Yamaha 4-cycle gas and electric, 90-UP (G8, G14. G16, G19, G20. G21. G22).

JF2-K8231-10JN6-K8231-00

728FLOORMAT. PASS, G8/G14-G22

Die cut 3/16" thick masticated rubber with a pebble-texture finish. Measures approximately 9-1/4" W at top x 12-11/16" W at bottom x 19-11/16" L Has 8 punched holes.

Used On: Yamaha 4-cycle gas and electric, 90-UP <G8, G14, G16. G19, G20, G21. G22).

JF2-K8232-10JN6-K8232-00

729 FLOORMAT, LOWER, G8/G14G22

Die cut 3/16' thick masticated rubber with a pebble-texture finish. Measures approximately 41-3/8" W at top x 43" W at bottom x 18-1/2" H (except in accelerator and brake pedal area, which measures 20-1/16').

Used On: Yamaha 4-cycle gas and electric, 90-UP (G8, G14, G16, G19, G20, G21, G22}.

JF2-K8233O1JN6-K8233-00

74509-76

VOLTAGE REGULATOR

For use with Hitachi style starter-generator. Used On: Hyundai gas, 91- UP

750COUPLER, 19 SPLINE, EZ 88-96

Hardened steel coupling for repairing damaged splines on motor input shaft.

Used On: E-Z-Go electric. 88-96 (GE, 19 spline motors); Yamaha (GE 19-splinemotors)

751POT BOX, PB-6 STYLE

Curtis PB-6 style, with lever and return spring.

Used On: For most applications using Curtis controller.

801RAMP SHOE, YAM 78-91

Injection molded from durable nylon for secondary drive. Used in P/N J38-46284-00 spring seat.

Used On: Yamaha gas, 78-91 (G1, G2, G8, G9).

801-17688-00801-17688-01

801-17688-10J17-17688-00

805DECAL, F & R, YAM G 1,78-89

Black letters on brush-chrome background.

Used On: Yamaha 2-cycle gas and electric, 78-89 (G1).

J10-77741-00

811STARTER GENERATOR

Hitachi style. (Pulley not included!) Used On: Hyundai gas, 90-UP (HGG1)

812 PISTON PIN, YAM G2/G8/G9

Made of high temperature steel.

Used On: Yamaha 4-cycle gas, 85-94 (G2, G8, G9).

2F1-11633-00

813 A

VALVE, INTAKE, YAM G2/G8/G9/G14

Uses P/N 5H0-12119-00 valve seal ( NOT included).

Used On: Yamaha 4-cycle gas, 85-95 (G2, G8_t G9, G14).

J38-12111-00

J38-12111-01

VALVE, EXHAUST, YAM G2/G8/G9/G14

Used On: Yamaha 4-cycle gas, 85-95 <G2, G8, G9, G14).

J38-12121-00

J38-12121-01

PISTON ASSEMBLY,.25MM,G2/G8/G9

9999901892 J38-11635-01

J38-11635-00

99999-01891 J38-11631-01

J38-11631-00

PISTON ASSEMBLY..50MM,G2/G8/G9

$49.90 UM: KIT

99999-01893 J38-11636-01

J38-11636-00

99999-01891 J38-11631-01

J38-11631-00

819

GASKET. VALVE COVER, YAM G2G11

Die-cut gasket.

Used On: Yamaha 4-cycle gas, 85-94 (G2, G8. G9. G11).

J38-11193-00 JN3-11193-00

J38-11193-01

820

GASKET, HEAD, YAM G2-G11

Die-stamped aluminum "crush-type" gasket.

Used On: Yamaha 4-cyde gas, 85-94 (G2, G8, G9, G11).

J38-11181-00

821BATTERY HOLD DOWN, YAM G1-G14

Molded of corrosion-proof black plastic, . with two drilled mount holes. Measures

approximately 11-1/4" long.

Used On: Yamaha gas, 78-95 <G1, G2, G8, G9, G14).

J10-82136-00J17-82136-00

J55-H213600J55-K2136-00

822 RETAINING RING, YAM G2/G8/G9

Wire-type retaining ring.

Used On: Yamaha 4-cycle gas, 85-94 IG2, G8, G9).

93450-19047

825SHOCK, FRONT, YAM G2/G9 (2, 20)

Molded rubber bushing with sleeve mount both ends, with 9-coil spring. Extended length is 12-1/8", measured end to end.

Used On: Yamaha 4-cycle gas, 85-94 (G2, G9).

J38-23350-00 J38-23350-01

JG5-F3350-00JG5-F3350-01

826 SHOCK, REAR, YAM G2/G9 (2,20)

Molded rubber bushing with sleeve mount both ends, and 11-coil spring. Extended length is 12-5/8", measured end to end.

Used On: Yamaha 4-cycle gas, 85-94 (G2, G9).

J38-2221O-OOJ38-22210-01

JG5-F2210-00JG5-F221O-W0

3936-HYUNDAI

OIL SEAL.AXLE

Oil seal for Dana style differentials. Used On: Hyundai

82918-79BRUSH SET, MOTOR, CC, CHD, YAM

_p ^ Set of 4 brushes for Hitachi electric V I L \ motors. Measures approximately 1-1/8" Lx IB !? P» *? 23/32' W x 5/8" thick.

Used On: Club Car electric, 80-84; Columbia/Harley electric; Yamaha electric, 80-88 (G1, G2>. Hitachi electric motors only.

J14-81811-10

830TIE ROD END, RT THR, G2-G14(5O)

Right hand thread for passenger side.

Used On: Yamaha 4-cycle gas, 85-95 (G2, G8, G9, G14).

External threads

831 TIE ROD END, LT THR, G2G14(50)

Left-hand thread for driver side.

Used On: Yamaha 4-cycle gas, 85-95 (G2, G8, G9. G14).

External threads

832GASKET, EXHAUST COVER, G2-G14

Die-cut metal reinforced composition gasket. Measures approximately 2-1/8" between mount hole centers.

Used On: Yamaha 4-cycle gas, 85-95 <G2, G8, G9. G11.G14).

J38-14613-00J38-14613-01

CABLE, THROTTLE, YAM G2/8/9/14 Governor to carb

Flexible metal vinyl covered housing with stranded stainless-steel inner cable and moisture seal boots on each end. An extra 11-3/4" abrasion protection sheath is positioned over the housing. Approximate measurements: Housing: 15-3/4"; Cable: 21-5/8".

Used On: Yamaha 4-cycle gas, 85-96 IG2, G8, G9, G14).

J38-26312-00

J38-26312-01

834

CABLE, CHOKE, YAM G2/G9

Flexible metal vinyl covered housing with stranded stainless-steel inner cable, knob and knurled retaining nut. Overall cable length is approximately 34-3/8", measured from base of knob to end of clevis. Housing length is approximately 31-1/2".

Used On: Yamaha 4-cycle gas, 85-94 (G2, G9).

J38-26331-00 J55-F6331-01

J55-F6331-00

835GASKET, CARBURETOR, YAM G2-G14

Die cut gasket. Measures approximately 1-5/16" between mount hole centers.

Used On: Yamaha 4-cycle gas, 85-95 (G2, G8.G9, G11.G14).

J38-13557-00 J38-13557-01

836 VALVE, RELEASE, YAM G1/G2/G8/G9

Ventilates fuel tank. (Does NOT include grommet)

Used On: Yamaha gas, 85-94 {G1, G2, G8, J24-24460-00 J24-24460-01

839BATTERY HOLD DOWN. YAM G1-G9

Painted to prevent rust, inner core made from solid steel.

Used On: Hyundai electric, 91-UP (HGB-1, HGB-1 A); Yamaha electric, 80-94 (G1, G2. G8. G9).

J1482136-O0 J41-82136-00 J41-82136-01

839

BATTERY HOLD DOWN

Vinyl dipped to prevent battery corrosion, inner core made from solid steel.

Used On: Hyundai electric, 91-UP (HGB-1. HGB-1A).

841

TIE ROD END, RT THR, YAM G1

Includes grease fitting, seal, castellated-nut and cotter key. Right hand thread for passenger side.

Used On: Yamaha 2-cycle gas and electric, 79-89 <G1).

J10-2384M0

844SPACER, INPUT SHAFT. G2G22

19-spline spacer. Measures approximately 1.42" 136mm) O.D. x .32" (8mm) W.

Used On: Yamaha 4-cycle gas, 85UP (G2. G8. G9. G14. G16. G20, G21. G22).

J38-46322-O9J55-46322-09

845TIE ROD END, LT THR, YAM G1

Includes grease fitting, seal, castellated-nut and cotter key. Left hand thread for driver side.

Used On: Yamaha 2-cycle gas and electric, 79-89 (G1).

J10-23845-10

846KING PIN, HYUN.

Top quality machined steel, zinc plated for protection. Measures approximately .590" <14.98mm) O.D. x 4.625* (117.46mm) L

Used On: Hyundai gas and electric, 90-UP;

849KING PIN KIT, YAM G2-G21

Kit includes: king pins (2), lower metal bushings (2) and upper metal bushings (2).

Used On:

Yamaha 4-cycle gas and electric, 85-02 (G2, G8, G9, G14. G16, G19, G20, G21).

850SHEAVE, FIXED, YAM 78-UP

Cast aluminum sheave. Has a steel insert with tapered hole and machined slot for key. Uses P/N 90280-05022 woodruff key (NOT included).

Used On: Yamaha gas, 78-UP <G1, G2, G8, G9, G11. G14, G16, G20, G21, G22).

J38-46260-00 J55-G6260-00

JN6-G6260-QO

853OIL SEAL, TRANS SIDE, YAM G2-G14

Seal measures approximately 1.13" (28.7mm) I.D x 1.78" (45.2mm) x .31" (7.9mm) W.

Used On: Yamaha 4-cycle gas, 85-95 (G2, G8, G9, G14).

Tips: Transmission side seal for G16 is P/N 854.

93102-30195

854 OIL SEAL. IGN SIDE, YAM G2-G16

Seal measures approximately 1.33 (33.9mm) I.D. x 1.97 (50.1mm) O.D. x .31 (7.9mm) W.

Used On: Yamaha 4-cycle gas, 85-UP <G2, G8, G9, G14,G16).

Tips: G16 model uses the same seal for both the ignition and transmission side.

93102-35191

863-21771-00

OIL CAP, YAM G1

Replace your lost or leaking cap with this durable injection molded replacement.

Used On: Yamaha 2-cycle gas, 78-89 (G1).

863BRAKE SHOES, EZ, YAM

Bendix style brake shoes. Measures approximately 1-3/16" W x 5-15/16" L

Used On: E-Z-Go 4-cycle gas, 97-UP, electric, 96-UP (Medalist/TXT); E-Z-Go gas, 96-UP (Workhorse ST350); Melex; Yamaha 4-cycle gas and electric, 94-UP (G9>.

JG5-F333000

867

KEY.YAMG11-G22

Replacement key for P/N 15433 ignition switch.

Used On: Yamaha 4-cycle gas and electric, 95-UP (Gil, G14, G16, G19, G2Q, G21, G22).

J44-82511-00 J44-82511-00-YY

J44-82511-00-XX

868FLOORMAT, YAM G8

Die-cut 3/16" thick masticated rubber with a pebble-texture finish. Measures approximately 40" W at top x 44" W at bottom x 31-1-4" h. Has 11 punched holes.

Used On: Yamaha 4-cycle gas and electric, 90-94 (G8).

JF2-K8233-00JF2-K8233-11

869CYLINDER ASSEMBLY, YAM G1

Includes cylinder, piston, piston pin and ^ retainers, rings, base gasket, head gasket

^_^ and exhaust gasket. O C^

Used On: Yamaha 2-cycle gas, 78-89 (G1).

1982 may require P/N 269, if J17 cylinder has not been previously converted.

872OIL SEAL, DRIVEN CLUTCH, YAM

Seal measures approximately .74" 118.9mm) I.D. x 1.19" (30.2mm) O.D. x .20" <5mm| W. Used in P/N 15664 sliding sheave. Two per sheave.

Used On: Yamaha gas, 78-UP (G1, G2. G8, G9, G14. G16, G20, G21, G22).

93102-2030993109-20014

90202-20130WASHER, PLATE, YAM G1-G22

Used between the sliding and stationary sheaves of the driven clutch.

Used On: Yamaha gas, 82-UP (G1. G2, G8, G9, G14, G16, G20, G21,G22)

90508-45679SPRING, YAM G2-G9

Compression-type 7-coil spring. Used with P/Ns 850 and 15664 sliding sheaves.

Used On: Yamaha 4-cycle gas, 85-94 (G2, G8, G9).

Tips: Be sure to watch models and years in order to avoid confusion with the spring P/N 16039.

16046-HSTOP SWITCH

Accelerator actuated plunger-type switch with plastic housing, rubber moisture boot and two plastic adjustment nuts. Has two lead wires with male bullet-type connectors.

Used on some Hyundai carts. This part is non returnable

93PULLER, CLUTCH, COMET STYLE

For removing all Comet-style, 94 series clutches.

Used On: Many applications.

935FILTER, AIR, YAM G16-G22 (24)

Flat panel type filter, paper element with expanded side screen.

Used On: Yamaha 4-cycle gas, 96-UP (G16, G20, G21, G22).

Tips: If a foam "pre-filter" is installed, it should be cleaned before re-installing with new filter. (Refer to maintenance manual for instructions.) If there is no pre-filter installed, order IMC P/N 938.

JN6-E4450-00 JN6-E4450-01

938

PREFILTER. YAM G16-G22

Foam "pre-filter" for use with P/N 935 filter.

Used On: Yamaha 4-cycle gas, 96-UP (G16, G20, G21, G22).

JN6-E445E-00

1012834

BUSHING,DRIVEN CLUTCH

Fiber-glide type bushing for driven sheave. Measures approximately 1.536" 139.01 mm) O.D. x 1.377' (34.97mm) I.D. x 1.5" <38.10mm) L

Used On: Hyundai gas, 91-96.

Variable speed primary drive unit that is calibrated to provide quiet, efficient, sensitive and smooth operation.

94Y1

CLUTCH, DRIVE, YAM G1

Variable speed primary drive unit, calibrated to provide quiet, efficient, sensitive and smooth operation at all speeds. Includes oil pump drive gear.

Used On: Yamaha 2-cycle gas, 78-89 (G1).

ttf

94Y2

Variable speed primary drive unit that is calibrated to provide quiet, efficient, sensitive and smooth operation.

CLUTCH, DRIVE, YAM G2/G8/G9

Variable speed primary drive unit, calibrated to provide quiet, efficient, sensitive and smooth operation at all speeds.

Used On: Yamaha 4-cycle gas, 85-94 (G2, G8,G9,G14, G16. G20, G21>.

974

FILTER, AIR, YAM G1/G14 (12)

Oil impregnated paper element, perforated metal inner liner, metal end caps, O-ring top seal and cushion insert.

Used On: Yamaha 2-cycle gas, 78-89 IG1) and 4-cycle gas, 94-95 (G14).

J10-14450-00 JF7-14450-01

J10-14450-01

99999-01830

WEIGHT UNK KIT, YAM G2-G9

Includes P/N 90202-07164 plastic washers (2), P/N 90202-07186 plastic washers |2), P/N 90387-076U6 collar (1), and P/N JN5-46205-00 weight link assembly (1).

Used On: Yamaha 4-cycle gas. 85-94 (G2, G8, G9>.

Electric Cart

Hyundai LH axle shaft

Use bearing 3870-HYUNDAI & seal 3936-HYUNDAI ordered separately

10$

GB1-353031

Hyundai electric cart RH brake cable

Picture of cable may not look like the one being replaced.

GB1 -353032 Hyundai electric cart LH brake cable

Picture of cable may not look like the one being replaced.

GB1-808001 ₂₉ ₃₀

INCLUDES 1-33

GC1-604110COVER, BOTTOM WHITE, HYUN 90-UP

Molded one-piece white heavy-duty vinyl cover. Matches OEM pattern.

Used On: Hyundai gas and electric 90-UP.

GC1-604150

COVER. BACK WHITE, HYUN 90-UP

Molded one-piece white heavy-duty vinyl cover. Matches OEM pattern.

Used On: Hyundai gas and electric 90-UR

ONLY ONE liEFT

<&>

RODUCTION

ONLY ONE LEFT

GG1-111000

Includes

Hyundai crank case seal

PISTON PIN,

Made of high temperature steel. Used On: Hyundai gas engine

PISTON PIN CLIP,

Wire-type retaining ring for piston pin. Used On: Hyundai gas engine

Plate Oil Splasher

GG1-119010

DISCONITUED

DISCONITUED BATTERY IGNITER

li'W^f*

TRANSAXLE ASS'Y (NEW STYLE) •?•??« #A004331 AND ABOVE

INCLUDESEVERYTHNGSHOWN

^j&~,*--^

Gas Cart

Hyundai LH axle shaft

Use bearing 3870-HYUNDAI ordered separately

Gas Cart

Hyundai RH axle shaft

Use bearing 3870-HYUNDAI ordered separately

Picture not exact

GG1-211730 OLD TYPE

^ if*

^ *^J

GG1 -211732 NEW TYPE

^ if*

^ *^J

J10-14833-01 JOINT.GOV. UNK R/H, YAM G1

Injection molded, right hand threaded end for throttle linkage.

Used On: Yamaha 2-cycle gas, 78-89 (G1). J10-14833-00

J10-14864-01JOINT,GOV. LINK L/H, YAM G1

Injection molded, left hand threaded end for throttle linkage.

Used On: Yamaha 2-cycle gas, 78-89 (G1). J10-14864-00

J10-24410-03

FUEL PUMP, YAM 78-89

Mikuni pump, aluminum housing.

Used On: Yamaha 2-cycle gas, 78-89 (2-cycle).

J10-24611-00

GAS CAP, YAM G1 78-89

Direct replacement, same quality as OEM. Used On: Yamaha 2-cycle gas, 78-89 (G1).

J14-86153-00

CONTACT, MOVABLE, YAM 82-92

Copper contact block for movable wiper arm.

Used On: Yamaha electric, 82-92; Taylor

Dunn.

J22-86152-00

WIPER ARM, SPEED SWITCH, YAM

Injection molded holds wiper contact.

Used On: Yamaha electric, 82-92 (G1, G2, G8. G9}.

J38-11656-00BEARING, CON ROD, YAM G2-G14

Bearing insert, connecting rod. Measures approximately .06" (15.2mm) thick x .78" (19.8mm) W. Two required per car.

Used On: Yamaha 4-cycle gas, 85-95 (G2, G8, G9, G14).

J38-15451-02GASKET, CRANKCASE COVER, G2-G14

Die-cut gasket, 11 holes.

Used On: Yamaha 4-cycle gas, 85-95 (G2, ,/ G8, G9, G11,G14).

>»—cTJ38-15451-00J38-15451-01

J38-46237-00

PIN, WEIGHT, SHORT, YAM G2/G8/G9

Short pin tor drive clutch weight.

Used On: Yamaha 4-cycle gas, 85-94 (G2 G8, G9).

J38-46236-00 PIN, WEIGHT, LONG, YAM G2/G8/G9

Long pin for drive clutch weight.

Used On: Yamaha 4-cycle gas, 85-94 (G2, G8, G9>.

J38-46237-00

PIN, WEIGHT, SHORT, YAM G2/G8/G9

Short pin tor drive clutch weight.

Used On: Yamaha 4-cycle gas, 85-94 (G2 G8, G9).

J38-46284-00SPRING SEAT, YAM G2-G9

Spring seat or cam for driven clutch. Used with P/Ns 850 and 15664 sliding sheaves.

Used On: Yamaha 4-cycle gas, 85-94 (G2, G8. G9>.

Tips: Be sure to watch models and years in order to avoid confusion with the spring seat P/N 16070.

J38-82305-20

IGNITOR. YAM G2

Ignitor unit with rubber mounting sleeve. Plastic housing had molded 9-pin snap in connector.

Used On: Yamaha 4-cyde gas, 85-91 (G2).

J55-82510-00 KEY SWITCH. YAM G2-G11

Black plastic housing with P/N 224SK keys (2), wire harness, plug-in connectors and rubber seal boot.

Used On: Yamaha 4-cycle gas and electric, 85-95 IG2, G8, G9, G11).

J38-82510-00

J55-F6311-00

CABLE. THROTTLE, YAM G2/G9

Flexible metal vinyl covered housing with stranded stainless-steel inner cable and moisture seals on each end. An extra 15-1/2" abrasion protection sheath is positioned over the housing. Approximate measurements: Housing: 57-578"; Cable: 63-5/8*.

Used On: Yamaha 4-cycle gas, 85-94 (G2, G9).

J38-26311-00

J55-K8167-00

BUMPER END CAR DRIVER, G2/G9

Hear bumper end cap, injection molded of high-impact polyethylene.

Used On: Yamaha 4-cycle gas and electric, 85-94 (G2, G9>.

J38-78167-00

J55-K8168-00

BUMPER END CAP, PASSENGER G2/G9

Rear bumper end cap, injection molded of high-impact polyethylene.

Used On: Yamaha 4-cycle gas and electric, 85-94 {G2. G9».

J38-78168-00

J55-K8272-00 INLET COVER, YAM G2/G9

Cover for gas cap or charger plug. Injection molded from color-matched, durable high-impact plastic.

Used On: Yamaha 4-cvcle gas and electric, 85-94 (G2, G9).

J38-78272-00

JF2-8230500 IGNITOR. YAM G8

Ignitor unit with 6-wire harness and plastic snap-in connector. Mount tab holes measure approximately 3-5/16" between centers.

Used On:Yamaha 4-cycle gas, 90-94 (G8).

JF7-82817-20 STOP SWITCH, YAM G14/G16

Plunger-type switch with dual connection "push-on" female plug. Wires are approximately 8-3/4" long.

Used On: Yamaha 4-cycle gas, 95-UP (G14, G16).

JN3-F631100 CABLE,THROTTLE,YAM G14/G16/G22

Flexible metal vinyl covered housing with stranded stainless-steel inner cable and moisture seals on each end. An extra 31-3/4" abrasion protection sheath is positioned over the housing at clevis end. Approximate measurements: Housing: 59-1/2*; Cable {including clevis): 61-1/8".

Used On: Yamaha 4-cycle gas, 95-UP (G14, G16, G22).

YG-1876PULLER, CLUTCH, YAM G1-G9, 78-94

Removes OEM clutch from the crankshaft. Used On: Yamaha 78-94 (Gi, G2, G8, G9). 90890-01876



	1011420BRUSH SPRING, CC, CHD, YAM

		Brush tension spring. Used On: Club Car electric, 80-84; Columbia/Harley electric, 76-81; Yamaha electric, 79-91. Hitachi electric motors only. J14-81813-10



	105 LIGHT KIT, RECESSED, YAM G14-G22

	Includes a pair of rectangular halogen headlights, amber front running lights, red rear tail lights, wiring, connectors, switch and complete installation instructions. Molded of black, high-impact ABS plastic. Used On: Yamaha 4-cycle gas and electric, 95-UP (G14, G16, G19, G20, G21, G22).



	'"'Mitiiimu»



	106 LIGHT KIT, RECESSED, HYUN 90-UP Includes a pair of rectangular halogen headlights, amber front running lights, red rear tail lights, wiring, connectors, switch and complete installation instructions. Molded of black, high-impact ABS plastic. Used On: Hyundai gas and electric, 90-UP.

	II i it i«<"" \ \\\\\\\*



	106ABEZEL & HEADLIGHT, HYUN 90-UP Includes a pair of rectangular halogen headlights with left and right bezels. Does not include wiring harness, taillights, or connectors.



	107 LIGHT KIT, RECESSED, YAM G2/G9 Includes a pair of rectangular halogen headlights, amber front running lights, red rear tail lights, wiring, connectors, switch and complete installation instructions. Molded of black, high-impact ABS plastic. Used On: Yamaha 4-cycle gas and electric, 85-94 (G2, G9).

	*******
	fcfcfct



	15203MOTOR, 36-48V, 4HP, 10SP, CC, YAM

		36/48-volt, 4 HP, 10-spline motor. Used On: Club Car electric, 84-UP; Yamaha electric, 89-93 1/2.



	15432SPARK PLUG. B5ES {4,120)

	NGK B5ES. Used On: Yamaha 4-cycle gas, 85-93 (G2). NGK-B5ESO-00



	15437ARMATURE, STARTER, EZ, YAM G16

		Armature only. Used On: E-Z-Go 4-cycle gas. 91-UP; Yamaha 4-cycle gas, 96-UP (G16). JN3-H1150-00



	15438STARTER GENERATOR, YAM G16-G21

	ft	Hitachi-style starter-generator. Used On: Yamaha 4-cycle gas, 96-UP (G16, G20, G21). JN6-H110000



	CABLE, CHOKE, SEAT MOUNT, YAM G16 Flexible metal vinyl covered housing with stranded stainless-steel inner cable, knob and knurled retaining nut. Overall cable length is approximately 11-3/4", measured from base of knob to end of clevis. Housing length is approximately 9-1/8". An additional 2-5/8" long outer rubber protection sleeve is crimped to housing approximately 1-7/8" from clevis end. Mounts below seat. Used On: Yamaha 4-cycle gas, 96-UP (G16) JN6-F6331-00



15444	GASKET, CRANKCASE, YAM G11-G22

	Die cut gasket. Used On: Yamaha 4-cycle gas, 96-UP (Gil, G16, G20, G21.G22).
	JN6-15451-00 JN6-15451-09	JN6-15451-O2



	15445	VALVE, EXHAUST, YAM G11/G16-G22 Used On: Yamaha 4-cycie gas, 96-UP (G11, G16, G20, G21_rG22). JN6-12121-00





	PISTON ASSEMBLY,.50MM,YAM G16-G22 Aluminum alloy. Includes rings, piston pin and retainers. Used On: Yamaha 4-cycle gas, 96-UP (G16, G20, G21.G22). Tips: Before installing rings on piston, always check to insure that you have the proper end-gap clearance when rings are inserted in cylinder. Consult the manufacturer's maintenance manual for proper specifications and complete installation instructions. JN6-11636-00





	PISTON ASSEMBLY,.25MM,YAM G16-G22 Aluminum alloy. Includes rings, piston pin and retainers. Used On: Yamaha 4-cycle gas, 96-UP (G16, G20, G21.G22). Tips: Before installing rings on piston, always check to insure that you have the proper end-gap clearance when rings are inserted in cylinder. Consult the manufacturer's maintenance manual for proper specifications and complete installation instructions. JN6-11635-00





	RING SET,.50MM,YAM G16-G22 Five ring set. Used On: Yamaha 4-cycle gas, 96-UP (G16, G20, G21, G22). Tips: Before installing rings on piston, always check to insure that you have the proper end-gap clearance when rings are inserted in cylinder. Consult the manufacturer's maintenance manual for proper specifications and complete installation instructions. JN6-11610-20





	RING SET..25MM.YAM G16-G22 Five ring set. Used On: Yamaha 4-cycle gas, 96-UP (G16 G20, G21, G22). Tips: Before installing rings on piston always check to insure that you have the proper end-gap clearance when rings arc inserted in cylinder. Consult the manufacturer's maintenance manual foi proper specifications and complete installation instructions. JN6-11610-10





	RING SET, STD, YAM G16-G22

	Five ring set. Used On: Yamaha 4-cycle gas, 96-UP (G16, G20, G21, G22). Tips: Before installing rings on piston, always check to insure that you have the proper end-gap clearance when rings are inserted in cylinder. Consult the manufacturer's maintenance manual for proper specifications and complete installation instructions. JN6-11610-00



	15453	GASKET, HEAD, YAM G16G22 Die-stamped aluminum "crush-type" gasket. Used On: Yamaha 4-cycle gas. 96-UP (G16, G20, G21, G22). JN6-11181-00



	15454	GASKET, BREATHER, YAM G11/G16

		Die-cut gasket. Used On; Yamaha 4-cycle gas, 96-UP (Gil, G16). JN6-11169-00



	15456F&R SWITCH, YAM G14-G16

		Complete switch, less handle. Used On: Yamaha 36-volt electric, 94-UP (G14,G16). JN4-82917-00



	15459WHEEL HUB, REAR, YAM G8-G21

		Splined hub, machined to OEM specifications. Used On: Yamaha 4-cycle gas and electric, 92-02 (G8, G9. G14, G16, G19 G20, G21). JH7-G6514-00JN3-G6514-00



	15460F&R HANDLE. YAM G11-G16

		Injection molded handle. Used On: Yamaha gas and electric, 94-UP (G11.G14.G16). JN3-G6381-00



	15465 BUMPER, REAR, YAM G2/G9 One piece steel bumper is powder coated and includes mounting stays. Used On: Yamaha 4-cycle gas and electric, 84-94 (G2, G9). J38-78107-00-04JG5-K8107-00



	*————? uniiM «> mm-.___________- CABLE, ACCELERATOR, YAM G8**

	Flexible metal vinyl covered housing with stranded steel inner cable. Approximate measurements: Housing: 62-3/4"; Cable: 66-1/2". An extra 15-1/2" abrasion protection sheath is positioned over the housing at clevis end. Used On: Yamaha 4-cycle gas, 90-94 (G8). JF2-F631100 JF2-F6311-01



	RESISTOR COIL, YAM G1/G2/G9

		5-gauge wire, twenty-one coils. Used On: Yamaha electric, 78-92 (G1, G2. G9I. J14-8537000 J14-85370-02 J14-85371-00J14-85371 01 J51-85370-00 J56-85370-00



	15487	DUST SEAL, LOWER, YAM G2-G21

		King pin dust seal, lower. Used On: Yamaha 4-cycle gas and electric, 85-02 (G2, G8, G9, Gil. G14, G16, G19, G20,G21).

	J38-23528-00



	15488DUST SEAL, UPPER. YAM G2-G21

		King pin dust seal, upper. Used On: Yamaha 4-cycle gas and electric, 85-02 (G2, G8, G9, G11, G14, G16, G19, G20, G21). J38-23527-00





	PISTON ASSEMBLY, STD, G2/G8/G9 Aluminum alloy. Includes rings, piston pin and retainers. Used On: Yamaha 4-cycle gas, 85-94 (G2, G8, G9). Tips: Before installing rings on piston, always check to insure that you have the proper end-gap clearance when rings are inserted in cylinder. Consult the manufacturer's maintenance manual for proper specifications and complete installation instructions. 99999-01891J38-11631-00 J38-11631-01





	RING SET,.50MM,YAM G2/G8/G9 Four ring set. Used On: Yamaha 4-cycle gas, 85-94 (G2, G8, G9). Tips: Before installing rings on piston, always check to insure that you have the proper end-gap clearance when rings are inserted in cylinder. Consult the manufacturer's maintenance manual for proper specifications and complete installation instructions. J38-11610-20





	RING SET,.25MM,YAM G2/G8/G9 Four ring set. Used On: Yamaha 4-cycle gas, 85-94 (G2, G8, G9). Tips: Before installing rings on piston, always check to insure that you have the proper end-gap clearance when rings are inserted in cylinder. Consult the manufacturer's maintenance manual for proper specifications and complete installation instructions. J38-11610-10